http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전압방정식에서 시변성이 고려된 파라미터에 의한 토크 리플 산정
김규화(Gyu-Hwa Gim),조규원(Gyu-Won Cho),김규탁(Gyu-Tak Kim) 대한전기학회 2017 전기학회논문지 Vol.66 No.7
In this paper, the calculation torque using the d-q axis has advantage like faster execution time. However, the torque ripple can"t be considered in the torque calculation using d-q axis equivalent circuit because the time-dependent component is removed. When d-q transformation was performed, it was founded that some parameters has some characteristics. These characteristics were considered for representing torque ripple. The calculation with d-q axis transformation and Finite Element Analysis(FEA) were performed, and the results were compared. As a result, it was validated that the calculated torque can be expressed with ripple
고정자 치 끝 형상에 따른 IPMSM과 CP type IPMSM의 특성 비교
김규화(Gyu-Hwa Gim),김용태(Yong-Tae Kim),박병준(Byung-Jun Park),김규탁(Gyu-Tak Kim) 대한전기학회 2018 대한전기학회 학술대회 논문집 Vol.2018 No.-
매입형 영구자석 동기전동기(IPMSM)은 고 에너지 밀도를 가지며 응용분야가 넓어지고 있다. 희토류 자석의 공급의 불안정으로 인해 가격 상승의 여파로 인해 영구자석 사용을 저감하는 여러 연구들이 활발히 진행되어왔다. 그 중 회전가 자석 쌍극 중 한 극만 사용하고, 자석을 철심으로 대체하는 Consequent Pole(CP) type IPMSM을 제안한다. CP type IPMSM의 자기적 불평형으로 인해 토크리플을 저감하기 위해 고정자 형상 설계를 제안한다. 우선적으로 일반적인 IPMSM에 적용하여 결과를 비교한다. 그리고 이 제안된 고정자 형상 설계를 동일하게 CP type IPMSM에 적용하였을 때의 현상을 고찰한다.
600W급 Consequent Pole Type IPMSM 설계 및 특성 비교
김규화(Gyu-Hwa Gim),박병준(Byung-Jun Park),김용태(Yong-Tae Kim),김규탁(Gyu-Tak Kim) 대한전기학회 2018 전기학회논문지 Vol.67 No.8
The Permanent Magnet Synchronous Motor(PMSM) has various advantages. However, new types of research have been carried out because of rising prices of materials for rare earth magnets used in PMSM and also unstable supply. In this paper, we propose Consequent Pole(CP) type IPMSM for magnet reduction. The shape of CP type IPMSM stator was same with Basic model IPMSM. The design of the rotor shape was proceeded that CP type IPMSM achieved the same output as the basic model IPMSM. Finally, the selected model and IPMSM were compared and discussed.
d,q 축 전압 방정식에서 시변 파라미터를 고려한 토크 리플 산정
김규화(Gyu-Hwa Gim),고덕화(Duk-Hwa Go),조규원(Gyu-Won cho),장기봉(Ki-Bong Jang),김규탁(Gyu-Tak Kim) 대한전기학회 2017 대한전기학회 학술대회 논문집 Vol.2017 No.4
d, q축 전압방정식을 이용한 토크 계산은 수행 시간이 매우 짧고 효과적으로 성능 평가에 적용할 수 있으나, 토크리플의 고려할 수 없다. 본 논문에서는 시간 의존성이 없는 d, q 축 전압방정식에서 특정 파라미터의 리플을 관측하였고, 이를 고찰하였다. 인덕턴스와 쇄교자속의 변화를 관측하였고 이는 전압 또한 가변화 될 것을 예측 및 관측하였다. 따라서, 쇄교자속의 변화는 토크 또한 변화하고 있음을 알 수 있다. d, q 축 수식 계산된 토크와 유한요소 해석의 결과를 비교 분석한다.
소형 Slot less PMSM의 coil 배치에 따른 최적 설계 및 열 내구성 분석
김용태,고덕화,김규화,백성민,김규탁,Kim, Yong-Tae,Go, Duk-Hwa,Gim, Gyu-Hwa,Baek, Sung-Min,Kim, Gyu-Tak 대한전기학회 2017 전기학회논문지 Vol.66 No.1
In this paper, slot less type high-speed and compact motor was designed. it was selected through change of stator coil distribution for the optimal performance of the motor. In this paper, designed motor was expected to be very vulnerable to heat dissipation in a compact motor. Therefore, to ensure reliability in the design result, winding and permanent magnet damage caused by the losses of motor was analyzed by thermal analysis and demagnetization analysis. Using the result, whether motor burnout was confirmed by motor performance degradation and insulation breakdown.