http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 이진형(Lee, Jin Hyung) (검색결과 433 건)
- 무료
- 기관 내 무료
- 유료
-
-
이진형,최순옥,박우현,Lee, Jin-Hyung,Choi, Soon-Ok,Park, Woo-Hyun 대한소아외과학회 2006 소아외과 Vol.12 No.2
Abdominal cystic lymphangiomas arising from the mesentery, omentum and retroperitoneum are rare and occasionally confused with other cause of acute abdomen. Sixteen children who underwent surgery for abdominal cystic lymphangioma between 1984 and 2005 at the Division of Pediatric Surgery, Keimyung University Dongsan Medical Center were evaluated retrospectively. There were 9 boys and 7 girls. Age ranged from 12 days to 13 years (mean age: 4.7years). The cysts were located in the omentum (4 cases),mesentery (9 cases: jejunum: 3, colon: 6). retroperitoneum (2 cases) and pelvic cavity (one case). The cyst content was hemorrhagic (8 cases), serous (5 cases), and inflammatory (2 cases), and chyle (one). Prenatal diagnosis was made in 3. The clinical features were variable, but abdominal pain, mass, and abdominal distention in order. There were 3 emergency operations in patients with complicated cyst, who were suspected of having panperitonitis and volvulus preoperatively. Complete excision was accomplished in all cases. There was one mortalityin a newborn with E.coli sepsis. Intestinal obstruction developed in 2 cases in long-term follow-up. No recurrence was observed. Although intraabdominal lymphangioma arising from mesentery, omentum and retroperitoneum are rare, it should be considered as a possible cause of acute abdomen.
-
고로슬래그 골재를 사용한 다공성 콘크리트의 물리·역학적 특성에 미치는 고로슬래그 미분말, 황토 및 보강섬유의 효과
이진형,박찬기,Lee, Jin-Hyung,Park, Chan-Gi 한국농공학회 2010 한국농공학회논문집 Vol.52 No.5
The effects of blast furnace slag, hwang-toh, and reinforcing fiber on the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates have been evaluated in this study. The effect of the depending on replacement ratio of blast furnace slag to cement was investigated such that the replacement ratio was varied to 0 %, 25 % and 50 %. Also, the replacement ratios of hwang-toh were 0, 20 and 30 %. The polyvinyl alcohol fiber was used for the reinforcing fiber. A series of pH, unit mass, and void ratio tests have been performed to study the physical properties of the porous concrete using blast furnace slag coarse aggregates with the polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh, while a series of compressive tests have been performed to evaluate the strength property depending on polyvinyl alcohol fiber and the replacement ratios of blast furnace slag, hwang-toh. The test results indicated that the physical and mechanical properties of porous concrete using blast furnace slag coarse aggregates is affected by the replacement ratio of blast furnace slag, and the fiber contents. According to the tests with polyvinyl alcohol fiber contents, the void ratio was decreased and the compressive strength was upgraded.
-
-
-
-
산란 입자를 포함하는 염료감응 태양전지용 $TiO_2$ 전극 제조
이진형,이태근,김철진,Lee, Jin-Hyoung,Lee, Tae-Kun,Kim, Cheol-Jin 한국마이크로전자및패키징학회 2011 마이크로전자 및 패키징학회지 Vol.18 No.2
The energy conversion efficiency of DSSCs (Dye-Sensitized Solar Cells) is dependent on the powder size, the structure, and the morphology of $TiO_2$ electrode. The higher efficiency is obtained with high surface area of the nanoanatase-$TiO_2$ powder adsorbed onto a lot more of the dye. Also, the enhancement of light scattering increases the efficiency with high adsorption of the dye. Powder size, crystalline phase, and shape of $TiO_2$ obtained by hydrothermal method have 15-20 nm, anatase and round. $TiO_2$ electrode has fabricated with the mixture of scattering $TiO_2$ particle with 0.4 ${\mu}m$ in nano-sized powder. Conversion efficiency of series of DSSCs was measured with volume fraction of scattering particle. Photovoltaic characteristics of DSSCs with 10% scattering particles are 3.51 mA for Jsc (short circuit current), 0.79 V for Voc(open circuit potential), filling factor 0.619 and 6.86% for efficiency. Jsc was improved by 11% and enhancement of efficiency by 0.77% compared with that of no scattering particles. The confinement of inserted light by light scattering particles has more increase of the injection of exiton(electron-hole pair) and decrease of moving path in electron. Efficiencies of DSSCs with more than 10% for scattering particles have reduced with increasing the pore in the $TiO_2$ electrode. 염료 감응 태양 전지(Dye-Sensitized Solar Cells: DSSCs)의 에너지 변환효율은 $TiO_2$ 전극의 입자 크기, 구조 및 표면 형태에 의존한다. 높은 비표면적을 갖는 나노 크기의 아나타제 $TiO_2$는 많은 염료를 흡착할 수 있어 변환효율을 증가 시킨다. 또한 전극 내부에서 태양광의 산란을 증가 시키면, 염료가 태양광을 흡수하는 양이 증가하여 효율이 증가할 수 있다. 수열 합성법으로 합성한 $TiO_2$ 분말의 크기는 15-25 nm이고, 결정상은 구형의 anatase 상이다. 0.4 ${\mu}m$의 $TiO_2$ 산란입자를 합성한 나노 크기의 $TiO_2$ 분말에 혼합하여 전극을 제조하고, DSSCs를 제작한 후 변환효율을 측정하였다. 10% 의 산란 입자가 포함된 DSSCs는 단락전류 3.51 mA, 개방전압 0.79 V, 곡선인자 0.619로 6.86%의 변환 효율을 나타 내었다. 산란 입자의 영향으로 단락전류밀도는 11% 증가하였고, 효율은 0.77% 증가하였다. 산란 입자가 포함되지 않은 DSSCs 보다 산란 입자가 전극으로 들어온 태양광을 산란시켜 전자-홀 쌍의 생성을 증가 시키고, 전자가 전극을 따라 이동하는 경로가 감소하여 효율이 증가하였다. 10% 이상의 산란 입자는 전극 내부에 입자 크기의 큰 기공을 증가 시켜 효율이 감소하였다.
-
졸-침투와 감광성 직접-패턴 기술을 이용하여 스크린인쇄된 Pb(Zr,Ti)O<sub>3</sub> 후막의 하이브리드 제작
이진형,김태송,박형호,Lee, J.-H.,Kim, T.S.,Park, H.-H. 한국마이크로전자및패키징학회 2015 마이크로전자 및 패키징학회지 Vol.22 No.4
본 논문에서는 졸-침투와 직접-패턴 공정을 이용하여 향상된 압전 후막의 전기적 특성과 우수한 패터닝 특성을 동시에 만족할 수 있는 제작 방법을 제시한다. 저온(< $850^{\circ}C$) 공정 후 후막의 고밀도 및 직접-패턴의 목적을 달성하기 위해서, 감광성 티탄산 지르콘산 연 ($Pb(Zr,Ti)O_3$, PZT) 졸을 스크린인쇄된 PZT 후막 내부로 침투시켰다. 직접-패턴된 PZT막은 포토크롬마스크와 UV 조사에 의해서 일정한 간격으로 인쇄된 후막 위에 성공적으로 형성되었다. 스크린인쇄된 후막은 분말형태의 기공성 구조를 갖고 있어 조사된 UV빛이 산란되기 때문에, 감광성 졸-침투 공정을 할 때 PZT 후막의 특성을 증가시키기 위한 공정의 최적화가 필요하다. 침투된 감광성 PZT 졸의 농도, 조사된 UV 시간 및 용매 현상 시간을 최적화한 결과, 0.35 M의 PZT 농도, 4 분의 UV 조사시간과 15 초의 용매 현상시간으로 졸-침투된 PZT 후막은 $800^{\circ}C$ 소결 온도에서 입자들의 성장에 의해 치밀화 정도가 증가되었다. 또한 PZT후막의 강유전 특성(잔류분극 및 항복 전압)도 향상되었다. 특히 잔류분극값은 스크린인쇄된 후막보다 약 4배정도 증가되었다. 이렇게 제작된 후막은 어레이타입의 압전형 마이크로미터크기의 센서 및 액츄에이터 등에 응용 가능성을 제시할 수 있었다. In this paper, we propose a fabrication technique for enhanced electrical properties of piezoelectric thick films with excellent patterning property using sol-infiltration and a direct-patterning process. To achieve the needs of high-density and direct-patterning at a low sintering temperature (< $850^{\circ}C$), a photosensitive lead zirconate titanate (PZT) solution was infiltrated into a screen-printed thick film. The direct-patterned PZT films were clearly formed on a locally screen-printed thick film, using a photomask and UV light. Because UV light is scattered in the screen-printed thick film of a porous powder-based structure, there are needs to optimize the photosensitive PZT sol infiltration process for obtaining the enhanced properties of PZT thick film. By optimizing the concentration of the photosensitive PZT sol, UV irradiation time, and solvent developing time, the hybrid films prepared with 0.35 M of PZT sol, 4 min of UV irradiation and 15 sec solvent developing time, showed a very dense with a large grain size at a low sintering temperature of $800^{\circ}C$. It also illustrated enhanced electrical properties (remnant polarization, $P_r$, and coercive field, $E_c$). The $P_r$ value was over four times higher than those of the screen-printed films. These films integrated on silicon wafer substrate could give a potential of applications in micro-sensors and -actuators.
-
-
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
