http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임의의 분배비를 갖는 새로운 이중 대역 가지 선로 결합기
김귀수(Kwisoo Kim),권칠현(Chilhyeun Gwon),Baatarkhuu Dorjsuren,임종식(Jongsik Lim),안달(Dal Ahn) 한국전자파학회 2009 한국전자파학회논문지 Vol.20 No.5
본 논문에서는 두 개의 대역에서 서로 다른 임의의 분배비를 갖는 이중 대역 가지 선로 결합기를 제안한다. 가지 선로 결합기의 선로들을 π-형 등가회로로 변환할 때 이 등가회로가 임의의 두 주파수에서 서로 다른 임피던스 특성을 갖고 두 주파수에 대하여 선로의 전기적 길이는 중심 주파수의 λ/4가 되도록 설계한다. 제안된 설계법의 타당성을 입증하기 위해서 0.9 ㎓와 2 ㎓에서 서로 다른 분배비를 갖는 결합기를 설계하였다. 분배비가 두 주파수에서 각각 1:1과 1:3이 되는 결합기를 설계, 제작 및 측정하였다. 측정 결과, 중심 주파수에서 삽입 손실은 0.33 ㏈ 이내의 오차 범위를 보였고, 반사 손실과 격리 특성은 -18.07 ㏈ 이상으로 매우 우수한 특성을 보였다. This paper presents the design of a dual band branch line hybrid coupler(BLHC) with different power division ratios at two bands. In the proposed design, transmission lines of the BLHC are transformed to π-type equivalent circuits which represent different impedances and λ/4 electrical length at two frequency bands. In order to verify the proposed method, a dual band coupler with different power division ratios is designed for 0.9 ㎓ and 2 ㎓ applications. The desired power division ratios are 1:1 and 1:3 at the two operating frequency bands. The measured results show excellent performance with an insertion loss of less than 0.33 ㏈, a return loss of less than -18.07 ㏈, and good isolation characteristics.
최영수(Choi, Young-Soo),유상태(Yu, Sang-Tai),박선주(Park, Sun-Ju),Baatarkhuu Dorjsuren,임종식(Lim, Jong-Sik),안달(Ahn Dal) 한국산학기술학회 2010 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 4×4 버틀러 매트릭스에 대하여 연구 및 고찰 한다. 셀룰러 대역의 주파수인 824∼894MHz대역에서 신호를 균등하게 통과시키고, 위상의 차이를 균일하게 분배시키는 회로로 구현 되었다. 기존의 버틀러 매트릭스는 단층 기판 구조로 구현 되었지만, 본 연구는 다층 기판구조로 설계하여 크기가 보다 더 축소되었다. 마이크로스트립 구조인 90° 하이브리드 커플러 대신에 크기를 보다 더 효율적으로 줄이기 위하여 LTCC 커플러를 사용한다. 4×4 버틀러 매트릭스의 설계는 Ansoft사의 Designer V3.5와 HFSS V11을 사용한다. 그리고 시뮬레이션 한 후 실제 제작한 버틀러 매트릭스를 측정하여 비교한 결과 매우 우수한 특성을 얻었다. 4×4 Butler Matrix structure has been presented in this paper. It can passes the signal with equal power level and phase difference in the 824MHz to 894MHz frequency of the cellular band. Conventional Butler Matrix was implemented as a single layer substrate structure, but in this paper, we use multi-layer substrate structure and eventually we could get it reduced in size than others. We also used the LTCC coupler to reduce the size effectively, instead of using 90° hybrid coupler composed of microstrip structure. we used Designer V3.5 Ansoft HFSS V11 for design of 4×4 Butler matrix. Finally, we get good agreements between simulation and experimental results.
수직 대칭 마이크로스트립 결합선로의 특성 파라미터 추출방법에 관한 연구
유상태(Sang-Tai Yu),최영수(Young-Soo Choi),박선주(Sun-Ju Park),Baatarkhuu Dorjsuren,김현태(Hyun-Tai Kim),한상민(Sang-Min Han),임종식(Jong-Sik Lim),안달(Dal Ahn) 한국정보기술학회 2011 한국정보기술학회논문지 Vol.9 No.7
In this paper, A new extraction method of the characteristic parameters of a vertical symmetric coupled transmission line is suggested. We extract characteristic parameters using results of S-parameter for coupled line by simulation. To verify the accuracy of this extraction method, a vertical symmetric coupled line coupler that has -20㏈ coupling at the center frequency 1.8㎓ is used. The extraction method of the characteristic parameters shows the excellent accuracy by comparing the results of EM simulation to the extracted characteristic parameters.
전송선로와 인덕터를 이용한 평판형 디스크 공진기의 등가회로
유상태(Sang-Tai Yu),최영수(Young-Soo Choi),박선주(Sun-Ju Park),Tharoeun Thap,Baatarkhuu Dorjsuren,한상민(Sang-Min Han),임종식(Jong-Sik Lim),안달(Dal Ahn) 한국정보기술학회 2011 Proceedings of KIIT Conference Vol.2011 No.5
본 논문에서는 평판형 디스크 공진기의 등가회로를 전송선로와 인덕터를 이용하여 구현하였다. EM 시뮬레이션을 통하여 반지름이 25㎜인 디스크 공진기의 S-parameter 결과를 얻고 이와 동일한 S-parameter를 갖는 구조를 마이크로스트립라인과 인덕터를 이용하여 구현하였다. 평판형 디스크 공진기의 EM 시뮬레이션 결과와 등가회로의 circuit 시뮬레이션의 결과가 일치함을 보임으로써 디스크 공진기의 등가회로의 타당함을 보였다. In this paper, a equivalent circuit of planar disk resonator is realized using transmission lines and inductors. A S-parameter result of planar disk resonator with radius 25㎜ is obtained, and the equivalent circuit for the planar disk resonator realizes using transmission lines and inductors. The equivalent circuit shows excellent accuracy by comparing the EM simulation result of planar disk resonator to circuit simulation result of equivalent circuit.