http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최태운 慶星大學校 1996 論文集 Vol.17 No.2
The oxidation of MgO-C binary refractories was studied at the temperatures ranging from 1200℃ to 1700℃. It is shown that increasing sintering time results in the increase of porosity and weight loss.
Clay plate에서의 가압 압력 및 고결제 첨가에 따른 특성변화
최태운 경성대학교 공학기술연구소 2003 공학기술연구지 Vol.S1 No.2
Effects of the applied pressure and additives on the physical properties of clay plate were studied. The pressures applied to form clay plate was ranging from 100-300 ton. The highest strength of clay plate was obtained from the clay plate pressed at 300 ton. As the addition of Na₂SiO₃ increases, the shrinkage as well as the Marshall strength increases. The optimum addition of Na₂SiO₃ was 5.0 wt.% in view of the shrinkage and Marshall strength.
최태운 경성대학교 공학기술연구소 1998 공학기술연구지 Vol.5 No.-
The addition of CaCO₃increase the binding force on the SiO₂particles at 1300℃, due to the melting of the CaCO₃particles. This can prevent the sands from the dislocation, thus it could result in minimizing defects density. In addition, the 5.0 wt.% content of CaCO₃showed the effective results with the pore density of 15%.
질소이온 주입에 의한 Al의 재결정화 및 AIN의 형성에 관한 연구
김용희,조성진,최태운 慶星大學校 1992 論文集 Vol.13 No.2
A 100keV ion accelerator is designed and constructed with the computer simulation method. The 10-stage C-W voltage multipler has been used as a high voltage power supply. To reduce the ripple ratio, switching power supply(32kHz, 10kV) has been used as a input power for C-W circuit. The ion source of the accelerator in uniquely designed with the RF gas ion source. When the N+ ions are implanted with 1×10???ions/㎠ on the vacuum deposited Al thin film, the recrystallization of the Al film is observed. At high doses(1×10???ions/㎠ implanted) the formation of AIN is confirmed by the analysis of the selective area electron diffraction pattern.
H₂-CO₂분위기하에서 Fe₂O₃의 환원반응에 관한 연구
최태운 경성대학교 1987 부산수산대학 논문집 Vol.8 No.3
The reduction reaction of Fe₂O₃under the hydrogen atmosphere are to controlled by the interface chemical reaction and the activation energy in boths the atmospheres for the Fe-stable and for FeO-stable state wer 12.45Kcal/mol, 10.08 Kcal/mol respectively.
자동용접이당제의 미세구조 및 접합특성에 미치는 융제의 첨가영향
최태운 경성대학교 2000 論文集 Vol.21 No.2
The addition of feldspar increases the binding force on the silica particles at 1300℃, due to the melting of the feldspar particles, this can prevent the sands from dislocation, thus it could result in minimizing defects density. In addition the 10wt% content of feldspar showed the effective results with the porosity of 10%.
기업의 문화마케팅이 고객충성도에 미치는 영향 : 문화마케팅 유형별 효과를 중심으로
최태운 한국문화예술경영학회 2010 문화예술경영학연구 Vol.3 No.1
본 연구에서 제시된 결과를 바탕으로 실무적 시사점을 제시하면 다음과 같다. 첫째, 기업이 상업적인 목적으로 문화를 이용하는 것은 소비자들이 기업의 문화마케팅을 부정적인 인식할 가능성이 있기 때문에, 문화판촉 보다는 문화지원이나 문화연출 등의 문화마케팅 활동을 통해서 문화예술의 장을 마련해주고, 즐기는 시간과 공간을 배려해 줌으로써 나아가 문화 기업의 이미지를 구축하고, 고객의 호의를 불러일으켜야 한다. 둘째, 문화마케팅을 계획하고 실행함에 있어서 기업이미지 또는 브랜드이미지의 어떤 측면을 부각시킬지 중점을 두어야 한다. 기업이 문화마케팅 전략을 구사할 때 부각시키고자 하는 기업 및 브랜드 이미지와 특성이 맞는 문화와의 접목을 통해 보다 높은 효과를 거두기 위한 전략을 수립할 필요가 있을 것이다.
N₂, N₂-H₂O 및 N₂-CO₂분위기하에서 Si-Al계의 반응(I)
최원형,최태운 경성대학교 1983 부산수산대학 논문집 Vol.4 No.2
The pellets of the Si-Al system were heated at 1300℃ in the atmospheres of N₂, N₂-H₂O and N₂-CO₂systems, respectively. X-ray diffraction analysis showed that β´-Si₃N₄, α-Al₂O₃ were formed after the reaction at 1300℃ in each atmospheres. The porosities of the heated specimens were 5% below.
산화분위기하에서 silicon Carbide의 반응기구
최원형,최태운 경성대학교 1984 부산수산대학 논문집 Vol.5 No.2
SiC powder was heated in air over the temperature range of 1100-1350℃.The β-cristobalite was formed on the surfaces of SiC particles by the reaction: SiC(s) + 2O₂(g) = SiO₂(s) + Co₂(g) It is assumed that the diffusion od oxygen ion through the formed surface layer of β-cristobalite controled oxidation of the SiC particles. The diffusion coefficient of oxygen ion through the β-cristobalite layer was obtained as the following equation: D=3.84 × ?? exp (-14.7/RT)