http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Park, S.U.,Ju, J.W.,Lee, I.H.,Joo, S.J. Pergamon Press ; Elsevier [distribution] 2016 Atmospheric environment Vol.140 No.-
<P>The optimal regression equations for the dust emission flux parameterized with the friction velocity (u*) only, the friction velocity with the threshold friction velocity (u(t)*) and the friction velocity together with the flux Richardson number (R-f) in the dust source region are derived using the sonic anemometer measured momentum and kinematic heat fluxes at 8 m height and the two-level (3 m and 15 m height) measured PM10 concentrations from a 20-m monitoring tower located at Naiman in the Asian dust source region in China for the period from March 2013 to November 2014. The analysis period is divided into three sub-periods based on the Normalized Difference Vegetation Index (NDVI) to eliminate the effect of vegetation on the dust emission flux. The dust event is identified as a peak half hourly mean dust concentration (PM10) at 3 m height exceeding the sub-period mean dust concentration plus one standard deviation of the sub-period. The total of 317 dust events is identified with the highest number of dust event of 18.8 times a month in summer. The optimal regression equations of the dust emission flux (F-c) for dust events parameterized with u* and R-f are found to simulate quite well the dust emission flux estimated by the observed data at the site for all periods especially for the unstable stratification, suggesting the potential usefulness of these equations parameterized by u* with R-f rather than those by u* only and u* together with u*(t) for the estimation of the dust emission flux in the Asian dust source region. (C) 2016 Elsevier Ltd. All rights reserved.</P>
저압 에어포그 노즐을 이용한 온실 냉방설계 프로그램 개발
남상운 ( S. W. Nam ),고기혁 ( G. H. Ko ),성인모 ( I. M. Sung ),서동욱 ( D. U. Seo ),김영식 ( Y. S. Kim ) 한국농공학회 2012 한국농공학회 학술대회초록집 Vol.2012 No.-
포그냉방 온실의 열평형식과 수분평형식을 이용하여 주어진 설계조건으로부터 에어포그 시스템의 분무수량과 필요환기량을 구할 수 있는 엑셀 프로그램을 개발하였다. 포그시스템의 열평형식은 일반 온실의 열평형식에 실내에 분무된물의 증발에 의한 잠열손실항을 추가하여 구성하였다. 설계조건은 목표온도, 목표습도, 외기온도, 외기습도, 일사량이고, 외기온도, 습도, 일사량은 지역의 과거 기상관측자료로부터 위험율별(TAC, Technical Advisory Committee, ASHRAE 방식) 설계자료를 사용하였다. 온실조건은 바닥면적, 피복면적, 부피, 차광율, 연동수이고, 특성값은 피복재의 광투과율, 열관류율, 작물의 증발산계수, 노즐의 분무수량을 입력하고, 공기의 비열, 비체적, 증발잠열, 수증기압, 습도비, 매개변수 등은 습공기의 특성식을 이용하여 계산한다. 이와 같은 자료를 입력하여 프로그램을 실행하면 목표 실내온도별 분무수량과 필요환기율이 계산되고 원하는 설계값이 출력된다. 자연환기 온실에서는 필요환기율을 만족시킬수 없으므로 실현 가능한 환기율로부터 목표온도를 수정하고 그 때의 분무수량을 설계값으로 취한다. 이를 위해 환기율과 분무수량 및 온도와의 관계를 나타내는 VST(Ventilation, Spray and Temperature)차트를 생성하도록 프로그램을 구성하였다. 프로그램의 사용방법은 다음과 같다. 먼저 입력자료 중 온실조건, 설계조건, DataBase에 해당되는 값을 입력한다. 다음으로 출력값의 목표온도에 해당하는 필요환기율을 검토한다. 자연환기 온실의 가능한 환기율은 측창만 설치된 단동온실에서 분당 0.2~0.6회, 측창과 천창을 설치한 단동 온실은 0.7~0.8회, 연동온실은 0.8~1.1회 정도이다. VST 차트를 이용하여 실현 가능한 환기율로부터 목표온도를 수정한다. 환기율을 증대시킬 수 있다면 목표온도를 더 낮게 잡아도 된다. 수정된 목표온도로부터 필요한 분무수량을 구한다. 개발한 포그냉방 설계프로그램으로부터 목표온도와 습도, 위험율별설계용 외부기상데이터(TAC 1%, 2.5%, 5%)에 따라 필요한 환기율과 분무수량 등의 기본정보를 제공할 수 있는 에어포그 설치 가이드라인을 작성하였다. 포그냉방 설계 기본정보로부터 필요한 노즐의 수와 노즐 설치간격을 구할 수 있는 이론식을 구성하고, 사례조사 및 이론분석을 통하여 노즐의 설치높이를 설정하였으며, 에어포그 노즐의 설치기준을 작성하였다.