http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : ( Atmawi Darwis ) (검색결과 6 건)
- 무료
- 기관 내 무료
- 유료
-
Atmawi Darwis,Anne HADIYANE,Endah SULISTYAWATI,Ihak Sumardi 한국목재공학회 2023 목재공학 Vol.51 No.4
Bamboo culm is in the form of a tube/pipe, composed of internodes which are bounded by a partition/diaphragm (node). Anatomically, bamboo is composed of vascular bundles and parenchyma ground tissue. One of the constituents of vascular bundles is fibers that are grouped to form a fiber sheath. The anatomical structure of the nodes and internodes is thought to influence the strength of bamboo strips, including tensile strength. This study aimed to determine the characteristics of vascular bundles (distribution and fiber percentage) and their effects on the density and tensile strength of Gigantochloa apus bamboo strips with and without nodes. The bamboo culms were divided into three parts (outer, middle, and inner) along the radial direction. The results showed that the distribution of vascular bundles and percentage of fiber sheaths decreased significantly from the outer to the inner layer. This also had a significantly decreased density and tensile strength. Furthermore, the number of vascular bundles (in the transverse plane) was greater in the internodes than in the nodes. Anatomically, the orientation of the vascular bundles at irregular nodes is observed in the radial and tangential planes, where the direction is not only in the axial direction, but also in the radial and tangential directions. This caused the tensile strength of the G. apus bamboo strips to be lower at the nodes than at the internodes.
-
( Atmawi Darwis ),( Apri Heri Iswanto ) 한국목재공학회 2018 목재공학 Vol.46 No.4
Bamboo culm comprises internodes and nodes and is tapered from the bottom to the top. Anatomically, bamboo culm comprises vascular bundles and parenchymal base tissue. The gross anatomical structure of a transverse section of any culm internode is determined by the shape, size, arrangement, and number of vascular bundles. The purpose of this research was to examine the morphology of culm and the distribution and shape of vascular bundles in Ampel bamboo (Bambusa vulgaris). Bamboo culms were harvested from the base. Test samples were obtained from a central 2-cm long segment of each internode across the entire length of the culm. Results showed an uneven spread of vascular bundles in the internode cross-section. Transitioning from the outer to the inner layer of the internode, the number of vascular bundles per unit area decreased and their shape was variable. The size of vascular bundles in the middle layer of the internode was greater than that of those in the outer and inner layers. The shape of vascular bundles was circular in the outer layer, which gradually transformed into vertical oval toward the middle layer and horizontal oval toward the inner layer. Vascular bundles were of type III and IV in the bottom of the culm and type III in the middle to the top of the culm.
-
-
Quality Enhancement of Falcataria-Wood through Impregnation
( Ihak Sumardi ),( Atmawi Darwis ),( Sahriyanti Saad ),( Muhammad Navis Rofii ) 한국목재공학회 2020 목재공학 Vol.48 No.5
The purpose of this research is to determine the efficiency of impregnation usingphenol formaldehyde resin to enhance Falcataria wood’s stability and better mechanical properties. Impregnation process was carried out after moisture content stabilized at 12% on samples with a dimension of 20 mm × 20 mm × 300 mm at various concentrations and pressure time. Dimensional stability was evaluated by thickness swelling (TS) and anti-swelling efficiency (ASE) and the young’s modulus was conducted according to BS 573. The mechanical properties and dimensional stability of impregnated wood were evaluated. Dimensional stability and mechanical properties of Falcataria wood were successfully increased after impregnation. PF impregnation can improve the mechanical properties and the density from 0.26 g/cm<sup>3</sup> to 0.30 g/cm<sup>3</sup> even with only 10% of weight percent grain. Dimensional stability increases with increasing resin concentration and time pressure. The highest increase in mechanical properties was found at a higher concentration of PF. The penetration of PF into the wood’s cell darkens the color of impregnated wood.
-
Effect of Several Exterior Adhesive Types on Dimensional Stability of Bamboo Oriented Particleboard
Iswanto, Apri Heri,Munthe, Rensus,Darwis, Atmawi,Azhar, Irawati,Susilowati, Arida,Prabuningrum, Dita Sari,Fatriasari, Widya Materials Research Society of Korea 2019 한국재료학회지 Vol.29 No.5
The objective of this research is to evaluate the effect of adhesive types on dimensional stability of bamboo-oriented particleboard. The materials used in this research are bamboo tali(Gigantochloa apus J.A & J.H. Schult. Kurz), UF/MDI(8, 10, 12 % level), and MF, MDI, and PF at 7 % level. Particle and adhesive are mixed using a blending machine; then, mat forming and hot pressing processes are performed using adhesive-suitable temperature and time references. MDI resin is set at $160^{\circ}C$ temperature for 5 minutes. PF resin and MF resin are pressed at $170^{\circ}C$ for 10 minutes, and $140^{\circ}C$ for 10 minutes, respectively, while UF/MDI sets at temperature of $140^{\circ}C$ for 10 minutes. The results show that particleboard using PF resin produces the lowest thickness swelling value. The particleboard using UF/MDI resin also produces good response for thickness swelling value. Interesting things happen in that UF/MDI adhesive produces a thickness swelling value better than that of MDI resin. FTIR analysis on particleboard bonded by UF/MDI resin combination shows the presence of carbonyl group C=O vibration on multi substitution of urea at wave number of around $1,700cm^{-1}$.
-
( Apri Heri Iswanto ),( Fazilla Oktaviani Tarigan ),( Arida Susilowati ),( Atmawi Darwis ),( Widya Fatriasari ) 한국목재공학회 2021 목재공학 Vol.49 No.5
Raru is a lesser-known plant species originating from North Sumatra, Indonesia. Information on the characteristics is still limited, especially its chemical component. Therefore, this study aims to examine the chemical composition information of Cotylelobium lanceolatum, Cotylelobium melanoxylon, and Vatica pauciflora woods based on their axial log positions (bottom, middle, and top). The wood chemical analysis was performed in terms of the Indonesian National Standard (SNI) method. Furthermore, the analysis measured holocellulose, α-cellulose, hemicellulose, lignin content, alcohol benzene extractive content, the extractive substance in hot and water, and solubility in NaOH 1%. The results indicated that the species and their log axial positions affected different chemical components, which included α-cellulose, hemicellulose, and lignin of C. lanceolatum amounting to 41.88%, 19.39%, and 28.68% respectively. Meanwhile, for C. Melanoxylon, they were 42.01%, 21.11%, and 24.76% respectively; and for V. pauciflora wood, they were 42.95%, 23.24%, and 30.11% respectively. The average values of the extractive contents including the solubility in 1: 2 ethanol benzene, NaOH, and hot water for C. lanceolatum, C. melanoxylon, and V. pauciflora wood were (10.58%, 27.62%, 8.13%), (14.54%, 28.22%, 7.82%), and (10.95%, 28.60%, 7.57%) respectively. The wood species had a significant effect on chemical components including lignin, cellulose and hemicellulose, and extractive solubility in cold water. Furthermore, the axial log position had a significant effect on all the parameters of the chemical composition of the wood being tested.
ScienceON
KISS연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
