http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
광합성 세균을 포함한 고정화 복합미생물에 의한 질소성분 제거
조경숙,김정보,정수경,정해윤,조정섭,김중균,Cho, Kyoung Sook,Kim, Jeong Bo,Jeong, Soo Kyoung,Jeong, Hae Yoon,Cho, Jeong Sub,Kim, Joong Kyun 한국해양바이오학회 2006 한국해양바이오학회지 Vol.1 No.2
순환여과식 양어 생산시스템에 있어 발생되는 폐수의 효율적 처리를 위하여, 유독 질소성분 처리능력이 뛰어난 광합성세균(PSB)을 PVA에 고정화한 beads 또는 CTA에 고정화한 cubes와 $NH{_4}^+$를 잘 이용하는 균(AUB)을 고정화한 beads를 여러 비율로 혼합한 고정화 혼합균에 의한 N 제거 특성을 알아보았다. AUB 최적 배지에서의 반응결과를 보면, 최대 가스 생성율은 PSB:AUB beads의 비율이 10:40 일 때, 0.87ml/h로 가장 높았고, 전체 beads 중 AUB beads의 혼합비율이 높을수록 가스 생성율이 높아짐을 알 수 있었다. PSB:AUB beads의 혼합비율이 50:0, 40:10, 25:25 및 10:40 일 때 pH값은 6.29, 6.01, 5.69 및 5.13으로 나타났다. 이에 반해 미량의 $NH{_4}^+$를 포함하는 PSB 최적배지에서의 반응결과를 보면, 전체 beads 중 AUB가 차지하는 비율이 높을수록 가스 생성양 및 가스 생성율은 현저하게 낮게 나타났다. 이때, pH값은 두 균주의 혼합 비율에 관계없이 약 6.5로 일정하게 나타났다. PSB cubes와 AUB beads를 여러 비율로 섞어 실험한 결과는 PSB beads와 AUB beads를 섞어 반응시킨 결과와 같은 경향을 보였으나 가스의 생성량 및 생성속도가 현저하게 감소하였고, control 반응에서도 가스 생성량이 0.2ml로 매우 적은 양이 발생하였다. 이상의 결과로 보아, $NH{_4}^+$, $NO{_2}^-$ 및 $NO{_3}^-$ 성분이 들어있는 실제 양식폐수의 수질정화에 있어서 PSB:AUB beads를 10:40으로 혼합한 고정화 균주를 이용할 경우 폐수내 N 성분의 동시 제거에 효과적일 것으로 보인다. For efficient removal of nitrogenous compounds produced in recirculating aquaculture system, the N removal characteristics of immobilized mixed microorganisms were investigated at various mixing ratios of photosynthetic bacteria (PSB) immobilized in PVA beads or CTA cubes and ammonium utilizing bacteria (AUB) immobilized in PVA beads. On the optimal medium of AUB, the maxium gas production rate was obtained at the mixing ratio of 10:40 (PSB:AUB), and the gas production rate increased as the portion of AUB beads in the mixed beads increased. When the mixing ratios of PSB:AUB beads were 50:0, 40:10, 25:25 and 10:40, the final pHs were measured to be 6.29, 6.01, 5.69 and 5.13, respectively. On the optimal medium of PSB, however, the volume and the rate of gas production decreased remarkably as the portion of AUB beads in the mixed beads increased. The final pH was measured to be approximately 6.5, regardless of the mixing ratio. In the reactions by the mixed culture of PSB cubes and AUB beads, all results showed the same tendency of those by the mixed culture of PSB and AUB beads, but the volume and the rate of gas production decreased remarkably, even with 0.2ml of gas production in control. From all the results, the use of mixed PSB and AUB beads at the ratio of 10:40 seems to be efficient to remove nitrogenous compounds in wastewater from recirculating aquaculture system.
전도성고분자-CNT 복합체를 활성물질로 사용한 빛을 일에너지로 바꾸는 동력장치 제작에 관한 연구
김세진 ( Sae Jin Kim ),김정보 ( Jeong Bo Kim ),박준호 ( Joon Ho Park ),임연주 ( Youn Joo Lim ),홍남정 ( Nam Jeong Hong ),정규관 ( Kyu Kwan Zong ) 전북대학교 과학교육연구소 2014 科學敎育論叢 Vol.39 No.1
본 연구에서는 CNT에 polypyrrole을 코팅시켜 새로운 흡광체를 제조하고 이를 PDMS를 기반으로 한 추진체의 후면에 부착시켜 추진체를 제작하였다. 제작된 추진체를 물위에 띄워 놓고 집광된 빛을 추진체 흐면의 활성물질에 투사하여 물과 추진체 사이에 표면장력 차이를 유발하여 추진체가 운동하는 것을 확인하였다. SEM을 이용하여 제조한 추진 활성 물질의 나노구조가 확인되었다. 이 연구에서 추진의 모양, 추진체의 크기, 추진체의 종류, 발수제의 첨가 유무에 따라 추진체의 운동 속도가 비교 실험 되었다 추진체는 배 모양의 유선형, 크기는 소형, 추진체의 종류에서는 CNT+PPY의 복합소재, 그리고 반수제가 첨가된 것이 각각 추진 속도가 더 빠른 것으로 확인되었다. 향후 흡광제의 개량을 통해 더욱 에너지 효율이 뛰여난 물질이 개발되고 물질의 안정성과 효율, 그리고 추진체의 방향조절이 최적화된다면 현실에 적용되어 신재생 에너지의 한축을 이룰 수 있다는 가능성이 제기되었다. In this study, new light dbsorbing CNT-polyprrole composites was synthesized by coating CNT with polypyrrole and driving devides was constructed by attaching the composites on the back side of PDMS based shuttle, The model shuttle was floated on the water and the concentrated light by a focusing lcns was irradiated on the surface of the composite of the shuttle which brought surface tension mediated conversion of light to work. The nano structure od the composites used as an active material was characterzed by SEM, Drving speeds the model shuttle were compared according to its shape size and content of superhydrophobic material. The model shuttle equipped with fish-shape, small size, and CNT-polyprrole composite Was found to move the fastest among them. Development of more energy-efficient light absorbing composite and control of steering the direction of the shuttle are needed for further improvement of thc mocel shuttle.
BTA 드릴을 이용한 대형선박 연료공급관 가공에 관한 연구
한민식(Han Min-Sik),박대균(Park Dae-Kyun),박정보(Park Jeong-bo),김순경(Kim Soon-Kyung),전언찬(Jeon Eon-Chan) (사)한국CDE학회 2010 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2010 No.1
When deep hole drilling with BTA drill, there are serious problems such as accuracy of diameter, surface roughness to inhibit the required qualities. With the purpose of the accuracy improvement in deep hole drilling, we investigated the influence of the drilled hole accuracy and the cutting resistance of materials that occurred as the variation of the cutting condition after deep hole drilling with BTA drill on fuel oil supply pipe for large ship.
UHF대역 RFID 리더기용 광대역 마이크로스트립 안테나 설계
김정보,양진모 대구대학교 2006 대구대학교 학술논문집 Vol.1 No.2
일반적인 마이크로스트립 안테나는 높은 Q값으로 인해 5% 이내의 대역폭을 가지고 있다. 이는 단일 밴드(국내908.5~914MHz)에서는 문제가 없지만 UHF대역의 다중밴드 RFID 어플리케이션에 사용하기에는 부족하다. 본 논문에서는 마이크로스트립 안테나가 지니는 협대역의 특성을 개선하기 위해 부싱(busing)을 사용하여 RFID 리더기에서 요구되는 광대역 원편파를 발생하는 마이크로스트립 안테나를 설계하였다. 원편파 특성을 얻기 위하여 패치의 모서리를 절단하였으며 패치면에 슬릿을 삽입하여 광대역의 축비를 얻었다. Standard microstrip antennas have bandwidth of less than 5% because of high Q of microstrip antennas. 5% bandwidth is far less than needed in order to be used in UHF band RFID applications. In this paper, a bushing is used to improve narrow-band characteristics of circular-polarized microstrip antennas for multi-band RFID reader. Circular polarization with wide-band axial ratio was obtained by cutting the corners and inserting slits to the patch.일반적인 마이크로스트립 안테나는 높은 Q값으로 인해 5% 이내의 대역폭을 가지고 있다. 이는 단일 밴드(국내908.5~914MHz)에서는 문제가 없지만 UHF대역의 다중밴드 RFID 어플리케이션에 사용하기에는 부족하다. 본 논문에서는 마이크로스트립 안테나가 지니는 협대역의 특성을 개선하기 위해 부싱(busing)을 사용하여 RFID 리더기에서 요구되는 광대역 원편파를 발생하는 마이크로스트립 안테나를 설계하였다. 원편파 특성을 얻기 위하여 패치의 모서리를 절단하였으며 패치면에 슬릿을 삽입하여 광대역의 축비를 얻었다.
RF-MOSFET의 개선된 BSIM3 소신호 모델과 측정기반 파라미터 추출
심용석,김정보,양진모 대구대학교 정보통신연구소 2004 情報通信硏究 Vol.3 No.1
RF 영역에서 동작하는 초미세 MOSFET를 위한 새로운 소신호 모델과 파라미터 추출방법을 제안하였다. 이 모델은 BSIM3v3 코어에 기판 회로망 모델과 기생소자들이 추가된 매크로 모델로 구현되었다. 모델 파라미터들은 공통-소오스로 구성된 다양한 크기와 바이어스 조건하에서 nMOS 트랜지스터의 측정된 S-파라미터로부터 직접 추출되었다. 직접 파라미터 추출은 활성영역에서 동작하는 등가회로에서 Z와 Y 파라미터를 이용하여 임베이딩 기법으로 이루어 졌다. 0.5 GHz에서 20 GHz 범위까지 측정된 S-파라미터와 소신호 모델의 시뮬레이션 결과는 우수하게 일치하였다. A new small-signal model for deep submicrometre MOSFET for radio frequency operation and its parameter extraction method are proposed. The model is implemented as macromodel with substrate network model and parasitic elements added to the BSIM3v3 core. Model parameters are directly extracted from S-parameter data measured from common-source structured and various sized and biased MOS transistors . Direct parameter extraction is performed by embedding technique using Z and Y parameter analysis on the equivalent circuit in the saturation region of operation. Excellent agreement between the simulation results of the small-signal model and measured S-parameters at virious-sized MOS transistor in the range from 0.5 GHz to 20 GHz has been obtained.