http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
그물형 안테나의 고어 개수에 따른 Radio Frequency (RF) 특성 분석
김진혁,이시아,박태용,최한솔,김홍래,채봉건,오현웅,Kim, Jin-Hyuk,Lee, Si-A,Park, Tae-Yong,Choi, Han-Sol,Kim, Hongrae,Chae, Bong-Geon,Oh, Hyun-Ung 한국우주과학회 2021 우주기술과 응용 Vol.1 No.3
본 논문에서는 초소형 위성에 적용할 수 있는 전개형 메쉬 안테나의 Gore 특성에 따른 radio frequency (RF) 특성 변화에 관해 논한다. 메쉬 안테나의 경우 다양한 초소형위성에 탑재할 수 있으며, 통신/영상레이다/SIGINT 등 다양한 우주임무에 활용이 가능하다. 이상적인 안테나 곡면을 형성하기 위해서는 충분한 개수의 안테나 Rib 구조로 반사판을 구현해야 한다. 그러나 안테나 Rib 개수 증가에 따라 안테나 질량을 비롯해 기계적인 전개 메커니즘의 복잡도 및 전개 신뢰성 등 다양한 설계인자에 영향을 미치게 된다. 본 논문에서는 안테나의 RF 성능 열화 최소화 관점에서 적정 안테나 Rib의 개수를 도출하기 위해 메쉬 안테나의 예시 모델을 대상으로 다양한 Rib 개수에 따른 RF 시뮬레이션을 통해 비교분석을 수행하였다. This research discusses the change in radio frequency (RF) characteristics according to the number of Gores on the deployable mesh antennas for potential micro-satellite applications. The deployable type of lightweight mesh antenna can be used for various space missions such as communication/SAR/ SIGINT. In order to implement an ideal curvature of antenna surface, sufficient number of antenna rib structures are required. However, the increase in antenna ribs affects various design factors of the antenna system, especially total system mass, complexity of deployable mechanism and reliability. In this paper, the proper number of ribs for the mesh antenna were derived by comparison of electro-magnetic (EM) simulation results of example of antenna model in accordance with the various number of ribs.
김진혁(Jin-Hyuk Kim),최재호(Jae-Ho Choi),김광용(Kwang-Yong Kim) 한국유체기계학회 2008 유체기계 연구개발 발표회 논문집 Vol.2008 No.-
In this paper, shape optimization based on three-dimensional flow analysis has been performed for impeller design of centrifugal compressor. To evaluate the objective function of an isentropic efficiency, Reynolds-averaged Navier-Stokes equations are solved with SST (Shear Stress Transport) turbulence model. The governing equations are discretized by finite volume approximations. The optimization techniques based on the radial basis neural network method are used for the optimization. Latin hypercube sampling as design of experiments is used to generate thirty design points within design space. Sequential quadratic programming is used to search the optimal point based on the radial basis neural network model. Four geometrical variables concerning impeller shape are selected as design variables. The results show that the isentropic efficiency is enhanced effectively from the shape optimization by the radial basis neural network method.
분절간 척추경 나사못 고정을 이용하여 후방 교정술로만 치료한 70도 이상의 고도 청소년기 특발성 척추 측만증
김진혁(Jin-Hyok Kim),석세일(Se-Il Suk),안종국(Jong-Kuk Ahn),김성수(Sung-Soo Kim),정국진(Kook-Jin Chung),임동주(Dong-Ju Lim),성기혁(Ki-Hyuk Sung) 대한정형외과학회 2006 대한정형외과학회지 Vol.41 No.1
목적: 분절간 척추경 나사못의 강력한 교정력은 고도의 청소년기 특발성 척추 측만증 환자에서 전방 수술이 필요하지 않을 수 있다는 주장을 확인하고자 분절간 척추경 나사못 고정을 이용하여 후방 교정술만으로 치료한 70도 이상의 청소년기 특발성 척추 측만증의 결과를 평가하고자 하였다. 대상 및 방법: 분절간 척추경 나사못을 이용하여 후방 술식만으로 치료하고 최소 2년 이상(2-7.8년) 추시 관찰 가능했던 70도 이상의 청소년기 특발성 척추 측만증 환자 23명을 후향적으로 분석하였다. 여자가 19명, 남자가 4명이었고 평균 나이는 14.9세였다. 술전 70도 이상의(70-96도) 흉추 만곡을 가진 환자는 19명이었으며 70도 이상의(70꺼도) 요추 만곡을 가진 환자는 4명이었다. King Ⅰ형의 4명을 제외한 환자는 모두 흉추 만곡 유합술로 치료하였다. 방사선학적 측정은 술전 및 술후 기립 방사선 사진을 이용하였다. 결과: 술전 79.5±9.1도의 흉추 만곡은 최종 추시에서 25.3±5.8도로 교정되어 67.9±7.8%의 교정률을 보였고 술후 추시 관찰상 2.5±1.9%의 교정 소실을 보였다. 술전 72.3±3.3도의 요추 만곡은 최종 추시에서 30.0±10.1도로 교정되어 58.4±14.8%의 교정률을 보였고 술후 추시 관찰상 2.4±2.5%의 교정 소설을 보였다. 술전 30±7.4도의 최하위 기기 고정된 추체 경사각은 술후 10.5±5.6도를 보여 64.8±20.9%의 교정을 보였다. 흉추 후만각은 술전 평균 28.3±11.2도(0-50도)에서 술후 평균 35.0±9.1도(22-53도)로 호전되었다. 모든 환자는 최종 추시상 척추경 나사못과 관련된 합병증은 없었으며, 유합 부위에서 불유합의 소견은 없었다. 결론: 70도 이상의 청소년기 특발성 척추 측만증 치료에서 전방 유리술 없이 분절간 척추경 나사못 고정만으로 만족스러운 교정 및 유지를 얻을 수 있었다. 이러한 분절간 척추경 나사못을 이용한 후방 교정술과 유합술은 고도의 청소년기 특발성 척추 측만증의 수술적 치료로 전방 유리술이 필요하지 않게 하여 전방 수술과 관련된 합병증이 발생하지 않게 해주었다. Purpose: To evaluate the results of a posterior procedure with segmental pedicle screw fixation in severe adolescent idiopathic scoliosis ≥ 70°. Materials and Methods: Twenty-three adolescent idiopathic patients with a curve magnitude ≥ 70° subject to segmental pedicle screw fixation were analyzed retrospectively with a minimum follow-up of 2 years (2-7.8 years). There were 19 females and 4 males with a mean age of 14.9 years. All patients, except for 4 patients with King type Ⅰ, were subjected to thoracic curve fusion. Twenty patients showed a thoracic curve ≥70° (70-96), and 4 patients had a lumbar curve ≥70° (70-77), preoperatively. The preoperative and postoperative standing roentgenograms were used to check the radiological parameters. Results: The mean preoperative thoracic curve was corrected from 79.5±9.1° to 25.3±5.8° at the most recent follow-up, showing a correction of 67.9±7.8% and loss of correction of 2.5±1.9%. The mean preoperative lumbar curve was corrected from 72.3±3.3° to 30.0±10.1° at the most recent follow-up (58.4±14.8% curve correction, 2.4±2.5% loss of curve correction). The mean preoperative lowest instrumented vertebral tilting was corrected from 30.0±7.4° to 10.5±5.6°, showing a correction of 64.8 ± 20.9%. The preoperative thoracic kyphosis improved from 28.3 ± 11.2° (0-50°) to 35.0±9.1° (22-53°) postoperatively. There was neither pseudoarthrosis nor complications related to the pedicle screws at the most recent follow-up. Conclusion: Segmental pedicle screw fixation without an anterior release procedure in severe adolescent idiopathic scoliosis produced a satisfactory deformity correction with no significant loss of the curve correction. This procedure obviates the need for the anterior release and reduces the complications associated with anterior surgery.