http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
다중 선형 시불변 모델에 대한 다목적 $H_2/H_{\infty}$ 제어기 설계
조도현,원영진,이종용,Cho, Do-Hyeoun,Won, Young-Jin,Lee, Jong-Yong 대한전자공학회 2005 電子工學會論文誌 IE (Industry electronics) Vol.42 No.3
본 논문은 안정화 조절기와 추종 성능을 확보하기 위하여 폴리도프 모델를 갖는 도립진자 시스템의 다목적 $H_2/H_{\infty}$ 제어기를 설계를 나타낸다. 꼭지점 기법을 갖는 LMI 설계 기법에 의하여 폴리토프 모델에 대한 다목적 제어기를 설계한다. 각 폴리포프 모델에 대하여 설계된 제어기에 의해 제어된 도립진자를 경사각의 초기값에 대한 수직 각을 안정하게 연직 위치로 복원시키는 곳을 관찰한다. This paper presents a design of a multi-objective $H_2/H_{\infty}$ controller of an inverted pendulum with polytopic model by the stabilizing regulator and tracking performances. Multi-objective controllers are designed for polytopic models by the LMI design technique with convex algorithms. It is observed that the inverted pendulum controlled by any controller designed for each polytopic model is stably restored to the vertical angle position for initial values of larger tilt angles.
조도현(Do-Hyeoun Cho),이철(Chul Lee),최진택(Jin-Tek Choi),김진수(Jin-Soo Kim),이상훈(Sang-Hun Lee),이종용(Jong-Yong Lee) 대한전자공학회 2009 電子工學會論文誌 IE (Industry electronics) Vol.46 No.2
센서 네트워크(Sensor Networks)에 대해 LEACH, EACHS, HEED의 방법을 비교 분석하고, HEED의 단점인 클러스터 헤드 수를 보장하는 것과 DEAD 노드를 최소화 하여 클러스터 헤드 선출 에너지 효율성을 개선하는 방법을 제안 하였다. 제안된 결과의 성능을 MATLAB 시뮬레이션에 의해 비교 하였다. This study speak abut demerit of LEACH, EACHS, and HEED. There are demerits that LEACH, EACHS shall be rest energy of all nodes and HEED can't guarantee the number of cluster head. Proposed energy efficiency of selected cluster head guarantees the number of cluster head which is a demerit of HEED and minimizes the node of DEAD. Energy efficiency of simulation is compared by MATLAB.
조도현(Do-hyeoun Cho) 대한전자공학회 2014 전자공학회논문지 Vol.51 No.10
본 논문은 수/배전반에 대한 오류 및 전기 화재를 일으키는 부분 방전을 측정하기 위한 두 가지 형태의 센서 모듈 설계하고 이들의 성능을 평가한다. 설계한 센서 모듈을 이용하여 상전류의 관계와 부분 방전 및 과열을 분석한다. 수/배전반의 고장이나 전기화재를 방지하기 위하여 정보를 분석 및 이용을 이용하여 안정성 지수를 활용하는 방법을 제안한다. In this paper, we design two types of the sensor module to measure the partial discharge causing failures and electric fires for power incoming/distributer. And evaluate the performance thereof. Analyze the correlation of the phase current and the partial discharge and overheating. Proposes to apply the stability index by utilizing the analyzed information and use in order to prevent the failure or electrical fire of the power incoming/distributer.
조도현(Do-Hyeoun Cho),원영진(Young-Jin Won),이종용(Jong-Young Lee),송태인(Tae-In Song) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.11
LED’s production does Die bonding and Wire bonding on L/F board, and do epoxy dispensing to protect LED Chip and improve brightness. In this paper, we propose and realize a mechanism detecting automatically eopxy’s amount being filled, control data of pressure and time by the Quantity automatic revision, and epoxy of the schedule amount dispensing.
불확실성을 갖는 선형 시변 시스템의 선형 시불변 시스템 변환을 위한 불확실성 유계 해석
조도현(Do-Hyeoun Cho),이종용(Jong-Yong Lee) 대한전자공학회 2007 電子工學會論文誌 IE (Industry electronics) Vol.44 No.4IE
본 논문에서는 일반적으로 시변 선형 시스템에 존재하는 불확실성에 대한 해석을 위하여 입력-상태 변환을 고려하였다. 이는 불확실성에 대한 유계 범위를 결정하는데 중요한 역할을 한다. 그러므로 불확실성을 갖는 선형 시변 시스템에 대한 입력-상태 변환을 적용하여 선형 시불변 시스템으로 변환될 수 있는 불확실성의 유계 범위에 대하여 논의하였으며, 입력-상태변환을 위한 필요충분조건을 제시하였다. 변환된 시스템은 다중 적분기를 갖는 시스템으로 표현되며, 예제를 통하여 제안된 알고리즘을 확인하고, 검토하였다. In this paper, we consider the input-state(I/S) transformation for the time-varying linear system with the uncertainty because of to determine the bounded range of the uncertainty. And we get the time-invarying linear system after the I/S transformation. We present the necessary sufficient condition for the I/S transformation.The transformed system represent the system with the multiple integral. We verify the proposal algorithm via the example and examine.
조도현(Do Hyeoun Cho) 대한전자공학회 2011 電子工學會論文誌 IE (Industry electronics) Vol.48 No.2
본 논문은 LCD등에 사용되는 유리기판 가공 과정에서 표면에 발생하는 이물질을 제거하기 위한 세정 시스템을 제안한다. 이 세정 공정 시스템은 알카리 전해수의 화학적 세정과 과열 수증기 시스템의 물리적 세정방법을 사용한 세정, 린스, 건조 공정으로 구성된다. 또한 세정 시스템에서 사용되는 알카리 전해수의 화학적 세정효과를 실험을 통해, 알카리 전해수의 세정 효과와 과열 수증기 시스템의 제거효과를 보인다. In this paper, we propose the cleaning process system to remove micro-particles, various impurities, unnecessary residues, etc. for liquid crystal display manufacturing processes. This system is structured with cleaning, rinse and drying process using the chemical cleaning of alkaline water and the physical cleaning of SHS(supper heating steam). And we shows cleaning effects of alkaline water and remove effects of SHS.
휴대용 유무선 충전 배터리의 안테나 성능개선과 전자기 간섭 개선 기술
조도현(Cho Do-Hyeoun) 대한전자공학회 2019 전자공학회논문지 Vol.56 No.2
무선충전 기능이 있는 스마트 기기에 무선으로 전력을 전송하여 급속 충전시킬 수 있는 충전형 보조 배터리 장치를 설계하고 제작하였다. 이를 위하여 자기유도 방식 안테나의 임피던스 정합과 고효율 송수신 가능한 회로모듈 설계가 안테나 일체형 모듈에 적용되어 휴대용에 적합하게 소형화 하였다. 또한 전송 효율 최적화를 위한 최대 전력치 및 전력량 검출 기술 적용하여 휴대가 편리한 구조와 디자인을 고려한 구조 설계 하였다. We designed and manufactured a rechargeable battery charger that can be charged quickly by sending power wirelessly to smart devices with wireless charging capability. For this purpose, the impedance matching of the magnetic induction type antenna and the design of the circuit module capable of highly efficient transmission and reception are applied to the integrated antenna module, which makes it compact for portable use. Also, the maximum power value and power detection technique for transmission efficiency optimization were applied to design the structure considering the convenient structure and design.
조도현(Do-Hyeoun Cho),이종용(Jong-Yong Lee) 대한전자공학회 2008 電子工學會論文誌 IE (Industry electronics) Vol.45 No.4
LED의 생산은 L/F기판 위에 Die본딩과 Wire본딩을 한다. 그리고 LED Chip을 보호하고 휘도를 개선시키기 위하여 epoxy를 dispensing한다. 이 논문에서 실린지 속에 담겨 있는 eopxy의 양을 자동 검출하여, 그 양에 따른 압력과 시간의 data를 자동 보정 제어하고, 일정량의 epoxy가 토출되는 X-Y-Z축의 반복정밀도 보정용 기구물의 설계를 통하여 토출량을 일정하게 제어하고 불량율을 감소시켜 생산성을 높인다. LED's production does Die bonding and Wire bonding on L/F board, and do epoxy dispensing to protect LED Chip and improve brightness. In this paper, we propose and realize a x-y-z axis robot mechanism detecting automatically eopxy's amount being filled, control data of pressure and time by the quantity automatic revision, and epoxy of the schedule amount dispensing.