http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Peikang Bai (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Yuxin Li,Keqiang Su,Peikang Bai,Liyun Wu,Bin Liu,Hongwen Su,Wenbo Du 대한금속·재료학회 2019 METALS AND MATERIALS International Vol.25 No.5
The Ti/TiBCN composite coatings were fabricated on the substrate of Ti6Al4V alloy by laser cladding. The effects of TiBCNcontent on the microstructre, microhardness, corrosion resistance and tribological properties of the composite coatings werestudied. The results showed that, when the TiBCN content was 60 wt%, the composite coatings were mainly composed ofthe dendritic and rod-shaped TiBCN phases, small white lump TiC phases, fine lamellar TiN phases, small and scatteredwhite block TiB2phases, In addition, there was a small quantity of short whisker Al3Tiphases and uniform layer blockTiAl phases. Furhtermore, the maximum microhardness was 1596 HV, which was about 4.6 folds greater than that of thesubstrate; the corrosion potential (Ecorr) reached − 1.258 V and the corrosion current density (Icorr) was 4.035 × 10−5 A/cm2,which was one order lower than that of the substrate (1.172 × 10−4 A/cm2); the worn surface was relatively smooth and themass loss (1.22 g) was only 9/50 of that of the substrate (6.71 g).
-
Yuxin Li,Jinhao Nie,Yixin Yang,Peikang Bai,Hongjian Zhang,Zhanyong Zhao,Shouzheng Wei,Jie Cai,Qingfeng Guan 대한금속·재료학회 2022 METALS AND MATERIALS International Vol.28 No.2
To improve the high-temperature resistance of the key hot-end parts of the steam turbine, NiCoCrAlY coatings were depositedon a 304 stainless steel substrate by laser cladding. The microstructure and high-temperature oxidation behavior of theNiCoCrAlY coatings were analyzed. The results showed that the NiCoCrAlY coatings contained γ/γ′ and β phases, and themicrostructure was mainly composed of elongated columnar crystals. In addition, after 100 h of oxidation at three differentoxidation temperatures (750, 850 and 950 °C), the coatings showed a relatively low oxidation rate, which was approximatelya quarter of the oxidation rate of the substrate. At the same time, the protective Cr2O3scales were formed on the coatingsurface. When the oxidation temperature was 850 °C, the FeCr2O4spinel formed and internal oxidation zone appeared,when the oxidation temperature reached 950 °C, the FeCr2O4spinel gathered in the local area on the surface of the Cr2O3scale and the internal oxidation was aggravated. In other words, as the oxidation temperature increased, the Fe element inthe matrix formed the FeCr2O4spinel, which accelerated the consumption of Cr element in the coatings and reduced theoverall oxidation resistance of the NiCoCrAlY coatings.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
