http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김동옥(D. O. Kim),이근민(K. M. Rhee),우한성(H. S. Woo),김기주(K. J. Kim),서명교(M. G. Seo) 한국재활복지공학회 2014 한국재활복지공학회 학술대회논문집 Vol.2014 No.11
본 연구는 국내외 장애인 특성화 대학 사례를 통해 장애 학생들의 직업기능 향상과 직업 교육을 위한 대학직업교육의 정보제공의 기초자료로 제공하는데 의의가 있다. 이를 통하여 국내외 장애인 특성화 대학 사례조사를 통해 장애인직업교육에서 장애학생들의 다양한 진로와 취업연계 그리고 직업기능인 양성을 위한 정책적 방향이 연구되어야 할 것이다.
김동옥(D.O.Kim),정국영(G.Y.Jung),오금곤(G.K.Oh),김영동(Y.D. Kim) 전력전자학회 2003 전력전자학술대회 논문집 Vol.2003 No.7(1)
To control the position, velocity and torque of the ultrasonic motor, a great variety of method are proposed such as the amplitude, phase difference, frequency and so on In the case of phase difference method, it has some advantages, it can control the direction and velocity of rotation only adjusting the phase difference and It has wide control-band During the USM driving on adjusting phase difference, Its characteristic was transformed by the change of resonance-frequency of stator, which means that the resonance frequency is different according to the phase difference Consequently, we need to set up the most suitable driving frequency according to each phase difference
김동옥(D. O. Kim),이근민(K. M. Rhee) 한국재활복지공학회 2009 한국재활복지공학회 학술대회논문집 Vol.2009 No.10
본 연구는 대중교통을 이용하기 어려운 양상지 중증 장애인에게 이동권확보가 제약되는 현실에서 양상지 중증 장애인의 자가운전은 일반인 보다 더 큰 의미가 부여되며, 독립생활을 가능하게 하는 중요한 요소이다. 그러므로 양상지 중증 장애인을 위한 족동운전장치의 이용시 불편요소에 대한 인간공학설적인 설계가 필요하다. 이를 위해 양상지 장애인의 자가운전을 위한 족동운전장치의 사용실태조사를 통하여 불편요소 파악과 개선방안을 제시하는데 그 목적이 있다.
청각장애인의 컴퓨터 교육에서 온라인 전문 속기사 지원을 활용한 보조공학서비스 사례 연구
김동옥(D. O. Kim),이근민(K. M. Rhee),S. Y. Kim 한국재활복지공학회 2013 한국재활복지공학회 학술대회논문집 Vol.2013 No.10
본 연구는 청각장애인 컴퓨터교육환경에서 IT용어의 수화사전 부족과 수화통역사 지원한계, 전문속기사의 비용절감을 극복하기 위해 청각장애인에게 온라인 및 오프라인 수업 환경에서 모두 적용할 수 있는 전문속기사에 대한 보조공학서비스를 적용해보았다. 이를 통해 청각관련 특수학교 및 대학 내 컴퓨터 이론 및 실습 전공과목에서 강사와 학생 간 질문사항에 상호 피드백 전달, 전문속기사 지원서비스를 통한 수업내용에 100% 자막처리, 수업환경에서 청각장애학생의 수업참여유도 및 학습이해도에 대한 효과성에서 좋은 방향을 제안하였다.
싸이벡스를 이용한 핸드바이크 시트 각도의 상지 회전력에 관한 연구
김동옥(D. O. Kim),유연호(Y. H. You),이근민(K. M. Rhee) 한국재활복지공학회 2016 재활복지공학회논문지 Vol.10 No.4
본 연구는 가변형 핸드바이크를 개발하기 위해서 손으로 구동하는 핸드바이크 사용자들이 싸이벡스를 이용하여 등받이각도별 상지회전력 값, 크랭크축과 가슴명치와의 거리에 대한 상지회전력 값, 그리고 핸드바이크의 손잡이 각도별 상지회전력 값을 토대로 핸드바이크 설계 가이드라인을 제시하기 위함이다. 본 연구를 위해 일반인 남자 3명을 대상으로 상지 회전력 값을 실험측정하였다. 본 연구 결과를 보면 다음과 같다. 첫째, 핸드바이크 등받이 각도 중 상지회전력에서 최대근력이 등받이 50도일때가 가장 높았고, 근지구력은 등받이 80도 일때가 가장 높았다. 이는 엎드린 자세 즉 K-Tybe 핸드바이크가 가장 속도가 높을거라고 주관적으로 생각되었지만 바람의 저항이 등받이가 낮을수록 속도와 효율성이 영향을 미치는 것으로 나타났다. 둘째, 핸드바이크 손잡이 타입 중 수평(0도)손잡이, 수직(90도)손잡이, 45도 손잡이 중 45도 손잡이가 가장 회전력 값이 높았다. 이는 수관절, 주관절, 견관절 등이 골고루 힘이 분배되어 회전력이 발생하는 것으로 나타났다. 셋째, 핸드바이크 크랭크축과 가슴명치와의 거리(35cm, 45cm, 55cm)중 45cm가 회전력이 가장 효율적으로 발생되는 것으로 나타났다. 이는 핸드바이크 핸들링 시에 나타나는 중력에 영향과 피로감이 영향을 받는 것으로 나타났다. Based on upper limb torque by different angles of a back, distance between crank axis and chest and angles of hand-grips, this research is to develop variable hand bikes. By doing so, it is to offer guidance for its design. For this research three normal persons took part in the experiment. Results are as follows. First, upper limb torque was found to be the highest at 50 degree of a back and muscle endurance was shown to be the highest at 80 degree of a back. It means that as a back of a chair gets lower the speed and efficiency becomes better, which contradicts the subjective fact that K-type hand bikes would show the highest speed. Second, among types of grips of hand bikes 45 degree ones have been shown to be the ones with the highest torque. This is due to proper distribution of power of joints in arms, elbows, and shoulders. Third, in case of distance of 45cm between crank axis and chest, it has shown the most efficient torque. This is because of the effect of gravity and exhaustion when handling.
변형률에 따른 AZ31 합금의 변형율 속도 민감도 지수 변화와 미세조직 특성에 관한 연구
김동옥(D. O. Kim),강찬우(C. W. Kang),이수연(S. Y. Lee) 한국소성가공학회 2011 한국소성가공학회 학술대회 논문집 Vol.2011 No.10
Strain rate sensitivity index, m plays an important role in plastic deformation at elevated temperature. It is affected by strain rate, temperature, and the microstructure of material. The strain rate sensitivity index has been used as a constant for numerical analysis of plastic forming in specified strain rate and temperature. However, the m is varied as the deformation proceeds at an elevated temperature and a certain strain rate. Thus, in this present study, the m has been characterized for the amount of strain by multiple tensile jump tests of AZ31 magnesium alloy, and the variation of m has been discussed with the microstructural observation before and after the deformation. The experimental results show that the variation of m is dependent on the temperature and strain rate, and grain growth with dynamic recrystallization affect the variation of m.
HTML5를 이용한 청각장애인의 u-Learning 기반 IT 직업 교육 콘텐츠 개발에 관한 연구
김동옥(D. O. Kim),김소영(S. Y. Kim),이근민(K. M. Rhee),정주석(J. S. Jeong) 한국재활복지공학회 2012 한국재활복지공학회 학술대회논문집 Vol.2012 No.11
본 연구는 언제어디서든 학습이 가능한 u-Learning 접근방법은 웹과 모바일기기를 상호호환 가능한 동시에, 안드로이드와 Mac OS, PC 등 모든 모바일 기기에서 호환이 용이하도록 HTML5을 이용하여 청각장애인의 IT 교육 콘텐츠를 개발하였다. 개발된 Flash와 HTML5 콘텐츠 툴의 장단점을 비교해 볼 수 있었다. 또한 u-Learning 기반 청각장애인 IT 교육과정인 HTML JAVA Script, JSP, Oracle 콘텐츠 개발을 통해 청각장애의 교육환경이 테크놀로지의 발달로 점차적으로 장애인의 학습 지원이 가능해질 것이다.