http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
M.E. Rivas-Aguilar,N. Hernandez-Como,G. Gutierrez-Heredia,A. Sánchez-Martínez,M. Mireles Ramirez,M.A. Quevedo-López 한국물리학회 2018 Current Applied Physics Vol.18 No.7
In this work, the specific contact resistance (ρc) between amorphous indium-gallium-zinc-oxide (IGZO) semiconductor and different contact electrodes was obtained from thin film transistors (TFTs). Ti/Au (10/100 nm), aluminum doped zinc oxide (AZO, 100 nm) and indium tin oxide (ITO, 100 nm) were used as source/drain electrodes to fabricate IGZO TFTs. Chemical states of the contacts/semiconductor interfaces were examined by depth profile X-ray photoelectron spectroscopy (XPS) analysis to explain the origin of the differences on specific contact resistance. The lowest ρc achieved using Ti/Au was related to the formation of a TiOx interlayer due to oxygen atoms diffusing out from the semiconductor under layer, increasing the carrier concentration of IGZO at the interface and lowering the ρc. On the contrary, no interfacial reactions were observed between IGZO and AZO or ITO source/drain. However, IGZO resistivity increased with ITO contacts likely due to oxygen vacancies filling during ITO deposition. This fact seems to be the origin of the high contact resistance between IGZO and ITO, compared to IGZO-AZO and IGZO-Ti/Au interfaces.