http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
안상준(Sangjun Ahn),신동천(Dongcheon Shin) 한국전자거래학회 2019 한국전자거래학회지 Vol.24 No.2
통신 인프라 구축과 최적화를 위해서는 각 구성 요소들의 연관성을 고려할 필요가 있다. 본 논문에서는 최적화된 통신 인프라 구축을 위해 필요한 주요 고려사항을 바탕으로 성능이 향상된 MACSec 기반의 통신 인프라 구성 방안을 제시한다. 제안된 MACSec 기반 기술은 통신 인프라를 처음부터 다시 설계하지 않고 IPSec 기술을 별도의 장비를 추가하지 않고 대체할 수 있다. 아울러, 구성 시 주요 고려사항인 메시지 오버헤드와 암호화 처리 성능, 그리고 이동성 측면에서 실험을 통해 IPSec과 성능을 평가한다. 시험 결과에 따르면 MACSec으로 구현된 암호화 네트워크에서 IPSec보다 Hop 지연과 메시지 오버헤드와 같은 일반적 성능뿐만 아니라 연결 지점 변경 시험을 통해 이동성 성능이 우위에 있다. It is essential to consider the relationships between each component in the communication infrastructure in order to build and optimize the infrastructure. In this paper, based on the major factors to consider for the optimized communication infrastructure, we propose an enhanced MACSec-based deployment mechanism for communication infrastructure. The proposed MACSec mechanism can replace the IPSec without the additional devices and redesign of the communication infrastructure. In addition, we evaluate the performance of MACSec and IPSec in terms of the major factors such as message overhead, encryption processing, and host mobility. According to the evaluation results, we can say that MACSec is superior to IPSec with regard to mobility as well as hop delay and message overhead.
임병수(Byoungsoo Lim),안상준(Sangjun Ahn),김재헌(Jaeheon Kim),강구태(Kootae Kang) 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
Gasoline Direct Injection(GDI) Engines require a high pressure fuel system, i.e. high pressure fuel pump, injectors, fuel rail and high pressure line, in order to enable the injection of fuel directly into the combustion chambers. But high pressure fuel system emits an unpleasant noise during normal operation, particularly at engine idle. This paper focuses on how to reduce the acoustic noise caused by the individual high pressure fuel system using the S/W and H/W methods.
플라즈마에 의한 평형 유동을 고려한 스파크제트 액츄에이터 유동 해석 프로그램 개발과 추력 특성 연구
김형진(Hyung-Jin Kim),신진영(Jin Young Shin),채정헌(Jeongheon Chae),안상준(Sangjun Ahn),김규홍(Kyu Hong Kim) 한국항공우주학회 2019 韓國航空宇宙學會誌 Vol.47 No.2
스파크제트 액츄에이터는 플라즈마 합성 제트 액츄에이터(plasma synthetic jet actuator, PSJA)라고도 불리는 능동 유동 제어 장치로, 초음속 유동의 제어 가능성이 있어 많은 연구가 진행 중이다. 이 액츄에이터는 아크 플라즈마를 이용해 캐비티(cavity) 내부에 에너지를 주입하여 온도와 압력을 상승시킨다. 온도와 압력이 상승한 캐비티에서 오리피스(orifice)를 통해 압력파와 제트가 분출되어 외부 유동에 교란을 준다. 플라즈마의 영향으로 캐비티 유동은 고온, 고압의 평형 유동이 되기 때문에 스파크제트 액츄에이터의 유동 해석을 위해선 공기의 평형 상태를 고려해야 한다. 본 연구에서는 평형 유동의 특성을 고려하여 스파크제트 액츄에이터 유동 해석을 위한 수치해석 프로그램을 개발했다. 개발된 프로그램의 검증으로 문헌에서 얻을 수 있는 실험 결과와 시간에 따른 제트의 위치를 비교했다. 또한 상온, 상압의 무풍에서 액츄에이터의 추력 특성을 분석했다. Sparkjet actuator, also known as plasma synthetic jet actuator (PSJA), is an active flow control device that has possibility of controling supersonic flow. This actuator utilizes arc plasma to deposit energy onto the gas inside the cavity to raise temperature and pressure. A change in the state of the fluid inside the cavity generates pressure waves and momentum jet, and they are exhausted through out the orifice exit and disturb external flow field. Since the cavity flow is affected by arc plasma, which is an equilibrium plasma and have generated equilibrium flow, the equilibrium state of air should be considered in order to analyze the flow of sparkjet actuator. In this study, numerical program for equilibrium flow was developed for the use of sparkjet actuator analysis. The developed program was validated by comparing the time – accurate jet front positions with the reference result. Then, impulse characteristics of the actuator in the atmospheric quiescent air were explained.