http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Fe-20Cr-1.7C-1Si-xV 경면처리 합금의 미세조직과 고온 Sliding 마모저항성에 미치는 Vanadium의 영향
김준기,김근모,이덕현,장세기,강성군,김선진,Kim, Jun-Gi,Kim, Geun-Mo,Lee, Deok-Hyeon,Jang, Se-Gi,Gang, Seong-Gun,Kim, Seon-Jin 한국재료학회 1998 한국재료학회지 Vol.8 No.10
Fe 계 합금의 적층결함에너지를 감소시키는 거승로 알려진 vanadium이 Fe-20Cr-1.7C-1Si합금의 미세조직과 고온 마모저항성에 미치는 영향에 대하여 조사하였다. Fe-20Cr-1.7C-1Si-xV (x=0, 1, 3, 6, 10wt.%)조성에서 오스테나이트 기지상을 유지하면서 첨기될 수 있는 V의 최대 첨가량은 약 3wt.%이었으며 오스테나이트 기지상을 갖는 합금은 상온에서 낮은 적층결함에너지와 $\gamma->\alpha$ 변형유기 상변태에 의해 페라이트 합금보다 높은 마모저항성을 보인 것으로 생각된다.$225^{\circ}C$에서 $\alpha$ 생성량도 많은 것으로 보다 V은 Fe-20Cr-1.7C-1Si 합금의 온도에 따른 적층결함에너지 증가율를 억제하고 Md온도도 증가시킴으로써 고온 마모저항성을 증가시키는 것으로 생각된다. The effect of vanadium, which is known to decrease the stacking fault energy of Fe-base alloys, on the microstructure and elevated temperature sliding wear resistance of Fe-20Cr- 1.7C- 1Si alloy was investigated. The maximum amount of vanadium maintaining the austenitic matrix seems to be about 3wt.% in Fe-20Cr- 1.7C-1Si-xV (x = 0, 1, 3, 6. lOwt.%) alloys and the austenitic alloys showed better wear resistance than ferritic alloys. It was considered to be due to the low stacking fault energy and $\gamma->\alpha$ strain-induced phase transformation at rmm temperature. It was shown from elevated temperature sliding tests up to .$225^{\circ}C$ that the addition of vanadium increases the temperature, at which the transition from oxidative wear to adhesive wear occur, and the amount of d formed at $225^{\circ}C$. Thus, it was considered that the addition of vanadium improves the elevated temperature sliding wear resistance of Fe-20Cr- 1.7C - 1Si by reducing the increasing rate of stacking fault energy with temperature and by increasing Ma temperature.
기계적합금화한 Al-Ti 합금의 고온 인장 특성에 미치는 Ce의 첨가와 등온열처리의영향
김준기,오영민,김용덕,김병철,김선진,Kim, Jun-Gi,O, Yeong-Min,Kim, Yong-Deok,Kim, Byeong-Cheol,Kim, Seon-Jin 한국재료학회 1997 한국재료학회지 Vol.7 No.5
기계적합금화 한 AI-Ti합금의 상온 및 고온 인장강도는 25at.% Ti을 Ce으로 치환함에 따라 증가하였다. 그러나 25at.% 이상의 Ce첨가는 합금의 인장강도를 감소시켰다. 이는 Ce이 적은 고용도 효과에 의해 금속간화합물의 초대화를 억제하여 합금의 강도를 증가시키지만 다량 첨가시에는 Ti에 비해 무거운 원자량으로 인해 분산상의 부피분율을 감소시켜 합금의 강도가 오히려 저하시킨 것으로 생각된다. Ce의 첨가는 40$0^{\circ}C$와 51$0^{\circ}C$에서 합금의 열저안정성을 향상시키는 것으로 나타났다. 300-51$0^{\circ}C$ 온도범위에서 측정된 AI-8wt.%(Ti+Ce)합금의 변형에 필요한 활성화에너지는 AI의 자기확산에 필요한 에너지 (142kJ/mode)의 1.3-1.9배로 나타났다. 이로부터 AI-Ti-Ce 합금의 고온 변형은 Orowan기구에 의한 것을 생각된다.
기계적합금화한 Al-8wt.%(Ti+Zr)합금의 열적안정성에 미치는 Ti : Zr첨가비의 영향
김준기,김선진,Kim, Jun-Gi,Kim, Seon-Jin 한국재료학회 1995 한국재료학회지 Vol.5 No.8
The effect of Zr content on the thermal stability of mechanically alloyed Al-8wt.% (Ti+Zr) alloys was investigated. As the Zr to Ti addition ratio increased the decrease of hardness due to the long time exposure at high temperature reduced so that the thermal stability of the alloy was improved. From the TEM work it was found that the coarsening of precipitates was responsible for the decrease of hardness and the coarsening of precipitates could be suppressed by the addition of Zr, XRD, SAD and EDS analyses confirmed that these precipitates were consisted of DO$\sub$22/, and DO$\sub$23/ type Al$_3$(Ti+Zr) ternary in termetallic compounds. Especially for the DO$\sub$23/ Al$_3$(Ti+Zr), the lattice parameter changed toward the smaller lattice mismatch between the precipitate and Al matrix as the Zr content increased. Therefore, it was considered that the improvement of thermal stability of Al-8wt.% (Ti+Zr) alloys was due to the formation of the ternary Al$_3$( Ti + Zr) intermetallic compounds. 기계적합금화한 Al-8wt.%(Ti+Zr)합금의 열적안정성에 미치는 Zr첨가의 영향에 대하여 조사하였다. Ti에 대한 Zr의 첨가비가 증가함에 따라 고온에서 장시간 노출에 따른 합금의 경도감소가 저하되어 합금의 열적안정성이 향상된 결과를 나타내었는데 이는 TEM 관찰결과 분산입자의 조대화가 억제되었기 때문이었다. XRD, SAD 및 EDS 분석결과 이러한 분산입자들은 DO$_{2+}$와 DO$_{23}$구조를 갖는 $Al_3$(Ti+Zr)삼원계 금속간화합물이었으며 특히 DO$_{23}$Al$_3$(Ti+Zr)은 Zr의 첨가비가 증가함에 따라 보다 작은 Al기지와의 격자간불일치도를 갖는 방향으로 격자상수가 변화하여 합금의 열적안정성 향상에 주된 기여를 한 것으로 생각된다
김준기(Kim Jun Gi) 한국디자인학회 2005 한국디자인학회 학술발표대회 논문집 Vol.2005 No.10
사람의 눈은 카메라와 흡사한 구조와 원리를 가지고 있어서 빛을 직접 받는 경우 조리개가 오므라지게 되어 오히려 피사체를 인식하는 데 어려움을 겪는다. 그 이유는 광원과 피사체 간의 조도(밝기) 차이로 설명할 수 있다. 사람의 동공은 눈으로 들어오는 빛의 밝기에 따라 커지고 작아진다. 따라서 광원이 너무 밝은 경우에는 상대적으로 피사체에서 반사된 빛이 안구로 적게 들어와 피사체가 오히려 어두워 보이는 결과를 초래한다. 대부분의 사람들은 이 같은 사실을 간과한 채, 조명은 무조건 밝아야 한다고 믿어 왔으며, 그 결과 우리가 속한 모든 건물들은 직접조명 일색이다. 선진국에서는 이미 조명이 인체에 미치는 영향에 관한 연구가 지속적으로 발전함에 따라 이미 오래전부터 간접조명 방식이 채택됐다. 간접조명의 효과는 영역을 넘어서서 건강한 실내 공간을 조성하는 필수적인 요소로 자리매김하고 있다. 이제 현대인들은 눈에 피로감을 주는 노출형 조명보다는 점차 눈을 편하게 해서 몸과 정신의 피로를 릴렉스 시켜주는 간접조명방식을 나아가야 할 것이다.
김준기(Jun Gi Kim),박우배(Woo Bae Park),김지일(Ji Il Kim),문인성(In Sung Moon),전정수(Chung Soo Chung) 대한소화기학회 1993 대한소화기학회지 Vol.25 No.5
Gastric leiomyoblastoma is an unusual smooth muscle tumor which is different frorn the leiomyoma or leiomyosarcoma on histologic appearance and biologic behavior. It was first described by Martin and others in 1990. The major difference is their histologic appearance. The leiomyoblastoma is composed of round or polygonal cells instead of spindle cell in light microscopy. Most of thesc tumors are benign and have better prognosis than other srnooth muscle tumors. Recently, We experienced one case of leimyoblastoma of the stomach in 54 year-old male patient treated with subtotal gastrectomy with good results and report with brief review of literatures