http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
솔나방(Dendrolimus spectabilis Butler) 종령유충(終齡幼蟲)의 타액선(唾液腺)에 관한 미세구조적(微細構造的) 연구(硏究)
백승범,문명진,김우갑,Baek, Seung-Bum,Moon, Myung-Jin,Kim, Woo-Kap 한국현미경학회 1988 Applied microscopy Vol.18 No.2
The fine structure of the salivary glands of the pine moth, Dendrolimus spectabilis Butler, at the last larval period is observed using light and electron microscopes. The moths have single paired tubular salivary glands which openings are connected to the oral cavity through the upper jaw. By the external morphology and its functions, the glands are subdivided into three regions which are anterior reabsorptive region, middle storage region and posterior secretory region. Along the inner canal of the salivary gland two columns of the large glandular cells are connected each other and oriented to ring-like forms. By this cellular orientation, the glands have long and large tubular structure. From anterior to posterior region large nuclei of the glands are ramified like twigs of the tree, and in the cytoplasm of the cell numerous mitochondria and vacuoles are seen. Moreover, basal plasma membranes of the gland cells are heavily infolded. The anterior region of the glands keeps several characteristics related to the reabsorption of the material from the inner cavity to the glandular cells whereas, main salivary material is synthesized and secreted through the long and convoluted posterior region. The apical plasma membranes of the cells are the most heavily invaginated at the posterior regoin, but trachea and tracheoles are distributed only at the middle and posterior regions. In the cytoplasm of the middle region Golgi complexes appeared at the vicinity of the vesicles, and at the posterior region of the salivary glands multivesicular bodies are also observed.
자동차 부품 BRACKET의 Checking Fixture 검사구 개발
백승범(Seung-Bum Baek),유만희(Man-Hee You),김상오(Sang-Oh Kim),곽재섭(Jae-Seob Kwak),하만경(Man-Kyung Ha) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6월
It is impossible to check the product during manufacturing process by using previous measuring method. However checking fixture can do that and save the working time and cost. In this study, checking fixture was developed through the 3D modeling, CNC manufacturing process, precision geometry test. Gap of 3mm was adopted to reduce the deformation of product. Optimized tool parameter was determined as 1500rpm of tool speed, 2000mm/min of feed speed and 1500rpm of shaft spindle speed by using NC software.
자동차 부품 BRACKET의 Checking Fixture 검사구 개발
백승범(Seung-Bum Baek),유만희(Man-Hee You),김상오(Sang-Oh Kim),곽재섭(Jae-Seob Kwak),하만경(Man-Kyung Ha) 한국기계가공학회 2009 한국기계가공학회 춘추계학술대회 논문집 Vol.2009 No.6
It is impossible to check the product during manufacturing process by using previous measuring method. However checking fixture can do that and save the working time and cost. In this study, checking fixture was developed through the 3D modeling, CNC manufacturing process, precision geometry test. Gap of 3mm was adopted to reduce the deformation of product. Optimized tool parameter was determined as 1500rpm of tool speed, 2000㎜/min of feed speed and 1500rpm of shaft spindle speed by using NC software.
난수 발생기의 무작위성 향상을 위한 Discarding 기반 후 처리 회로의 RTL 설계
김재우(Jae-Woo Kim),백승범(Seung-Bum Baek),잔 타잉 안(Thanh-An Tran),홍종필(Jong-Phil Hong) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.6
본 논문은 난수 발생기의 무작위성을 향상시켜, NIST(National Institute of Standards and Technology)에서 제공하는 검증 방법인 800-22a의 테스트를 통과하기 위한 Discarding 기반 후처리 기법을 제안한다. 제안하는 회로는 CMOS Samsung-65nm 공정을 활용하여, RTL(Registor Transistor Logic)으로 설계되었다. Discarding 기반 후처리 기법을 적용한 이후 테스트 가능한 난수 발생기의 비트수는 약 40% 감소하였다. 하지만, 15개의 테스트 군 중에서 1×10<SUP>8</SUP> Bits 이상을 필요로 하는 테스트를 제외한 12개의 테스트 군을 모두 만족하였다.
박인숙(In-Sook Park),김용수(Yong-Soo Kim),백승범(Seung-Bum Baek),김애영(Ae-Young Kim),최성희(Sung-Hee Choi),이영자(Young-Ja Lee),전대훈(Dae-hoon Jeon),김형일(Hyoung-Il Kim),하상도(Sang-Do Ha) 한국식품과학회 2009 한국식품과학회지 Vol.41 No.2
식품 및 식품접촉 표면의 식중독균을 제어하기 위해 오존수를 사용하는 사례가 증가하고 있다. 본 연구는 HDPE 도마와 나무 도마에 오염된 식중독균 제거를 위해 오존수 처리의 살균효과를 평가하였다. E. coli O157:H7, S. aureus, S. Typhimurium, B. cereus 모두 오염원 도마 표면을 오존수로 처리 시 농도 증가에 따른 1-5 log의 살균력이 관찰되었고, 세척보다는 침지 처리가 살균력이 높았다(p < 0.05). E. coli O157:H7, S. Typhimurium 등 그람 음성균이 S. aureus, B. cereus 등 그람양성균보다 오존수에 대한 저항성이 낮았으며, 나무도마보다 HDPE 도마에서 더 높은 살균력을 보였다. 본 연구 결과는 식품가공공장의 식품접촉 표면 식중독 미생물 제어에 효과적으로 활용될 것이다. The efficacy of ozone water in reducing food-borne pathogenic bacteria on High Density Polyethylene (HDPE) and wooden chopping boards in food industry was investigated in this study. 1-5 log reductions of E. coli O157:H7, S. aureus, S. Typhimurium, and B. cereus were observed with increasing concentrations of ozone water. The immersion treatment evidenced superior capability to inactivate food-borne pathogens than washing treatment. The Gram-negative bacteria, such as E. coli O157:H7 and S. Typhimurium, evidenced lower resistance against ozone water than was seen with the grampositive bacteria, which included S. aureus and B. cereus. The sterilizing effects of ozone water on HDPE chopping boards was superior to that on wooden boards. This result might be utilized to remove food-borne pathogens from food contact surfaces in the food industry.
CMOS 공정을 이용한 링 오실레이터 기반 진성 난수 생성 회로 설계
김재우(Jae-Woo Kim),최강운(Kang-Un Choi),백승범(Seung-Bum Baek),홍종필(Jong-Phil Hong) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.2
본 논문은 IoT 장치와 같은 경량 기기를 위한 보안 시스템에 적용 가능한 링 오실레이터(Ring Oscillator) 기반의 진성 난수 생성기(TRNG)를 설계하였다. 제안된 난수 생성기는 65nm CMOS 공정을 이용해 설계되었으며, 동작 전압 1.2V, 비트레이트 3Gb/s 및 에너지 소모율 0.054pJ/bit을 갖는다.