http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
신경회로망을 이용한 터빈로타 디스크 키웨이의 결함 검출
이병우,이종오,윤운하,이병우,서원찬,이종규 한국비파괴검사학회 2003 한국비파괴검사학회지 Vol.23 No.1
최근 터빈 로타 디스크 키웨이에서 많은 응력부식균열이 발견되었으며, 터빈설비의 중대한 파손을 예방하기 위해 이러한 균열은 조기에 검출 및 평가되어야 한다. 본 연구에서는 초음파탐상의 RF(radio frequency) 신호를 역전파 알고리즘에 근거한 신경회로망에 적용하여 키웨이 주변의 균열에 대한 위치, 크기 및 방향성을 평가하였다. 각 반사영역에서 수신된 여러개의 피크로 나타나는 RF 신호를 각 반사영역에 대해 하나의 최대 피크를 가지도록 처리한 후, 트랜스듀서의 위치 정보와 각 반사파의 도달시간이 들어있는 주사 데이터를 작성하였다. 이 주사 데이터로부터 각 반사영역 사이의 시간차이와 트랜스듀서의 위치 정보를 신경회로망에 적용한 결과 키웨이에서 시작된 균열의 위치, 크기 및 방향성을 평가하는데 유용함을 알 수 있었다. A number of stress corrosion cracks in turbine rotor disk keyway in power plants have been found and the necessity has been raised to detect and evaluate the cracks prior to the catastrophic failure of turbine disk. By ultrasonic RF signal analysis and using a neural network based on back-propagation algorithm, we tried to evaluate the location, size and orientation of cracks around keyway. Because RF signals received from each reflector have a number of peaks, they were processed to have a single peak for each reflector. Using the processed RF signals, scan data that contain the information on the position of transducer and the arrival time of reflected waves from each reflector were obtained. The time difference between each reflector and the position of transducer extracted from the scan data were then applied to the back-propagation neural network. As a result, the neural network was found useful to evaluate the location, size and orientation of cracks initiated from keyway.
Fe-XAl-0.1Y(X =5, 10, 14 wt.%) 합금의 고온 산화거동
이병우,서원찬,박찬,Lee, Byung-Woo,Seo, Won-Chan,Park, Chan 한국재료학회 2003 한국재료학회지 Vol.13 No.12
The oxidation behaviour of Fe-XAl-0.1Y(X= 5, 10, 14 wt.%) alloys were investigated at 1073, 1173 and 1273 K in oxygen/ nitrogen gas atmosphere for 1∼24 hrs using SEM/EDX, XRD and EPMA. The weight changes of Fe-XAl-0.1Y alloys followed the parabolic rate law. Oxidation rates of 10Al and 14Al alloys were ten times lower than that of 5Al alloys. This is attributed to the formations of protective $A1_2$$O_3$oxides on the surface of 10Al and 14Al alloys. The oxidation product scales of the 5Al alloy showed that thick iron oxide scales($Fe_2$$O_3$, $Fe_3$$O_4$) containing porosities formed during early stages of oxidation. With continued oxidation, aluminum oxide was formed at the alloy/scale interface.
미국의 철강 세이프가드 조치에 대한 WTO 분쟁 해결 사건
이병우 한국국제경제법학회 2005 국제경제법연구 Vol.3 No.-
미국의 철강 세이프가드 조치에 대해서 한국, EU, 둥 대미 철강 수출국이 제기한 WTO 분쟁해결 패널은 미국의 세이프가드 조치는 1)수입의 급격한 증가 (increased imports)가 없었고, 2)미국이 세이프가드 조치를 발통하면서 아시아 경제 위기 등 예기되지 못한 사태(unforeseen developments)에 대한 적절한 설명을 하지 않았으며, 3)피해 조사 대상국과 조치 대상국간의 형평성 즉, 병행주의(parallelism)를 위반하여 WTO 세이프가드 협정이 요구하는 기본적인 요건을 충족하지 않았으므로 미국의 조치를 WTO 세이프가드 협정 위반으로 판정하였다. 본 논문은 미국이 위반한 세가지 쟁점에 대한판정 논리에 대해서 분석 함과 동시에 패널 보고서가 내포하고 있는 문제점으로 패널이 의견을 제시하지 않은 이중 규제, 계량화 등 주요 이슈를 제시하였다. The Dispute Settlement Panel under the WTO Dispute Settlement Understanding(DSU) on the U.S. Steel Safeguard measures found that the U.S. steel safeguard measures were inconsistent with the WTO Safeguards Agreement primarily in that the U.S. failed to satisfy a few principle requirement in the GATT/WTO agreement: 1)that imports in steel in the U.S. did not increase, 2)that U.S. did not provide a definite explanation on unforeseen developments led by Asian economic crisis, etc. 3)that the imbalance between the scope of country in the injury investigation and the scope of the country subject to the imposition of safeguard measures led to an breach of parallelism. This article tries to analyze the three major issues in the panel report and simultaneously points out that the panel which sets aside its opinion on those important issues like double jeopardy and quantification fails to provide proper guidelines in implementing the WTO safeguard agreement in the future.