http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
산소와 구리의 공정반응에 의한 구리와 알루미나의 직접접합
이임렬,유환성 단국대학교 신소재기술연구소 1991 신소재 Vol.1 No.-
본 연구에서는 구리표면의 구리-산소간의 공정반응에 의하여 형성된 Cu-Cu_2O 공용액상 피막으로 고체 Cu금속과 Al_2O_3세라믹을 압력없이 직접접합시키는 방법을 조사하였으며 접합조건에 따른 접합특성, 파면 및 계면분석을 SEM, EDS, XRD 및 peeling 시험을 통하여 분석하였다. 1.5×10^-1 torr 진공하에서 1015℃의 온도에서 산화시킨 구리시편은 미세한 산화물 Cu_2O가 표면에 잘 형성되었다. 그후 공정온도 1065℃ 이상의 접합온도 1075℃에서 5분간 10^-3 torr의 진공하에서 직접접합시킨 시편은 접합력이 우수한 Cu/Al_2O_3 접합이 되었으며 접합후 구리기니 내에는 Cu2O가 석출된 공융조직을 갖고 있었다. 3분 산화조건에서 충분한 액상이 형성되어 29kg의 최대 접합강도를 보였으며 산회시간이 이보다 짧거나 불충분한 액상의 형성이나 산화물내의 균열 등으로 결합력이 저하하였다. 파단후 Al_2O_3 표면에는 Cu_2O nodule이 존재하였고 Cu족에는 nodule이 빠진홈을 관찰할 수 있었는바 cu2O/Al_2O_3계면 접착력은 Cu.Cu_2O계면보다 강함을 알 수 있었다. 또한 파단면에는 반응 생성물 CuAlO_2가 접합중 형성되었으나 이 반응층 두께는 SEM분해능 이하인 매우 얇은 것으로 생각된다. The direct bonding between Cu and Al_2O_3, utilizing Cu-Cu_2O skin melt formed on Cu surface by eutectic reation of Cu-O, is investigated in this study. The bond strength, fracture surface and interface structure with bonding conditions have been studied using SEM, EDS, XRD and peeling test. A fine Cu_2O is formed on the surface of Cu with oxidation at 1015℃ under 1.5×10^-1torr vacuum. After oxidation, the bonded specimen conducted at 1075℃ in 10^-3torr vacuum for 5minutes, higher temperature than its eutectic temperature of 1065℃, has a good strength having a Cu_2O precipitated structure in Cu matrix upon cooling. It has been found that the maximum bonding force of 29kg is obtatined for 3 minutes of oxidation. However, the adhesion forces are decreased with shorter or longer oxidation than this due to the formation of insufficient liquid skin or crack within oxide. After peeling test, Al_2O_3 surface is covered with Cu_2O nodules which are pulled out of Cu surface indication that Cu_2O/Al_2O_3 adhesion force is stronger than that of Cu/Cu_2O. Moreover a reaction phase of CuAlO_2, thought to be very thin layer below the resolution of SEM, is also formed during the bonding process.
李任烈 단국대학교 1986 論文集 Vol.20 No.-
The wear experiment was conducted on couples consisting of iron, nickel, Fe-36% Ni and 3% silicon steel pins sliding against a tool steel disc. It has been found that the wear rate in air at room temperature lis independent to me hardness. The experimental observations are well related to the oxidation characteristics. However, the rate of oxidative wear is much higher than that for static oxidation due to the difference in the activation energy for oxidative wear. The lower energy for oxidational wear indicates that the rubbing surfaces are mechanically activated and high diffusivity path for diffusion of matrix elements and oxygen are produced during the sliding motion. The higher wear rate for cold-worked samples than for the annealed ones are associated with the higher oxidation rate for the cold-worked specimen.
Pinnal dermatitis caused by Arthroderma vanbreuseghemii in a Rex rabbit
Rhim, Haerin,Na, Ki-Jeong,Han, Jae-Ik The Korean Society of Veterinary Service 2017 韓國家畜衛生學會誌 Vol.40 No.1
This report describes a case of pinnal fungal dermatitis caused by Arthroderma vanbreuseghemii in a Rex rabbit diagnosed by clinical signs, macro- and microscopic examination, molecular and phylogenetic analyses. This is the first description of natural A. vanbreuseghemii infection in rabbits in South Korea.
Pervaporation Separation of Trace VOCs from Water Through PDMS Membranes
Rhim, Ji-Won,Kwon, Young-Mann The Membrane Society of Korea 1999 Korean Membrane Journal Vol.1 No.1
The removal of trace chlorinated and aromatic hydrocarbons from water by a pervaporation technique has been carried out through poly (dimethylsiloxane) membrane which had been fabricated by the addition crosslinking reaction. This study dealt with the swelling and permeation behaviors of the PDMS membranes with dichloroethane trichloroethane and toluene aqueous solutions. The swelling ratio in the toluene aqueous solution was much higher than those in the chloroethane solutions at all of the operating temperatures and concentrations. The solubility parameter theory was introduced to interpret the affinity between permeates and a membrane material and in all cases this approach seemed to be proper. It was suggested that the existence of water clusters in the membrane due to the hydrophobic characteristics of the membrane made the size of the permeating water larger resulting in suppressing water permeation and increasing enrichment of the organic components. The permeation behaviors at different membrane thicknesses were indirectly interpreted in terms of the effect of concentration polarization.
Tensile, water vapor barrier and antimicrobial properties of PLA/nanoclay composite films
Rhim, J.W.,Hong, S.I.,Ha, C.S. Academic Press, etc 2009 FOOD SCIENCE AND TECHNOLOGY -ZURICH- Vol.42 No.2
PLA-based composite films with different types of nanoclays, such as Cloisite Na<SUP>+</SUP>, Cloisite 30B and Cloisite 20A, were prepared using a solvent casting method and their tensile, water vapor barrier and antimicrobial properties were tested. Tensile strength (TS), elongation at break (E), and water vapor permeability (WVP) of control PLA film were 50.45+/-0.75MPa, 3.0+/-0.1%, and 1.8x10<SUP>-11</SUP>gm/m<SUP>2</SUP>sPa, respectively. TS and E of nanocomposite films prepared with 5g of clay/100g of PLA decreased 10-20% and 11-17%, respectively, depending on the clays used. On the contrary, WVP of the nanocomposite films decreased 6-33% through nanoclay compounding. Among the clay types used, Cloisite 20A was the most effective in improving the water vapor barrier property while sacrificing tensile properties the least. The effect of clay concentration tested using Cloisite 20A showed a significant decrease in TS and WVP, with increases in clay content. Among the PLA/clay composite films tested, only PLA/Cloisite 30B composite film showed a bacteriostatic function against Listeria monocytogenes.
Plasma protein profiles in early asthmatic responses to inhalation allergen challenge
Rhim, T.,Choi, Y.-S.,Nam, B.-Y.,Uh, S. T.,Park, J. S.,Kim, Y.-H.,Paik, Y.-K.,Park, C.-S. Wiley (Blackwell Publishing) 2009 Allergy Vol.64 No.1
<P>Although mediators, such as lipids, cytokines, and chemokines, are related to the appearance of an IPR, there has been no reliable indicator to predict conditions for the appearance of an IPR. In this study, we adopted a proteomic approach to investigate the pathogenesis at the level of the plasma proteins and to develop plasma markers to predict the appearance of an IPR following an inhalation challenge with Dermatophagoides pteronyssinus (D.p.). Sixteen mild asthmatics were recruited. Plasma was obtained before challenge and when a decline in forced expiratory volume in 1 s (FEV(1)) values greater than 20% from the phosphate-buffered saline value was achieved during D.p. allergen challenge (positive responders), or at 60 min after the highest concentration of D.p. allergen was inhaled (negative responders). After comparing normalized volumes of the spots in the two groups, differentially expressed spots were identified using intra-gel digestion and mass spectrometric analysis. Before D.p. antigen challenge, four spots of gamma fibrinogen and its isoforms were significantly decreased and two spots of complement C3 fragments were significantly increased in the positive responders compared to the negative responders. After D.p. antigen challenge, complement C3 fragment was persistently higher, while gamma fibrinogen was lower in the positive responders than in the negative responders. A validation study using Western blotting showed that gamma fibrinogen expression in the IPR-positive asthmatics was significantly decreased compared to the average of the IPR-negative asthmatic control group. These results indicate that alterations in the complement cascade and fibrinogen may predispose patients to the appearance of an immediate response to D.p. allergen challenge and may provide plasma markers to predict the appearance of an IPR.</P>