미니 임플란트 직경에 따른 피로파절강도의 비교 연구

허유리,손미경,김희중,최한철,정재헌 大韓齒科補綴學會 2012 대한치과보철학회지 Vol.50 No.3

Purpose: This study was conducted to obtain difference in fracture strength according to the diameter of one-body O-ring-type of mini implant fixture, to determine the resistance of mini implant to masticatory pressure, and to examine whether overdenture using O-ring type mini implant is clinically usable to maxillary and mandibular edentulous patients. Materials and methods: For this study, 13 mm long one body O-ring-type mini implants of different diameters (2.0 mm, 2.5 mm and 3.0 mm) (Dentis, Daegu, Korea) were prepared, 5 for each diameter. The sample was placed at 30 from the horizontal surface on the universal testing machine, and off-axis loading was applied until permanent deformation occurred and the load was taken as maximum compressive strength. The mean value of the 5 samples was calculated, and the compressive strength of implant fixture was compared according to diameter. In addition, we prepared 3 samples for each diameter, and applied loading equal to 80%, 60% and 40% of the compressive strength until fracture occurred. Then, we measured the cycle number on fracture and analyzed fatigue fracture for each diameter. Additionally, we measured the cycle number on fracture that occurred when a load of 43 N, which is the average masticatory force of complete denture, was applied. The difference on compressive strength between each group was tested statistically using one-way ANOVA test. Results: Compressive strength according to the diameter of mini implant was 101.5 ± 14.6 N, 149 ± 6.1 N and 276.0 ± 13.4 N, respectively, for diameters 2.0 mm, 2.5 mm and 3.0 mm. In the results of fatigue fracture test at 43 N, fracture did not occur until 2×106 cycles at diameter 2.0 mm, and until 5×106 cycles at 2.5 mm and 3.0 mm. Conclusion: Compressive strength increased significantly with increasing diameter of mini implant. In the results of fatigue fracture test conducted under the average masticatory force of complete denture, fracture did not occur at any of the three diameters. All of the three diameters are usable for supporting overdenture in maxillary and mandibular edentulous patients, but considering that the highest masticatory force of complete denture is 157 N, caution should be used in case diameter 2.0 mm or 2.5 mm is used. 연구 목적: 일체형의 o-ring type 미니 임플란트 고정체의 직경에 따른 파절강도의 차이를 비교하고자 한다. 연구 재료 및 방법: 길이 13 mm의 one body o-ring type의 미니 임플란트(Dentis, Daegu, Korea)를 직경2.0, 2.5, 3.0 mm 각각 5개씩 준비하였다. Instron universal testing machine 에 수직면에서 30도 각도로 샘플을 위치시키고 off-axis loading을 가하여 영구변형이 일어난 하중 값을 파절강도로 하고 5개의 시편의 평균을 구하여 각 직경에 따른 임플란트의 고정체의 파절강도를 비교하였다. 또한, 각 직경마다 3개의 시편을 준비하고 동적하중 피로 시험기를 이용하여, 파절이 발생할 때까지 파절강도의 80%, 60%, 40%의 loading 을 가하여 파절되는 cycle수를 측정하여 각 직경의 피로 파절을 분석하였다. 추가적으로 총의치의 평균 저작력인 43 N의 하중을 가하여 파절되는 cycle 수를 측정하였다. 각 군간의 차이를 검증하기 위해서 일원분산분석(one-way ANOVA test)을 시행하였고, 통계처리는 SPSS ver.12 (SPSS Inc. Chicago, IL, USA) 을 이용하여 실시하였다. 결과: 직경 3.0 mm 의 미니 임플란트는 평균 276.0 ± 13.4 N의 압축력을 받았을 때 영구 변형이 일어났고 직경 2.5 mm 미니 임플란트가 149.0 ± 6.1 N, 2.0 mm 미니 임플란트가 101.5 ± 14.6 N일 때 영구 변형이 일어났다. 각 군간의 파절강도에는 유의한 차이가 있었다(P<.001). 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세직경 모두 5×106 cycle까지 파절이 일어나지 않았다. 결론: 미니 임플란트의 정적 하중 하에서 최대 압축강도는 직경이 증가할수록 유의적으로 증가하였다. 최대 압축강도는 세 직경 모두 총의치의 평균 저작력 보다는 크나 최대 교합력보다는 직경 3.0 mm에서만 크게 나타났다. 총의치의 평균 저작력 하중에서 실시한 피로 파절 실험 결과, 세 직경 모두 파절이 일어나지 않았다.

학령전기 아동의 글씨 쓰기에 영향을 미치는 요인에 관한 연구

김원진,왕군철,김두리,최인영,허진아,최유정,장문영 대한감각통합치료학회 2011 대한감각통합치료학회지 Vol.9 No.1

목적 : 학령전기 아동의 글씨 쓰기 명료도 및 속도와 지각-운동 기술의 상관관계를 확인하고, 글씨 쓰기에 가장 영 향을 주는 요인을 알아보고자 하였다. 연구방법 : 덴버 발달 선별 검사를 통하여 정상 발달로 선별된 23명의 학령 전기 아동(평균 연령=68.61개월, SD=2.04)을 대상으로 글씨 쓰기 명료도 및 속도 측정을 위하여 한글 자모 쓰기 검사지를 사용하여 자음과 모음을 쓰도록 하였다. 시지각과 시각-운동 통합 수행 능력 측정을 위하여 시지각 발달 검사를 사용하였고, 소운동 협응 수행 능력 측정을 위하여 Grooved pegboard test를 사용하였다. 결과 : 글씨 쓰기 명료도와 전반적인 시지각, 비운동성 시지각, 시각-운동 통합, 우세손 소동작 협응의 상관관계는 없었으며, 글씨 쓰기의 속도는 전반적 시지각과 우세손 소동작 협응 항목에서 유의한 상관관계를 보였다. 회귀 분 석 결과 글씨 쓰기 속도에 가장 큰 영향을 주는 요인은 전반적 시지각 항목이었다. 결론 : 만 5~6세 학령 전기 아동의 전반적 시지각 능력의 발달을 향상시키기 위한 중재를 제공하는 것이 글씨 쓰기 의 속도 능력을 향상 시킬 수 있다는 것을 알 수 있다. Objective : This study investigated the relationships of handwriting legibility and perceptual-motor skills, and handwriting speed and perceptual-motor skills. And identified the predictors that most affect the handwriting of preschool children. Methods : Twenty-three typically developing preschool aged children (mean age: 68.61 months, SD=2.04) were selected through the Korean-Denver Developmental Screening Test-2(K-DDST-2). The children were tested with regard to handwriting legibility, visual perception, visual-motor integration and fine-motor coordination. Results : First, a significant relationship was not found among handwriting legibility, visual perception, visualmotor integration and fine-motor coordination. Second, a significant relationship was found among handwriting speed, visual perception and fine-motor coordination. Third, stepwise multiple regression analyses showed that general visual perception were significant predictors for handwriting speed. Conclusion : Occupational therapists should evaluate children's visual perception levels utilizing a standardized test, and focus on general visual perception in order to improve handwriting skill(speed). Also, occupational therapists are expected to play an important role in the management and treatment of children's handwriting skills.

Contour of lingual surface in lower complete denture formed by polished surface impression

Heo, Yu-Ri,Kim, Hee-Jung,Son, Mee-Kyoung,Chung, Chae-Heon The Korean Academy of Prosthodonitics 2016 The Journal of Advanced Prosthodontics Vol.8 No.6

PURPOSE. The aim of this study was to analyze the shapes of lingual polished surfaces in lower complete dentures formed by polished surface impressions and to provide reference data for use when manufacturing edentulous trays and lower complete dentures. MATERIALS AND METHODS. Twenty-six patients with mandibular edentulism were studied. After lower wax dentures were fabricated, wax was removed from the lingual side of the wax denture and a lingual polished surface impression was obtained with tissue conditioner. The definitive denture was scanned with a three-dimensional scanner, and scanned images were obtained. At the cross-sections of the lingual frenum, lateral incisors, first premolars, first molars, and anterior border of the retromolar pads, three points were marked and eight measurements were taken. The Kruskal-Wallis test and a post hoc analysis with the Mann-Whitney test were performed. RESULTS. Each patient showed similar values for the same areas on the left and right sides without a statistically significant difference. The height of the contour of the lingual polished surface at the lingual frenum was halfway between the occlusal plane and lingual border, it moved gradually in a downward direction. The angle from the occlusal plane to the height of the contour of the lingual polished surface was increased as it progressed from the lingual frenum towards the retromolar pads. CONCLUSION. The shape of the mandibular lingual polished surface was convex at the lingual frenum, lateral incisors and gradually flattened towards the first molars and retromolar pads.

Contour of lingual surface in lower complete denture formed by polished surface impression

Yu-Ri Heo,Hee-Jung Kim,Mee-Kyoung Son,Chae-Heon Chung 대한치과보철학회 2016 The Journal of Advanced Prosthodontics Vol.8 No.6

PURPOSE The aim of this study was to analyze the shapes of lingual polished surfaces in lower complete dentures formed by polished surface impressions and to provide reference data for use when manufacturing edentulous trays and lower complete dentures. MATERIALS AND METHODS Twenty-six patients with mandibular edentulism were studied. After lower wax dentures were fabricated, wax was removed from the lingual side of the wax denture and a lingual polished surface impression was obtained with tissue conditioner. The definitive denture was scanned with a three-dimensional scanner, and scanned images were obtained. At the cross-sections of the lingual frenum, lateral incisors, first premolars, first molars, and anterior border of the retromolar pads, three points were marked and eight measurements were taken. The Kruskal-Wallis test and a post hoc analysis with the Mann-Whitney test were performed. RESULTS Each patient showed similar values for the same areas on the left and right sides without a statistically significant difference. The height of the contour of the lingual polished surface at the lingual frenum was halfway between the occlusal plane and lingual border, it moved gradually in a downward direction. The angle from the occlusal plane to the height of the contour of the lingual polished surface was increased as it progressed from the lingual frenum towards the retromolar pads. CONCLUSION The shape of the mandibular lingual polished surface was convex at the lingual

가철성 국소의치 제작을 위한 인상채득

허유리(Yu-Ri Heo),손미경(Mee-Kyoung Son) 대한턱관절교합학회 2014 구강회복응용과학지 Vol.30 No.2

A Modified Method of Genomic DNA Extraction of Meloidogyne spp. (Tylenchida: Meloidogynidae) for Molecular Assay

Bo-Ram Kim,Bok-ri Park,Yu Jeong Shin,Noh Youl Heo,Jae-Yong Chun 한국응용곤충학회 2014 한국응용곤충학회 학술대회논문집 Vol.2014 No.10

Recently, researches of molecular biology for the identification of root-knot nematode (RKN) species have been reported in plant quarantine. In this study, applicable and reproducible method to extract high quality genomic DNA from single nematode (Meloidogyne spp.) was developed. Also, the modified method was verified by DNA manipulation techniques such as PCR amplification and cloning. Single juvenile was floated in a drop of water and digested with proteinase K for 24 h. After that, DNA was extracted by using distilled water as extraction buffer. PCR amplification was carried out with universal primers spanning the internal transcribed spacer (ITS) region to distinguish species. When using the existing DNA detection method, quantification results showed that 42.86% of the deposited DNA was extracted. Whereas the modified DNA extraction method was increased to 100%. When PCR products test the direct sequencing using the ITS rDNA primers, it was also identified as M. javanica, M. incognita, and M. hispanica. Based on the studies conducted, the application of this modified method would be useful and efficient on plant parasitic nematode molecular assay.

The protective effects of edible insect on Vancomycininduced acute renal injury in rats

Yu-Rim Park,Pu-reum Seok,Hye-Ri Kwon,Jin-Sun Heo,Hyo-Bin Lee,Hye-Joon Park,Ha-Eun Lee,Jae-Ho Shin 한국실험동물학회 2018 한국실험동물학회 학술발표대회 논문집 Vol.2018 No.1

Effect of a Probiotic Strain, Enterococcus faecium, on the Immune Responses of Olive Flounder (Paralichthys olivaceus)

( Yu Ri Kim ),( Eun Young Kim ),( Sun Young Choi ),( Muhammad Tofazzal Hossain ),( Ryun Kyoung Oh ),( Won Seok Heo ),( Jong Min Lee ),( Young Chai Cho ),( In Soo Kong ) 한국미생물 · 생명공학회 2012 Journal of microbiology and biotechnology Vol.22 No.4

The present study was aimed to investigate the effect of a probiotic, Enterococcus faecium, on the immune responses against infection with the marine fish pathogen Lactococcus garvieae in olive flounder (Paralichthys olivaceus). The immune responses were assessed by lysozyme activity, complement activity, protease activity, and expression of proinflammatory cytokines by RT-PCR. The lysozyme and complement activities were increased between 9 to 15 and 9 to 13 days, respectively, and antiprotease activity was slightly elevated after 5 days of probiotic treatment. The TNF-α and IL-1β expressions were observed from kidney and spleen. The results of this study reveal that E. faecium induces immune-responsible materials and protects olive flounder from lactococcosis.

A Study on the Regulation and Countermeasure of Sulfur Content in Marine Fuel Oil

Yang, Yu Ri,Kim, Seung Hyeon,Noh, Jeong Yun,Shin, Hyo Seob,Jo, Ha Neul,Heo, Sung Ho,Hong, Seok Cheon,Lim, Kyung Sun,Han, Won Heui 해양환경안전학회 2017 해양환경안전학회 학술발표대회 논문집 Vol.2017 No.11

Paeoniae radis alba mediated alleviation of atopic dermatitis like immune alterations in mice (II)

Yong Heo,Ji Youn Kim,Kyeong Uk Yeo,So Ryeon Hwang,ARam Kim,Ji Hyun Yu,Jae Hee Lee,Na Ri Seo,Ah Rang Jo,Ye Soul Jeon,So Jung Sin,Hyung Jun Kim,Byung Ki Song,Jong Suek Shin 한국실험동물학회 2012 한국실험동물학회 학술발표대회 논문집 Vol.2012 No.8