常用詞“甘”、“甜”歷時演變與興替研究

?玉君(Gan Yeechin),朴敏浚(Park, Min-jun) 중국어문학연구회 2017 중국어문학논집 Vol.0 No.105

It is important to study the diachronic change and replacement of old words by new ones in Chinese etymology as the process does not happen and complete within a short span of time. This paper propose an in-depth study on gan (甘) and tian (甜) by investigating a number of historical documents of various registers from the Pre-Qin to the Ming and Qing dynasties. Based on the diachronic perspective, we conduct a quantitative analysis to show the lexical development and replacement process of gan (甘) and tian (甜) in its original and extended meanings. In the meantime, we also describes usage pattern and competition process of the two words in different periods, by comparing them in terms of usage frequency, semantic expression and syntactic distribution. Because gan (甘) is a polysemy with multiple meanings since the Pre-Qin dynasty, a new word tian (甜) with a single meaning of sweet taste emerged in the Western Han dynasty, which is subsequently commonly used in oral literature in the Wei and Jin dynasties. Afterwards, tian (甜) went into competition with gan (甘) in the Tang and Song dynasties, whose meaning was in turn further extended to psychological and sensory domains in the Ming and Qing dynasties. In modern Chinese, gan (甘) came to only function as a morpheme through semantic bleaching whereas tian (甜) often appeared in sentential structure. The semantic and syntactic functions of the two words remain stable and still in use.

Low Resistance and Transparent Ag/AZO Ohmic Contact to p-GaN

T. Han,T. Wang,X. W. Gan,H. Wu,Y. Shi,C. Liu 한국물리학회 2014 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.65 No.1

Silver (Ag)/ aluminum-doped zinc oxide (AZO) films were deposited on p-GaN by using electronbeamevaporation. After the annealing process, current -voltage (I-V) measurements were carriedout to determine the characteristic of the contacts. The Ag/AZO films annealed at 600 C werefound to present an ohmic contact behavior. The specific contact resistance was calculated tobe 9.76 × 10−4cm2 and the transmittance was over 80% for visibly light. The atomic forcemicroscope was used to measure the aggregation of Ag grains which may have been the main factorin the formation of the Ag/AZO ohmic contact to p-GaN.

Cryptanalysis of a Multi-user Quantum Network System and Quantum Communication Using Χ-type Entangled States

Gan Gao 한국물리학회 2013 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.62 No.8

A quantum secure direct communication and quantum key distribution(QSDC-QKD) protocol based on Χ-type entangled states was recently proposed by Hong et al. [J. Korean Phys. Soc. 61, 1 (2012)]. By analyzing the protocol, we find that it is not secure; that is, the eavesdropper can eavesdrop on half of Bob’s secret messages and half of Alice’s secret keys without introducing any error.

12/4 SynRel machine design with concentrated windings and novel polynomial fitting model‑based continuous MTPA control method

Gan Zhang,Anjian Qiu,Taixun Zhang,Wei Hua,Xibin Guo 전력전자학회 2023 JOURNAL OF POWER ELECTRONICS Vol.23 No.7

This paper proposes a 12-stator slot/4-rotor pole (12/4) synchronous reluctance (SynRel) machine with integral slot concentrated windings (ISCW), a segmented stator, and a skewed rotor, namely the 12/4 ISCW machine. The proposed 12/4 ISCW machine exhibits comparable torque performance when compared to the case of adopting an integral slot distributed winding (ISDW) with the same total stack length. A comparison study is conducted on the 12/4 ISCW machine, a 24/4 ISDW machine, and 6/4 fractional slot concentrated winding (FSCW) machines. Then a torque prediction method and a continuous maximum torque per ampere (MTPA) control based on the polynomial fitting model (PFM) are proposed for SynRel machines, to provide fast and accurate calculation of the real-time inductances and torque. Magnetic saturations are also considered in the PFM, which is why the PFM has great potential in the maximum-current-per-torque control of SynRel machines. Finally, a prototype of the proposed 12/4 ISCW SynRel machine is manufactured and experimental validations are carried out.

MicroRNA-375 is a therapeutic target for castration-resistant prostate cancer through the PTPN4/STAT3 axis

Gan Junqing,Liu Shan,Zhang Yu,He Liangzi,Bai Lu,Liao Ran,Zhao Juan,Guo Madi,Jiang Wei,Li Jiade,Li Qi,Mu Guannan,Wu Yangjiazi,Wang Xinling,Zhang Xingli,Zhou Dan,Lv Huimin,Wang Zhengfeng,Zhang Yanqiao,Q 생화학분자생물학회 2022 Experimental and molecular medicine Vol.54 No.-

The functional role of microRNA-375 (miR-375) in the development of prostate cancer (PCa) remains controversial. Previously, we found that plasma exosomal miR-375 is significantly elevated in castration-resistant PCa (CRPC) patients compared with castration-sensitive PCa patients. Here, we aimed to determine how miR-375 modulates CRPC progression and thereafter to evaluate the therapeutic potential of human umbilical cord mesenchymal stem cell (hucMSC)-derived exosomes loaded with miR-375 antisense oligonucleotides (e-375i). We used miRNA in situ hybridization technique to evaluate miR-375 expression in PCa tissues, gain- and loss-of-function experiments to determine miR-375 function, and bioinformatic methods, dual-luciferase reporter assay, qPCR, IHC and western blotting to determine and validate the target as well as the effects of miR-375 at the molecular level. Then, e-375i complexes were assessed for their antagonizing effects against miR-375. We found that the expression of miR-375 was elevated in PCa tissues and cancer exosomes, correlating with the Gleason score. Forced expression of miR-375 enhanced the expression of EMT markers and AR but suppressed apoptosis markers, leading to enhanced proliferation, migration, invasion, and enzalutamide resistance and decreased apoptosis of PCa cells. These effects could be reversed by miR-375 silencing. Mechanistically, miR-375 directly interfered with the expression of phosphatase nonreceptor type 4 (PTPN4), which in turn stabilized phosphorylated STAT3. Application of e-375i could inhibit miR-375, upregulate PTPN4 and downregulate p-STAT3, eventually repressing the growth of PCa. Collectively, we identified a novel miR-375 target, PTPN4, that functions upstream of STAT3, and targeting miR-375 may be an alternative therapeutic for PCa, especially for CRPC with high AR levels.

Fault Diagnosis of Power Converter for Switched Reluctance Motor based on Discrete Degree Analysis of Wavelet Packet Energy

Gan, Chun,Wu, Jianhua,Yang, Shiyou Journal of International Conference on Electrical 2013 Journal of international Conference on Electrical Vol.2 No.3

Power converter plays a very important role in switched reluctance motor (SRM) systems, and it is also the easiest one to experience failures. Power converter faults will cause the motor to run in non equilibrium states, and a long time fault operation will lead to motor and other modules damaged, and make the system completely lose working stability. This paper uses an asymmetric bridge converter as the research object with three-phase SRM, employs the wavelet packet decomposition for the phase currents. It analyzes and studies the short circuit fault condition of IGBT, uses an energy discrete degree of the wavelet packet nodes as the fault characteristic, and conducts the corresponding experimental and simulation analysis to verify the effectiveness and practicality of the proposed method.

SPIRAL WAVE GENERATION IN A DIFFUSIVE PREDATOR-PREY MODEL WITH TWO TIME DELAYS

GAN, WENZHEN,ZHU, PENG Korean Mathematical Society 2015 대한수학회보 Vol.52 No.4

This paper is concerned with the pattern formation of a diffusive predator-prey model with two time delays. Based upon an analysis of Hopf bifurcation, we demonstrate that time delays can induce spatial patterns under some conditions. Moreover, by use of a series of numerical simulations, we show that the type of spatial patterns is the spiral wave. Finally, we demonstrate that the spiral wave is asymptotically stable.

Highly transparent Nd-doped yttria ceramics fabricated by hot pressing with ZrO₂ and La₂O₃ as sintering additives

Gan, Lin,Park, Young-Jo,Zhu, Lin-Lin,Kim, Ha-Neul,Ko, Jae-Woong,Lee, Jae-Wook Elsevier 2018 JOURNAL OF ALLOYS AND COMPOUNDS Vol.763 No.-

<P><B>Abstract</B></P> <P>Highly transparent Nd-doped yttria ceramics were fabricated by hot-pressing at 1600 °C with single addition and co-addition of ZrO<SUB>2</SUB> and La<SUB>2</SUB>O<SUB>3</SUB>. The binary additives were found to promote the densification of yttria more effectively than single addition, resulting in higher transmittance. The highest transmittance was obtained in the sample with 1 at.% ZrO<SUB>2</SUB> and 3 at.% La<SUB>2</SUB>O<SUB>3</SUB>, which reached 74.3% transparency at a wave length of 400 nm and 81.3% at 1100 nm. The optical absorption, luminescence, and fluorescence decay of this sample was investigated. The absorption cross-sections of the sample at 806 nm and 820 nm were 1.22 × 10<SUP>−20</SUP> and 1.31 × 10<SUP>−20</SUP> cm<SUP>2</SUP>, respectively. The strongest emission was measured at 1078 nm with a full-width at half-maximum of 5 nm with excitation at 808 nm and a fluorescence lifetime of 423 μs. Additionally, the microhardness of the all samples is ranging from 7.88 to 7.05 GPa with variation of the grain size from 0.85 to 1.81 μm, while the fracture toughness of the all samples is about 1 MPa m<SUP>1/2</SUP> and was found to be almost unchanged. These results have demonstrated that Nd-doped yttria ceramics for the application of laser gain media can be fabricated by hot-pressing.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Highly transparent Nd-doped yttria ceramics fabricated by hot-pressing. </LI> <LI> Effects of ZrO<SUB>2</SUB>-La<SUB>2</SUB>O<SUB>3</SUB> additives on the samples were studied. </LI> <LI> The optical and mechanical properties of the samples were studied. </LI> </UL> </P>

WATER RESOURCES CARRYING CAPACITY AND ITS ASSESSMENT

GAN HONG,WANG LIN,YOU JINJUN,YUAN YING 한국수자원학회 2005 한국수자원학회 학술대회 Vol.2005 No.1

Application of UV Photocatalytic Degradation of Benzene

Gan, Yi,Liu, Ruiqi,Yu, Zhimin Urban Science Institute 2019 도시과학 Vol.8 No.2

Benzene pollution is becoming increasingly serious, and the treatment technology of benzene has attracted much attention. In this paper, a self-made photocatalytic reactor was used to explore the removal rate of benzene under the ultraviolet light with the wavelength of 253.7nm. The results showed that the degradation rate of benzene decreased from 64.29% to 16.26% when the concentration increased from 43mg/㎥ to 256mg/㎥ under the condition of 28W UV light intensity and 50s residence time. Under the condition of 28W UV light intensity and 103mg/㎥ concentration, the residence time increased from 16.5s to 50s, and the benzene removal rate increased from 13.23% to 42.72%.Under the condition of benzene concentration 103mg/㎥ and residence time of 50s, the removal rate of benzene increased from 29.34% to 52.58% in the process of UV light intensity rising from 28W to 48W.It is concluded that decreasing the concentration and increasing the residence time of gas were beneficial to the removal of benzene and increasing the light intensity can improve the removal rate of benzene.