http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Bubble Column 에 있어서의 Gas Hold - up 에 미치는 부유물의 영향에 관한 연구
김주봉,손진언,김상열 한국화학공학회 1971 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.9 No.1
The effect of the solid suspension to the gas hold-up in the bubble column was studied where by; (1) The relation between the gas velocity (U_G) and the gas hold-up (1-φ) in the independent bubble flow range (U_G≒0∼7 ㎝/sec) at different specific gravity of solid suspension and its weight was linear, while in the blow up flow range of bubbles the gas hold-up was constant to the gas velocity. (2) In the independent bubbles flow range, the relation among the gas hold-up (1-φ), the specific gravity (ρ) of solid suspension and its weight (W), the gas velocity (U_G) appeared as follows; (1-φ)=0.3567ρ-3.044W-0.4726U_G
김주봉,이병선,하기성 한국화학공학회 1988 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.26 No.6
國産活性炭을 사용하여 수처리를 중심으로 現場설계에 있어서 기초자료획득을 위한 基礎硏究의 一還으로, 活成炭에 대한 基礎物性 調査를 行함과 아울러 Phenol, ONP, MNP, PNP의 有機化合物을 中心으로 吸着特性에 對한 實驗을 行하였다. 본 실험을 통하여 吸着塔 設計에 있어서의 基礎 data인 吸着 平衡 關係는 Freundlich의 흡착등온식에 의해 정리되었으며 이때 n값은 4.0-6.8 범위이였다. 그리고 각 유기물의 粒子內 擴散係數를 이론적 해석과 실험을 통하여 算出하여 본 결과 有效表面擴散係數의 값은 293K의 경우 0.36-1.2×10^(-12)m²/S의 範圍로 活性化에너지는 7.1-8.3 ㎉/㏖의 範圍임이 밝혀졌다. To obtain the basic engineering data such as equilibrium relationship and intraparticle diffusion coefficients for the design of activated carbon treatment plant, adsorption test of Korean activated carbon was performed with phenol, ONP, MNP and PNP. Through this experiment adsorption equilibrium relation was correlated by Freundlich equation and its n values were ranged from 4.0 to 6.8. Also the intraparticle diffusion coefficients were determined from adsorption rate measurement in a stirred tank. The effective diffusion coefficients of phenol and three nitrophenol isomer were in the range or 0.36-1.2×10^(-12)m²/s at 293K and the activation energy for diffusion was evaluated as 7.1-8.3 ㎉/㏖.
실내모형실험과 개별요소법을 이용한 지반 공동 및 이완영역 모사에 관한 연구
김주봉(Joo-Bong Kim),유승경(Seung-Kyong You),한중근(Jung-Geun Han),홍기권(Gi-Gwon Hong),박종범(Jong-Beom Park) 한국지반신소재학회 2017 한국지반신소재학회 논문집 Vol.16 No.2
지반함몰의 발생은 하수관 파손으로 인한 토사유실이 주원인으로써 그 대책을 수립하기 위해서는 공동과 이완영역의 발생, 주변 지반의 거동을 이해하여야 할 필요성이 있다. 본 논문에서는 지중 하수관의 파손으로 인한 지반함몰 메커니즘 분석을 위해 실내모형실험과 개별요소 수치해석을 실시하였다. 실내모형실험에서는 알루미늄 봉과 트랩도어를 이용하여 모형지반의 거동을 모사하였고, 개별요소 수치해석은 모형실험과 동일한 경계조건으로 수행하여 그 결과를 모형실험 결과와 비교분석 하였다. 모형실험 및 개별요소 결과로부터 토사유실로 인한 공동과 이완영역의 형상 및 규모를 파악하였으며, 공동 주변 지반의 간극비 분포 특성 및 이완정도를 파악할 수 있었다. Ground subsidence mainly occurs due to the soil wash-away caused by cracked sewer pipes. It is necessary to understand the behavior surrounding soils with the formation of cavity and relaxation zone to set up counterplan. In this paper, a series of laboratory model tests and numerical analyses (Discrete Element Method) were performed to investigate the ground subsidence mechanism due to sewer pipe damage. For model tests, aluminum rod and trap door were used to simulate the behavior of model ground. Test results were compared with the numerical analyses conducted under the same boundary conditions with model tests. From this study, it was investigated the shape and size of cavity and relaxation zone due to the soil wash-away and a void ratio distribution of surrounding soils with relaxation properties.