http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
M. M. Hoseini-Athar,B. Tolaminejad 대한금속·재료학회 2016 METALS AND MATERIALS International Vol.22 No.4
Explosive welding is a well-known solid state method for joining similar and dissimilar materials. In the present study, tri-layered Al-Cu-Al laminated composites with different interface morphologies were fabricated by explosive welding and subsequent rolling. Effects of explosive ratio and rolling thickness reduction on the morphology of interface and mechanical properties were evaluated through optical/scanning electron microscopy, micro-hardness, tensile and tensile-shear tests. Results showed that by increasing the thickness reduction, bonding strength of specimens including straight and wavy interfaces increases. However, bonding strength of the specimens with melted layer interface decreases up to a threshold thickness reduction, then rapidly increases by raising the reduction. Hardness Values of welded specimens were higher than those of original material especially near the interface and a more uniform hardness profile was obtained after rolling process.
An analytical solution of the ECAE process of bi-layer strip using a Bezier type streamline
B. Tolaminejad,M. M. Hoseini-Athar 대한기계학회 2016 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.30 No.2
Co-extrusion of strips of different strength and ductility is a process in the production of bimetal rods of desirable physical and mechanical properties. Equal channel angular extrusion (ECAE) is an innovative process for applying severe plastic deformation to materials. The present study is concerned with the ECAE of different bi-layer strips. Developing a kinematically admissible velocity field using a Bezier-type streamline is the aim of present research. In this analysis, using the mentioned velocity field and the upper bound theorem, the extrusion force as well as the strain distribution in the deformation zone of the ECAE process are predicted. The solution takes into account the die profile, friction conditions, strength, arrangement and thickness ratio of the layer materials. Experimental results of ECAE of aluminum/copper and aluminum/mild steel bi-layer strips showed a good agreement with the predicted results.