http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Work Function Change of W(123) Plane Due to Hydrogen and Deuterium Adsorption at 78 K
박노길(N. G. Park),김기석(K. S. Kim),김성수(S. S. Kim),정광호(K. Jeong),황정남(C. N. Whang),최대선(D. S. Choi) 한국진공학회(ASCT) 1992 Applied Science and Convergence Technology Vol.1 No.1
W(123) 표면위에 수소와 중소수가 흡착될 때 일함수의 변화를 장방출(Field Emission) 방법으로 측정하였다. 78K에서 이 분자들이 흡착될 때 일함수의 변화는 처음에는 증가하다가 최대치에 이른 후 감소하였고, 덮임율(coverage)이 증가함에 따라 포화되었다. 텅스텐 tip의 온도를 200 K까지 올렸을 경우에, 일함수의 변화가 최대가 되었을 때의 덮임율은 78K일 때의 비해 낮은 덮임율 쪽으로 이동하였고, [011] 방향을 갖는 step 혹은 terrace에 의한 일함수의 효과도 동시에 관측되었다. The changes in work function due to hydrogen and deuterium adsorption on W(123) plane are measured by means of Field Emission Method. In the case of hydrogen or deuterium adsorption, work function of W(123) plane at 78 K increase and after a maxium value, it decrease and saturated as increasing coverage. After annealing the tungsten emission tip at 200 K. the coverage corresponding to maximum change in work function was shifted toward low coverage and the effect of work function by terraces or steps of which orientation is [011] was observed.
박노길(N. G. Park),김기석(K. S. Kim),황정남(C. N. Whang),최대선(D. S. Choi) 한국진공학회(ASCT) 1993 Applied Science and Convergence Technology Vol.2 No.3
깨끗한 텅스텐 결정면의 일함수와 산소 흡착에 의한 텅스텐 결정면 ((123), (310), (221))의 일함수의 변화를 장전자 방출법으로 측정하였다. 일함수는 Fowler Nordheim equation을 사용하여 계산하였으며 흡착율을 결정할 수 있는 간단한 방법을 제시하였다. Work function for various clean W planes have been measured using a field electron emission method. For the loosely closed packed planes, i.e. (123), (310), (221), we have also measured the changes in the work function due to oxygen adsorption. Fowler Nordheim equation was employed to estimate the change in the work function. An empirical relation between coverage and dose was obtained.
김용욱(Y. W. Kim),박노길(N. G. Park),김기석(K. S. Kim),황정남(C. N. Whang),김성수(S. S. Kim),허경미(K. M. Huh),최대선(D. S. Choi) 한국진공학회(ASCT) 1994 Applied Science and Convergence Technology Vol.3 No.1
장전자 방출법을 이용하여 kink 또는 loosely closed pack의 텅스텐 결정면((310), (221), (211))의 수소흡착에 대한 일함수의 변화를 측정하고 상대 흡착율을 주입량과 일함수의 변화로 결정할 수 있는 방법을 제시하였다. 또한 (310)면과 (221)면에 대한 수소의 heat of desorption을 측정하였으며 초고진공 장치내에서 팔라듐의 수소 source로서의 가능성을 확인하였다. Work function changes for various W planes, i.e. (221), (310), (211), induced by hydrogen adsorption have been measured using a field electron emission method and Fowler Nordheim equation. We have also measured the heat of desorption of these planes. An empirical relation between coverage and dose was obtained. And a possibility of palladium as a hydrogen source in a UHV system was discussed.
텅스텐 결정면의 질소 흡착에 관한 연구 : I. (210)면
최대선(D. S. Choi),한종훈(J. H. Han),백선목(S. M. Paik),박노길(N. G. Park),김기석(K. S. Kim),황정남(C. N. Whang) 한국진공학회(ASCT) 1995 Applied Science and Convergence Technology Vol.4 No.4
W(210)면의 질소 흡착에 의한 일함수의 변화, heat of desorption 및 흡착 site에 대하여 조사하였다. 텅스텐 (210)면에 질소가 흡착될 때 흡착율에 따라 일함수는 증가하다가 최대 변화량 0.29 eV에서 포화되었다. TDS 결과로부터 이 면은 질소에 대하여 적어도 3개의 흡착 site가 있음을 알았고 high dose에서 흡착되는 β₁ state까지 포함하면 모두 4개의 흡착 site가 있으며 이 흡착 site들 중 α₁, state를 제외하고는 모두 일함수를 증가시키는 site임을 알았다. 질소는 W(210)면의 step((100)면)과 terrace((110)면)의 중 step 에 흡착되고 독립된, 즉 무한히 큰 W(100)면의 α₁, α₂그리고 β₂ state에 대응되는 흡착 site에 흡착된 질소의 dipole moment의 방향은 W(210) 면의 step((100)면의 일부)의 α₁, α₂그리고 β₂ state에 대응되는 흡착 site에 흡착된 질소의 dipole moment의 방향과 반대 방향임을 알았다 The heat of desorption, the work function change and the adsorption site of W(210) plane induced by nitrogen adsorption have been measured. The work function change of W(210) planes increases as the nitrogen dose increases and saturated at 3 L to 0.29 eV. The thermal desorption spectrum of N/W(210) shows that there are four adsorption sites including a site corresponds to β₁, state that appears at very high dose. We find that all these adsorption sites raise the work function of W(210) plane except a site corresponds to α₁, state, and nitrogen adsorbs on the step((100)) plane but not on the terrace((100)) plane. The direction of dipole moment of nitrogen adsorbed on the sites correspond to α₁, α₂ and β₂ states on step plane(this plane is a part of (100)) is found to be in opposite direction to that of infinite size of W(100) plane.
계단형 텅스텐 결정면의 질소 흡착에 관한 연구 : Ⅱ. W(210) 및 W(310)면
최대선(D. S. Choi),한종훈(J. H. Han),백선목(S. M. Paik),박노길(N. G. Park),김욕욱(Y. W. Kim),황정남(C. N. Whang) 한국진공학회(ASCT) 1996 Applied Science and Convergence Technology Vol.5 No.4
장전자 방출법으로 텡스텐 (210)면 및 (310)면(100)면의 질소 흡착에 의한 일함수의 변화에 heat of desorption을 측정하였으며 Thermal Desortion Spectra(TDS) 결과로부터 adsorption site를 예측하였다. 텅스텐 (210)면 및 (310)면에 에 질소가 흡착될 때 흡착율에 따라 일함수는 증가하다가 각 면에 대하여 흡착율 5 Langmuir일때 최대 변화량 0.29 eV및 0.20 eV에서 포화되었다. TDS 결과는 이 면들은 낮은 dose의 영역에서 각각 3개의 흡착 site가 있음을 보였으며 이 흡착 site들 중 α₁state의 spectrum의 강도는 (210)면에서 보다 (310)면에서 상대적으로 강해짐을 보였다. 또한 (210)와 (310)면의 α₁ 과 β₂ state의 흡착 site에 흡착된 질소의 dipole moment의 방향은 이 흡착 site들에 대응되는 (100)면의 α₁ 과 β₂state의 흡착 site에 흡착된 질소의 dipole moment의 방향과 반대 방향으로 측정되었으며 이 현상으로부터 질소의 상대적인 흡착 위치를 예측하였다. The heat of desorption and the work function change induced by nitrogen adsorption on the stepped tungstein surface planes, W(210) and W(310), are measured using the Field Electron Emission Microscope(FEM). The adsoption sites are predicted from the Thermal Desortion Spectra(TDS). The work function change of both W(210) and W(310) planes increase as increasing the nitrogen dose and saturates at the nitrogen dose about 5 Langmuir to 0.29 eV and 0.20 ev respectively. We find three adsorption site on each plane for the low dose range. The TDS result shows that the intensity of α₁, state on W(310) is much stronger than that of α₁ state on W(210), and the direction of nitrogen dipole moment adsorbed on the sites correspond to α₁, and β₂ states on W(210) and W(310) planes are in the opposite direction to that of the equivalent states on W(100) plane. From this observation we can predict the relative atomic position in the zdirection (perpendicular direction to the surface) of nitrogen molecules/atoms adsorbed on these sites.