http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
거버너샤프트 교차구멍 내경의 전해디버링 특성에 관한 연구
최인휴,김정두,Choi, In-Hyu,Kim, Jeong-Du 대한기계학회 1997 大韓機械學會論文集A Vol.21 No.12
Recently burr technology is rising in the fields of the precision manufacturing and the high quality machining, deburring has treated as a difficult problem on going to the high efficiency, automation in the FMS. Removal of burr with various shapes, dimensions and properties couldn't be standardized and has depended on manual treatment. Especially, deburring for cross hole inside owing to passing through out perpendicular to a main hole is more difficult, the electrochemical method is proper as its solution at practical aspects. Burr elimination in the cross hole drilling of governor shaft used in the automobile engine so far has been worked by a manual post-processing by a skillful worker, which becomes a factor of productivity-down and cost-up so that improvement of machining process is needed. Therefore, for the high efficiency and automation of internal deburring in the cross hole, development of electrochemical deburring technology is needed. So, the new process in the burr treatment is supposed. In this study, characteristics of electrochemical deburring through experiments were identified and factors such as electrolytic gap and electorlytic fluid contributed to removal burr height were analyzed. Also, deburring efficiency and electrolytic performance for cross hole were examined according to electrolytic current and electrochemical deburring condition corresponding to acquired edge quality was found out.
Stage-Scanner 연동 레이저 가공에서 고속가공 오차보정에 관한 연구
이철수(Cheol-soo Lee),최용찬(Yong-chan Choi),김종민(Jong-min Kim),허은영(Eun-young Huh),최인휴(In-hyu Choi) (사)한국CDE학회 2012 한국 CAD/CAM 학회 학술발표회 논문집 Vol.2012 No.2
레이저를 이용한 고속가공과 대면적 처리는 품질 향상과 빠른 납기를 위한 중요한 이슈로 많은 연구가 이루어 지고 있다. scanner-stage 연동 레이저 가공은 기존의 스텝&스캔(step & scan)연동방식의 단점인 스텝 경계면 에서의 정밀도 확보와 가공시간 단축이라는 장점이 있다. 그러나 실제 가공에 있어서는 여러가지 이유로 오차가 발생하여 가공정밀도를 저하시키는 원인이 되고 있다. 따라서 본 연구에서는 우선 건트리형 고속 레이저 가공기에서 발생하는 오차요소들을 정리하고, on-the fly 방식의 Scanner-Stage 스테이지 동기 고속가공기의 오차를 줄이기 위한 방법을 제시하려한다.