http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Free vibration analysis of angle-ply laminated composite and soft core sandwich plates
Meriem Sahla,Hayat Saidi,Kada Draiche,Abdelmoumen Anis Bousahla,Fouad Bourada,Abdelouahed Tounsi 국제구조공학회 2019 Steel and Composite Structures, An International J Vol.33 No.5
In this work, a simple four-variable trigonometric shear deformation model with undetermined integral terms to consider the influences of transverse shear deformation is applied for the dynamic analysis of anti-symmetric laminated composite and soft core sandwich plates. Unlike the existing higher order theories, the current one contains only four unknowns. The equations of motion are obtained using the principle of virtual work. The analytical solution is determined by solving the eigenvalue problem. The influences of geometric ratio, modular ratio and fibre angle are critically evaluated for different problems of laminated composite and sandwich plates. The eigenfrequencies obtained using the current theory are verified by comparing the results with those of other theories and with the exact elasticity solution, if any.
On thermal stability of plates with functionally graded coefficient of thermal expansion
Abdelmoumen Anis Bousahla,Samir Benyoucef,Abdelouahed Tounsi,S.R. Mahmoud 국제구조공학회 2016 Structural Engineering and Mechanics, An Int'l Jou Vol.60 No.2
In this article, a four-variable refined plate theory is presented for buckling analysis of functionally graded plates subjected to uniform, linear and non-linear temperature rises across the thickness direction. The theory accounts for parabolic distribution of the transverse shear strains, and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factor. Young’s modulus and Poisson ratio of the FGM plates are assumed to remain constant throughout the entire plate. However, the coefficient of thermal expansion of the FGM plate varies according to a power law form through the thickness coordinate. Equilibrium and stability equations are derived based on the present theory. The influences of many plate parameters on buckling temperature difference such ratio of thermal expansion, aspect ratio, side-to-thickness ratio and gradient index will be investigated.
Abdelmoumen Anis Bousahla,Fouad Bourada,S.R. Mahmoud,Abdeldjebbar Tounsi,Ali Algarni,E.A. Adda Bedia,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.2
In this work, the buckling and vibrational behavior of the composite beam armed with single-walled carbon nanotubes (SW-CNT) resting on Winkler-Pasternak elastic foundation are investigated. The CNT-RC beam is modeled by a novel integral first order shear deformation theory. The current theory contains three variables and uses the shear correction factors. The equivalent properties of the CNT-RC beam are computed using the mixture rule. The equations of motion are derived and resolved by Applying the Hamilton’s principle and Navier solution on the current model. The accuracy of the current model is verified by comparison studies with others models found in the literature. Also, several parametric studies and their discussions are presented.
Salah Refrafi,Abdelmoumen Anis Bousahla,Abdelhakim Bouhadra,Abderrahmane Menasria,Fouad Bourada,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.4
In this research work, the hygrothermal and mechanical buckling responses of simply supported FG sandwich plate seated on Winkler-Pasternak elastic foundation are investigated using a novel shear deformation theory. The current model take into consideration the shear deformation effects and ensures the zero shear stresses on the free surfaces of the FG-sandwich plate without requiring the correction factors “Ks”. The material properties of the faces sheets of the FG-sandwich plate are assumed varies as power law function “P-FGM” and the core is isotropic (purely ceramic). From the virtual work principle, the stability equations are deduced and resolved via Navier model. The hygrothermal effects are considered varies as a nonlinear, linear and uniform distribution across the thickness of the FG-sandwich plate. To check and confirm the accuracy of the current model, a several comparison has been made with other models found in the literature. The effects the temperature, moisture concentration, parameters of elastic foundation, side-to-thickness ratio, aspect ratio and the inhomogeneity parameter on the critical buckling of FG sandwich plates are also investigated.
Attia, Amina,Bousahla, Abdelmoumen Anis,Tounsi, Abdelouahed,Mahmoud, S.R.,Alwabli, Afaf S. Techno-Press 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.65 No.4
In this paper, an efficient higher-order shear deformation theory is presented to analyze thermomechanical bending of temperature-dependent functionally graded (FG) plates resting on an elastic foundation. Further simplifying supposition are made to the conventional HSDT so that the number of unknowns is reduced, significantly facilitating engineering analysis. These theory account for hyperbolic distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Nonlinear thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from the principle of virtual displacements. Analytical solutions for the thermomechanical bending analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier's method). Non-dimensional results are compared for temperature-dependent FG plates and validated with those of other shear deformation theories. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature field on the thermomechanical bending characteristics. It can be concluded that the present theory is not only accurate but also simple in predicting the thermomechanical bending responses of temperature-dependent FG plates.
A new nonlocal HSDT for analysis of stability of single layer graphene sheet
Bouadi, Abed,Bousahla, Abdelmoumen Anis,Houari, Mohammed Sid Ahmed,Heireche, Houari,Tounsi, Abdelouahed Techno-Press 2018 Advances in nano research Vol.6 No.2
A new nonlocal higher order shear deformation theory (HSDT) is developed for buckling properties of single graphene sheet. The proposed nonlocal HSDT contains a new displacement field which incorporates undetermined integral terms and contains only two variables. The length scale parameter is considered in the present formulation by employing the nonlocal differential constitutive relations of Eringen. Closed-form solutions for critical buckling forces of the graphene sheets are obtained. Nonlocal elasticity theories are used to bring out the small scale influence on the critical buckling force of graphene sheets. Influences of length scale parameter, length, thickness of the graphene sheets and shear deformation on the critical buckling force have been examined.
Amina Attia,Abdelmoumen Anis Bousahla,Abdelouahed Tounsi,S. R. Mahmoud,Afaf S. Alwabli 국제구조공학회 2018 Structural Engineering and Mechanics, An Int'l Jou Vol.65 No.4
In this paper, an efficient higher-order shear deformation theory is presented to analyze thermomechanical bending of temperature-dependent functionally graded (FG) plates resting on an elastic foundation. Further simplifying supposition are made to the conventional HSDT so that the number of unknowns is reduced, significantly facilitating engineering analysis. These theory account for hyperbolic distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Nonlinear thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from the principle of virtual displacements. Analytical solutions for the thermomechanical bending analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier’s method). Non-dimensional results are compared for temperature-dependent FG plates and validated with those of other shear deformation theories. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature field on the thermomechanical bending characteristics. It can be concluded that the present theory is not only accurate but also simple in predicting the thermomechanical bending responses of temperature-dependent FG plates.
Stability and dynamic analyses of SW-CNT reinforced concrete beam resting on elastic-foundation
Fouad Bourada,Abdelmoumen Anis Bousahla,Abdeldjebbar Tounsi,E.A. Adda Bedia,S.R. Mahmoud,Kouider Halim Benrahou,Abdelouahed Tounsi 사단법인 한국계산역학회 2020 Computers and Concrete, An International Journal Vol.25 No.6
This paper, presents the dynamic and stability analysis of the simply supported single walled Carbon Nanotubes (SWCNT) reinforced concrete beam on elastic-foundation using an integral first-order shear deformation beam theory. The condition of the zero shear-stress on the free surfaces of the beam is ensured by the introduction of the shear correction factors. The SWCNT reinforcement is considered to be uniform and variable according to the X, O and V forms through the thickness of the concrete beam. The effective properties of the reinforced concrete beam are calculated by employing the rule of mixture. The analytical solutions of the buckling and free vibrational behaviors are derived via Hamilton’s principle and Navier method. The analytical results of the critical buckling loads and frequency parameters of the SWCNT-RC beam are presented in the form of explicit tables and graphs. Also the diverse parameters influencing the dynamic and stability behaviors of the reinforced concrete beam are discussed in detail.
Nassira Djilali1,Abdelmoumen Anis Bousahla,Abdelhakim Kaci,Mahmoud M. Selim,Fouad Bourada,Abdeldjebbar Tounsi,Abdelouahed Tounsi,Kouider Halim Benrahou,S. R. Mahmoud 국제구조공학회 2022 Steel and Composite Structures, An International J Vol.42 No.6
This work presents a non-linear cylindrical bending analysis of functionally graded plate reinforced by singlewalled carbon nanotubes (SWCNTs) in thermal environment using a simple integral higher-order shear deformation theory (HSDT). This theory does not require shear correction factors and the transverse shear stresses vary parabolically through the thickness. The material properties of SWCNTs are assumed to be temperature-dependent and are obtained from molecular dynamics simulations. The material properties of functionally graded carbon nanotube-reinforced composites (FG-CNTCRs) are considered to be graded in the thickness direction, and are estimated through a micromechanical model. The non-linear strain–displacement relations in the Von Karman sense are used to study the effect of geometric non-linearity and the solution is obtained by minimization of the total potential energy. The numerical illustrations concern the nonlinear bending response of FG-CNTRC plates under different sets of thermal environmental conditions, from which results for uniformly distributed CNTRC plates are obtained as benchmarks.
Kada Draiche,Abdelmoumen Anis Bousahla,Abdelouahed Tounsi,Afaf S. Alwabli,Abdeldjebbar Tounsi,S.R. Mahmoud 사단법인 한국계산역학회 2019 Computers and Concrete, An International Journal Vol.24 No.4
This paper aims to present an analytical model to predict the static analysis of laminated reinforced composite plates subjected to sinusoidal and uniform loads by using a simple first-order shear deformation theory (SFSDT). The most important aspect of the present theory is that unlike the conventional FSDT, the proposed model contains only four unknown variables. This is due to the fact that the inplane displacement field is selected according to an undetermined integral component in order to reduce the number of unknowns. The governing differential equations are derived by employing the static version of principle of virtual work and solved by applying Navier’s solution procedure. The non-dimensional displacements and stresses of simply supported antisymmetric cross-ply and angle-ply laminated plates are presented and compared with the exact 3D solutions and those computed using other plate theories to demonstrate the accuracy and efficiency of the present theory. It is found from these comparisons that the numerical results provided by the present model are in close agreement with those obtained by using the conventional FSDT.