http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Melt - blown 방식에 의한 Polypropylene ( PP ) 카트리지 필터 제조시 공정인자가 필터소재의 여과특성에 미치는 영향
정수철(Su Chul Chung),안병길(Byeng Gil Ahn),임승순(Seung Soon Im) 한국공업화학회 2002 공업화학 Vol.13 No.6
Melt-blown 섬유 방사시스템을 사용하여 수처리용 폴리프로필렌(polypropylene, PP) 카트리지 전처리 필터를 제조하였다. Melt-blown 섬유 방사시스템의 공정인자들이 폴리프로필렌 카트리지 전처리 필터의 섬유구조와 충진밀도에 미치는 영향을 고찰하고자 하였으며, 공급 공기분출속도와 고분자토출량(polymer throughout rate, g/hole/min) 등과 같은 melt-blown 공정인자들을 변화시켜 제조된 폴리프로필렌 필터소재의 여과특성 변화를 연구하였다. Single 노즐이 장착된 melt-blown 섬유 방사시스템에서 고분자 토출량이 감소할수록, 공급 공기분출속도가 증가할수록 폴리프로필렌 방사 섬유의 직경이 감소하였다. 실험 결과, melt-blown 섬유 방사시스템에서의 공정인자를 조절함으로써 melt-blown 섬유 방사시스템에 의해 제조되는 수처리용 폴리프로필렌 카트리지 전처리 필터의 평균기공크기와 여과특성 조절이 가능함을 알 수 있었다. A polypropylene (PP) cartridge pre-filter media for water purification was obtained from a melt-blown extrusion method. The effect of melt-blown processing conditions on the fiber structure and the packing density of polypropylene cartridge filter element were investigated. And the filtration characteristics of them made in the various conditions of the melt-blown processing parameters, such as the air velocity and polymer throughout rate, were studied. The fiber diameters of what made with the melt-blown extrusion method which was equipped the single-nozzle decreased as the air velocity increased, however increased as the polymer throughout rate increased. The experimental results show the possibility of controling the mean pore size and filtration characteristics of polypropylene (PP) cartridge filter element for water purification with controlling of the processing conditions using the melt-blown extrusion method.
공업용 물유리를 출발물질로 한 흡수용 제올라이트 제조 공정 연구
임형미 ( Hyung Mi Lim ),정상진 ( Sang Jin Jung ),안병길 ( Byeng Gil Ahn ),최병현 ( Byung Hyun Choi ),이명영 ( Myung Young Lee ) 한국공업화학회 2003 공업화학 Vol.14 No.1
본 연구는 공업용 물유리와 액상 알루민산나트룸을 출발물질로 하여, A형 제올라이트를 합성할 때 합성 변수에 따른 결정형과 그 특성에 대한 것으로, 출발물질의 몰비, 반응온도, 숙성 조건, 결정화 조건 및 가열 속도에 따른 생성물의 결정형, 결정화도, 입자 형성, 입도, 양이온 교환능, 흡습량의 변화를 관찰하였다. 일반적으로는 숙성한 조건에서 생성된 입자가 더 작고 균일한 크기의 입자를 얻었다. 숙성과정을 거치지 않은 경우, 가열속도가 빠르면 경쟁상으로 알려진 소달라이트상이 일부 관찰되기도 한였다. 합성된 제올라이트는 주사전자현미경, X선 분말 회절 및 FT-IR 분광기를 이용해 분석하였다. 실온 고습 조건에서 흡습량을 확인한 결과 A형 제올라이트의 경우 초기 흡습 속도는시간당 0.3~0.4wt%이나 소달라이트는 시간당 0.07wt% 정도로 작고 15일 방치 후 최대 흡습량은 A형 제올라이트의 경우 26wt% 소달라이트는 14wt% 정도이다. In the synthesis of zeolite with industrial water glass and sodium aluminate, the synthesis condition and water adsorption characteristics of zeolite were studied. It was found that type of zeolite, crystallinity, morphology, cation exchange capacity, water adsorption capacity depended on molar ratio of starting material, reaction temperature, aging condition, crystallization condition, and heating rate. In general, aging led to production of zeolite particles with smaller and more uniform in size. Without aging, simultaneous formation of sodalite phase was apparent when the heating rate was fast. The products were analyzed by scanning electron microscopy, X-ray powder diffractometry, and FT-IR spectrometry. The initial water adsorption rate was 0.3~0.4wt%/h and 0.07wt%/h and the maximum water adsorption capacity was 26wt% and 14wt% for NaA and sodalite, respectively, in the humid chamber at room temperature.