http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김영완(Kim, Young-Wan),장성형(Jang, Seong-Hyung),윤왕중(Yoon, Wang-Joong),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
The P-wave velocity at the formation which contains gas hydrate varies very wide upon gas hydrate existence. These features on seismic shot gather can not be simulated normally by numerical modeling of homogeneous medium so that we need that of random inhomogeneous medium instead. We, in this study generated random inhomogeneous medium using gaussian ACF, exponential ACF and von Karman ACF and that we supposed the random inhomogeneous medium be gas hydrate formation to execute numeric modeling. The modeling result shows the typical effect by scattering caused by random hydrate formation as is observed from seismic shot gather where hydrate exist.
김영완(Kim, Young-Wan),장성형(Jang, Seong-Hyung),윤왕중(Yoon, Wang-Jung),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.10
Prestack depth migration is used to image for complex geological structure such as faults, folds, and subsalt. In this case, it is widely used the surface reflection data as a input data. However, the surface reflection data have intrinsic problems to image the subsalt and the salt flank due to the complex wavefields and multiples which come from overburden. For overcoming the structural defect of the surface reflection data in the imaging, I used the virtual sources in terms of seismic interferometry to image the subsurface and suppress the multiples using the velocity model of the lower part of the virtual sources. The results of the prestack depth migration using virtual source gathers and velocity model below receivers are similar geological interfaces to the results from shot gathers of the conventional ocean bottom seismic survey. And especially artificial interfaces by multiples were suppressed without applying any other data processing to eliminate multiples. This study results by numerical modeling can make a valuable imaging tool when it is applied to satisfied field data for specific condition.
가스 하이드레이트 탄성파 자료 코다 파 (coda waves) 연구
장성형(Jang, Seong-Hyung),서상용(Suh, Sang-Yong),김영완(Kim, Young-Wan) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
탄성파 코다 파는 두 수진기에서 기록된 탄성파 자료의 상호상관으로부터 두 신호에 대한 순간응답을 구하고 이로부터 지층정보를 구하는데 이용된다. 여기에서는 인공합성 탄성파 자료와 가스 하이드레이트 현장자료에 적용하여 상호상관 모음도와 가상음원 모음도 (virtual source)를 구하고자 하였다. 인공합성자료는 해저면 탄성파 탐사법 (ocean bottom seismic)을 모델로 이용하여 인공합성 탄성파 단면도를 제작하였으며, 탄성파 코다 파를 살펴보기 위해 인공 OBS 자료 중 첫 번째 트레이스를 가상음원으로 정하고 모든 음원 모음도와 상호상관으로 가상응원 단면도를 제작하였다. 현장자료 적용으로는 해저면 기인 고진폭 반사파인 BSR (bottom simulating reflection)을 포함하고 있는 자료를 선정하여 상호상관 단면도와 가상음원 단면도를 제작하였다. 중합단면도상에 나타난 가스 분출지역은 상호상관 단면도에서도 나타났으며, 중합단면도상 BSR부분은 vs 단면도에서 강한 반사파를 보여줌을 알 수 있었다.
지오빗에 의한 가스 하이드레이트 탄성파 자료 음향임피던스
장성형(Jang, Seong-Hyung),김영완(Kim, Young-Wan),도안후이히엔(Doan, Huy-Hien),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.11
속도와 밀도의 함수로 이루어진 음향 임피던스는 탄성파자로부터 물성변화를 확인하는 방법 중의 하나로 이용된다. 본 연구에서는 한국지질자원연구원에서 개발된 탄성파 탐사자료처리 무른모 지오빗올 이용하여 기본 자료처리를 실시하고, 음향 임피던스 변환 모듈올 적용하여 동해 가스 하이드레이트 현장자료에 대한 광역 임피던스변화를 구하고 이로부터 음향 임피던스 단면도를 구하고자였다. 음향 임피던스 단면도는 중합단면도상에서 음향 임피던스 변화를 보여주고 있으며 특히 왕복주시 2.9초 전후에서 해저면 반사파와 위상이 반대이며 고진폭을 나타내는 해저면 기인 고진폭 반사층으로 여길만한 지점에서 그 변화가 크게 나타남을 알 수 있었다. 탄생파자료는 10 Hz 이하 저주파 정보가 들어있지 않아 완전한 음향 임피던스를 구할 수 없으므로 층서해석이 이루어진 중합 단면도부터 광역 임피던스를 구하였다. 향후 시추자료를 활용할 경우 좀더 정확한 음향 임피던스 단면도를 생산할 수 있을 것으로 여겨진다.
도안 후이 히엔(Hien, D.H.),장성형(Jang, Seong-Hyung),김영완(Kim, Young-Wan),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
Deconvolution is one of the most used techniques for processing seismic reflection data. It is applied to improve temporal resolution by wavelet shaping and removal of short period reverberations. Several deconvolution algorithms such as predicted, spike, minimum entropy deconvolution and so on has been proposed to obtain such above purposes. Among of them, iota_1 norm proposed by Taylor et al., (1979) and used to compared to minimum entropy deconvolution by Sacchi et al., (1994) has given some advantages on time computing and high efficiency. Theoritically, the deconvolution can be considered as inversion technique to invert the single seismic trace to the reflectivity, but it has not been successfully adopted due to noisy signals of the real data set and unknown source wavelet. After stacking, the seismic traces are moved to zero offset, thus each seismic traces now can be a single trace that is created by convolving the seismic source wavelet and reflectivity. In this paper, the fundamental of iota_1 norm deconvolution method will be introduced. The method will be tested by synthetic data and applied to improve the stacked section of gas hydrate.
도안 후이 히엔(Hien, D.H.),장성형(Jang, Seong-Hyung),김영완(Kim, Young-Wan),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.10
Gas hydrate has been paid attention to study for because: 1) it can be considered as a new energy resources; 2) one of reasons causing the instability of sea floor slope and 3) a factor to the climate change. Bottom simulating reflector (BSR) defined as seismic boundary between the gas hydrate and free gas zone has been considered as the most common evidence in the seismic reflection data for the gas hydrate exploration. BSR has several characteristics such as parallel to the sea bottom, high amplitude, reducing interval velocity between above and below BSR and reversing phase to the sea bottom. Moreover, instantaneous attribute properties such as amplitude envelop, instantaneous frequency, phase and first derivative of amplitude of seismic data from the complex analysis could be used to analyze properties of BSR those would be added to the certain properties of BSR in order to effectively find out the existence of BSR of the gas hydrate stability zone. The output of conventional seismic data processing for gas hydrate data set in Ulleung basin in the East sea of Korea will be used for complex analyses to indicate better BSR in the seismic reflection data. This result of this analysis implies that the BSR of the analyzed seismic profile is clearly located at the two ways time (TWT) of around 3.1 seconds.
가스 하이드레이트 자료에 대한 중합전 키르히호프 심도 구조보정
도안 후이 히엔(Hien, Doan Huy),장성형(Jang, Seong-Hyung),김영완(Kim, Young-Wan),서상용(Suh, Sang-Yong) 한국신재생에너지학회 2007 한국신재생에너지학회 학술대회논문집 Vol.2007 No.06
Korean Institute of Geosciences and Mineral Resources (KIGAM) has studied on gas hydrate in the Ulleung Basin, East sea of Korea since 1997. Most of all, a evidence for existence of gas hydrate, possible new energy resources, in seismic reflection data is bottom simulating reflection (BSR) which parallel to the sea bottom. Here we conducted the conventional data processing for gas hydrate data and Kirchhoff prestack depth migration. Kirchhoff migration is widely used for pre- and post-stack migration might be helpful to better image as well as to get the geological information. The processed stack image by GEOBIT showed some geological structures such as faults and shallow gas hydrate seeping area indicated by strong BSR. The BSR in the stack image showed at TWT 3.07s between shot gather No 3940 to No 4120. The estimated gas seeping area occurred at the shot point No 4187 to No 4203 and it seems to have some minor faults at shot point No 3735, 3791, 3947 and 4120. According to the result of depth migration, the BSR showed as 2.3km below the sea bottom.