http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
급속응고된 비정질 Zr-Be 합금 용가재를 이용한 Zircaloy-4의 브레이징 특성
김상호,고진현,박춘호,김성규,Kim, Sang-Ho,Go, Jin-Hyeon,Park, Chun-Ho,Kim, Seong-Gyu 한국재료학회 2002 한국재료학회지 Vol.12 No.2
This study was conducted to investigate the brazing characteristics between Zircaloy-4 nuclear fuel cladding tubes and bearing pads with filler metals of amorphous $Zr_{1-x}Be_x$(0.3$\leq$x$\leq$0.5) binary alloy, in which they were produced in the ribbon form by the melt-spinning metod. The crystallization behavior, stability, hardness and micro-structure of brazed zone were examined by X-ray diffraction, differential scanning calorimetry, micro-Vickers hardness test, optical microscopy, and transmission electron microscopy. $Zr_{1-x}Be_x$(0.3$\leq$x$\leq$0.4) amorphous alloys were crystallized to $\alpha$-Zr with increasing the temperature, and the rest were transformed to ZrBe$_2$at higher temperatures. On the other hand, $Zr_{1-x}Be_x$(0.4$\leq$x$\leq$0.5) amorphous alloys were crystallized to $\alpha$-Zr and ZrBe$_2$, simultaneously. The thickness of the layer brazed with amorphous alloy was increased with increasing the beryllium content due to the higher diffusion of Be. The morphology of brazed layer with PVD Be filler metal showed dendrite while that brazed with amorphous alloys appeared globular. Micro-Vickers hardness of brazed zone increased as the beryllium content of filler metal was decreased.
홍수 예.경보 체계 개발을 위한 연구 - 화옹호 유역의 유역 확률홍수량 산정 -
김상호,김한중,홍성구,박창언,이남호,Kim, Sang-Ho,Kim, Han-Joong,Hong, Seong-Gu,Park, Chang-Eoun,Lee, Nam-Ho 한국농공학회 2007 한국농공학회논문집 Vol.49 No.4
The objective of the study is to prepare input data for FIA (Flood Inundation Analysis) & FDA (Flood Damage Assessment) through rainfall-runoff simulation by HEC-HMS model. For HwaOng watershed (235.6 $km^{2}$), HEC-HMS was calibrated using 6 storm events. Geospatial data processors, HEC-GeoHMS is used for HEC-HMS basin input data. The parameters of rainfall loss rate and unit hydrograph are optimized from the observed data. HEC-HMS was applied to simulate rainfall-runoff relation to frequency storm at the HwaOng watershed. The results will be used for mitigating and predicting the flood damage after river routing and inundation propagation analysis through various flood scenarios.
CRT 디스플레이의 패널곡률이 시각작업 수행도와 안피로도에 미치는 영향
김상호,장성호,임종호,Kim, Sang-Ho,Jang, Seong-Ho,Im, Jong-Ho 대한인간공학회 2003 大韓人間工學會誌 Vol.22 No.3
An experiment was carried out to compare the suitability in visual tasks between flat and conventional (convex) cathode-ray tube (CRT) displays. The subjects performed visual search tasks during 2-h for detecting target words among distracters presented on the screen. The subjects' visual performance was evaluated with average time and number of errors made to complete the tasks. Visual fatigue after the search tasks was also evaluated in terms of degradations in accommodative power and subjective ratings. Difference was not found in task time between the two displays, but flat CRT showed a lower number of errors than conventional CRT. The difference in number of errors was statistically significant at 0=0.05. Although there was no difference between the displays in degradations of accommodative power, results from the subjective ratings showed that flat CRT yields less fatigue than conventional CRT. The results partially support the hypothesis that panel convexity of CRT displays has a significant effect on the performance and fatigue during visual tasks and thus flat CRT is the better display than conventional one.
한국제지 50주년 발자취 - 산은 푸르게 경영은 투명하게-조림 1위 기업
김상호,Kim, Sang-Ho 대한인쇄문화협회 2008 프린팅코리아 Vol.71 No.-
올해로 창립 50주년을 맞은 한국제지는 건실한 성장으로 지난해 매출 4000억 원을 돌파한 인쇄용지 전문생산기업이다. 지난 1958년 설립 이래 다양한 인쇄용지를 개발하고 품질제일주의 정신으로 국내 인쇄용지 시장을 선도해 왔으며 2006년에는 고급 복사지 브랜드 '하이퍼 CC'를 출시하여 국내 복사지 시장 진화를 선도하는 등 과감한 마케팅을 시도하고 있다. 재무구조도 우수, 유보율(자본금 대비 잉여금 보유비율)이 1000% 이상에 이르는 등 안정적이고 신용도가 높은 우량기업으로 굳게 자리매김했다. 지난 2월 50주년을 맞아 한국제지는 국민기업으로서 역사에 기억될 수 있도록 창의적인 사고와 도전정신을 앞세워 새로운 50년을 준비하자고 다짐했다. 50주년 기념행사로 사진으로 보는 한국제지 발전사 50년 전시회 관람, 다과회 등 의미 있는 행사들이 진행되었으며, 노동조합의 주관으로 한마음축제가 열려 새로운 50년을 향한 힘찬 출발을 자축하기도 했다. 한국제지 창립 50주년을 맞아 사진으로 50년사를 되돌아 본다.
김상호,Kim, Sang-Ho 대한인쇄문화협회 2008 프린팅코리아 Vol.7 No.8
대한인쇄정보기술협회와 월간 인쇄계가 주최한 제4회 국제인쇄기술컨퍼런스가 지난 7월 11일 서울 소피텔앰배서더호텔에서 인쇄 및 관련업계 관계자 300여명이 참석한 가운데 열렸다. 이날 컨퍼런스는 오성상 신구대학 교수의 진행으로 이어졌다. '드루파 2008을 통해 본 인쇄산업시장의 전망'을 주제로 열린 이번 컨퍼런스에서 김진배 대한 인쇄기술협회 회장은 인사말을 통해 "4회째를 맞은 국제인쇄기술컨퍼런스는 인쇄 각 분야 전문가들의 경험과 노하우를 공유하고 전 세계 인쇄산업의 최신 기술과 정보를 교류하는 기회의 장으로 인쇄기술의 발전에 기여해 왔다"며, "지금 인쇄산업은 미디어와의 융합을 통해 새로운 가치를 창조해내고 있어 이제 더 이상 인쇄가 고전적인 가치에만 머물러 있지 않다는 것을 의미 한다"고 말했다. 김 회장은 이어 "인쇄산업은 기존의 수준에만 머물러 있어서는 안 되며 전 세계적인 변화의 추세에 발맞춰 철저한 준비와 노력이 필요할 뿐 아니라 새로운 비전을 찾을 수 있도록 인쇄산업인 모두의 지혜를 모으는 데 힘을 쏟아야 할 것"이라고 말했다. 이어진 인사말에서 안정웅 월간인쇄계 발행인은 "이번 제4회 국제인쇄기술컨퍼런스는 각 인쇄분야에 있어 더욱 깊은 기술동향 정보를 제공할 것이며 드루파 이후 향후 4년 동안 인쇄산업을 이끌어 나갈 제품과 그 기술들을 만나보고 향방을 점쳐보는 기회가 될 것"이라고 말했다. 홍우동 대한인쇄문화협회 회장은 축사를 통해 "대내외적인 어려움에 직면해 있는 인쇄업계가 어려움을 극복하기 위해 인쇄인은 물론 기자재 공급업체와 언론계, 인쇄단체가 하나 된 마음으로 난관 극복을 위한 지혜를 발휘해야 할 때"라며 "올해부터 발효되고 있는 인쇄문화산업진흥법에 근거해 인쇄문화산업진흥위원회가 활동하는 한편으로 대한인쇄문화협회를 중심으로 정부와 국회가 머리를 맞대고 인쇄업계 발전을 위한 대책을 마련하고 있으며 특히 인쇄종주국으로써 세계적으로 빛나는 우리나라의 인쇄문화 유산과 세계인쇄 사료를 한 그릇에 담을 수 있는 가칭 '세계인쇄문화박물관'건립을 추진하고 있다"고 말했다.