http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
서영수,손효석,전형식,정희택,Seo, Young-Soo,Son, Hyo-Sok,Chun, Hyong-Sik,Chung, Hee-Taeg 한국유체기계학회 1999 한국유체기계학회 논문집 Vol.2 No.2
The pump safety related to the functions in nuclear power plants must be designed to meet load conditions considering seismic requirements. In order to satisfy both structural integrity and operability of these pumps, the initial step in the seismic qualification is to establish the resonant frequencies of the structure. Applications we made to the design of the vertical and horizontal type pump. Computational results are analyzed with respect to the dynamic characteristics and are compared to the expected design requirements.
3kW 급 수직 풍력 발전기의 구조적 안정성을 위한 진동해석
서영수(Young Su, Seo),이형수(Hyoung Soo, Lee),이승헌(Seung Heon, Lee),최상록(Sang Ruk, Choi),이희관(Hee Gwan, Lee),양균의(Gyun Eui, Yang) (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.2
본 논문에서는 3kW 급 수직 풍력 발전기의 운용에 따라 발생할 수 있는 공진의 위험성을 최소화 하기 위하여 진동해석을 기반으로 하부구조물의 설계 변수에 따른 경향을 분석하였다. 진동해석의 경우 블레이드, 허브, 발전기 등으로 구성된 상부 구조물의 경우 질점(Point mass)를 이용하여 단순화하여 진행하였다. 최종 설계된 형상을 기반으로 하부 구조물에 대해 진동해석을 수행하고 운용 회전 속도 구간내의 고유진동수 및 모드 형상을 도출하고, 설계 변수에 따른 경향을 분석하였다.
표면개질처리가 적용된 분리형 인공수지관절 구조 해석에 관한 연구.
서영수(Young Soo Seo),박찬희(Chan Hee Park),이형수(Hyung Soo Lee),이정호(Hyung Soo Lee),박상수(Sang Soo Park),이지성(Jee Sung Lee),김철생(Cheol Sang Kim) (사)한국CDE학회 2014 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2014 No.2
인공수지관절이란 수지관절에 문제가 발생될 때 사용하는 제품으로 수지관절을 대체하여 원활한 움직임을 가질 수 있도록 제작되는 인공의료기기 이다. 인공수지관절은 주로 티타늄이나 고분자 재질로 만들어지는데, 그 종단부 표면은 뛰어난 내마모성과 고윤활성을 가짐과 동시에 생체친화성을 가져야 한다. 본 연구에서는 유한요소법을 이용하여 초기 형상에 따른 구조 해석을 수행하였다. 해석에 적용된 재료와 구조는 크게 타이타늄(CP-Ti)과 실리콘(Silicone) 모델 2 가지이며, 각 조건에 따른 해석 결과를 비교 분석하여 인공 수지 관절 최적 설계안을 도출 하고자 하였다. 각 조건에 따른 해석 결과를 비교 분석한 결과, 본 연구에서 도안한 타이타늄(CP-Ti) 모델과 실리콘(Silicone) 모델에서 다양한 조건하에서 ASTM F04.33 의 구체적인 기준과 큰 차이가 없음을 확인 하였다.
전력용 IGBT의 미시적인 모델링에 의한 소자특성 및 전압형 인버터 시뮬레이션
서영수(Young-Soo Seo),백동현(Dong-Byun Baek),조문택(Moon-Tack Cho),이상훈(Sang-Hun Lee),허종명(Jong-Myung Heo) 전력전자학회 1996 전력전자학술대회 논문집 Vol.1996 No.-
An micro model for the power Insulated Gate Bipolar Transistor(lGBT) is developed The, model consistently described the IGBT stealy-state current-voltage char ̄acteristics and switching transient current and voltage waveform for all loa야ng conditions. The model is based on the equivalent circuit of a MOSFET with supplies Ow base current to a low-l4nin, high-level injection, bipolar transistor with its base virtual contact fit the collector and of thr base Model results are compared with measured turn-on and turn-off waveform for different dhive, load, and feedback circuils.
속도검출기없는 전압형 Inverter에 의한 유도전동기 속도제어
서영수(Young-Soo Seo),이춘상(Chun-Sang Lee),황락훈(Lak-Hoon Hwang),김주래(Ju-Rae Kim),조문택(Moon-Tack Cho) 전력전자학회 2001 전력전자학술대회 논문집 Vol.2001 No.7
When the vector control, which does not need a speed signal from a mechanical speed sensor, it is possible to reduce the cost of the control equipment and to improve the control performance in many industrial application.<br/> This paper describes a rotor speed identification method of induction motor based on the theory of flux model reference adaptive system. The estimator execute the rotor speed identification so that the vector control of the induction motor may be achieved. The improved auxiliary variable of the two model are introduced to perform accurate rotor speed estimation.<br/> The control system is composed of the PI controller for speed control and current controller using space voltage vector PWM technique. High speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor Validity of the proposed control method is verified through simulation and experimental result.