RISS 학술연구정보서비스

검색

인기 검색어

    다국어 입력

    http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

    변환된 중국어를 복사하여 사용하시면 됩니다.

    예시)
    • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
    • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
    닫기

    목엽천목(木葉天目) 유약에 관한 연구 = Development of the Leaf Tenmoku Glaze

    한글로보기

    https://www.riss.kr/link?id=T11034445

    • 0

      상세조회
    • 0

      다운로드
    서지정보 열기
    • 내보내기
    • 내책장담기
    • 공유하기
    • 오류접수

    부가정보

    국문 초록 (Abstract) kakao i 다국어 번역

    본 논문은 지금까지 많은 도예가들이 신비롭게 생각 할 정도로 베일에 가려져 궁금함을 자아내고 있는 중국 강서성 길주요에서 만들어낸 아름다운 목엽천목의 발색원리에 관한 연구이다.
    우리나라에서 자생하는 다양한 나뭇잎의 성분을 분석하고, 나뭇잎 종류 별로 가장 적당한 하소 온도 및 소성방법을 연구하여 목엽천목을 누구나 쉽게 재현할 수 있도록 하였다.
    아름다운 목엽천목을 얻으려면 적당한 시기에 나뭇잎을 채취하고 나뭇잎 모양이 흩으러 지지 않도록 수분을 건조 시킨 다음 나뭇잎 성분과 두께, 특성을 알아야하고 하소온도(350℃, 370℃~450℃)와 3차 소성 시 온도에 유의하여야한다.
    하소를 할 때에는 직접적으로 열을 가해 나뭇잎 모양이 변형이 생기지 않도록 Alumina판 사이에 넣어 하소 하여야한다.
    뽕나뭇잎이 우연히 천목유에 떨어져 목엽천목을 만들었다는 설을 토대로 2차 소성된 천목유에 하소하지 않은 뽕나무잎을 붙여 잎과 잎맥이 그대로 나온 목엽천목을 얻을 수 있었다. 이때 모든 잎들이 그대로 발색되는 것은 아니었고, 나뭇잎의 CaO 성분보다 SiO2 성분의 함량이 약간 높게 나온 아주 얇거나 두꺼운 나뭇잎보다는 중간 두께의 잎과 CaO 성분의 양이 많아야 목엽천목으로서 조건이 맞는다는 것을 알 수 있었다.
    뽕나무잎은 하소하지 않고도 잘 나왔지만, 떡갈나뭇잎은 잎이 두꺼워 400℃보다 더 높은 온도로 하소하였고, 개나리잎은 K₂O 성분이 많고 잎이 얇아 하소 하지 않으면 재가 되므로 하소하여야한다. 그리고 측백나뭇잎과 은행나뭇잎은 CaO 성분이 많았고, 모든 하소 온도에서도 잘 나왔으며, 온도가 높을수록 금빛이 돌았다.
    대나무잎 성분은 SiO₂가 주를 이루어 모든 하소 온도에서 모래를 얹어서 소성한 것처럼 나왔다.
    나뭇잎의 조건으로서 봄, 여름, 겨울 잎보다는 나무에서 떨어지기 직전의 가을 잎들의 성분이 나뭇잎 끝까지 차있는 규산질 때문에 더 선명하게 나뭇잎 모양 그대로 나온다는 것을 알 수 있었다.
    번역하기

    본 논문은 지금까지 많은 도예가들이 신비롭게 생각 할 정도로 베일에 가려져 궁금함을 자아내고 있는 중국 강서성 길주요에서 만들어낸 아름다운 목엽천목의 발색원리에 관한 연구이다. ...

    본 논문은 지금까지 많은 도예가들이 신비롭게 생각 할 정도로 베일에 가려져 궁금함을 자아내고 있는 중국 강서성 길주요에서 만들어낸 아름다운 목엽천목의 발색원리에 관한 연구이다.
    우리나라에서 자생하는 다양한 나뭇잎의 성분을 분석하고, 나뭇잎 종류 별로 가장 적당한 하소 온도 및 소성방법을 연구하여 목엽천목을 누구나 쉽게 재현할 수 있도록 하였다.
    아름다운 목엽천목을 얻으려면 적당한 시기에 나뭇잎을 채취하고 나뭇잎 모양이 흩으러 지지 않도록 수분을 건조 시킨 다음 나뭇잎 성분과 두께, 특성을 알아야하고 하소온도(350℃, 370℃~450℃)와 3차 소성 시 온도에 유의하여야한다.
    하소를 할 때에는 직접적으로 열을 가해 나뭇잎 모양이 변형이 생기지 않도록 Alumina판 사이에 넣어 하소 하여야한다.
    뽕나뭇잎이 우연히 천목유에 떨어져 목엽천목을 만들었다는 설을 토대로 2차 소성된 천목유에 하소하지 않은 뽕나무잎을 붙여 잎과 잎맥이 그대로 나온 목엽천목을 얻을 수 있었다. 이때 모든 잎들이 그대로 발색되는 것은 아니었고, 나뭇잎의 CaO 성분보다 SiO2 성분의 함량이 약간 높게 나온 아주 얇거나 두꺼운 나뭇잎보다는 중간 두께의 잎과 CaO 성분의 양이 많아야 목엽천목으로서 조건이 맞는다는 것을 알 수 있었다.
    뽕나무잎은 하소하지 않고도 잘 나왔지만, 떡갈나뭇잎은 잎이 두꺼워 400℃보다 더 높은 온도로 하소하였고, 개나리잎은 K₂O 성분이 많고 잎이 얇아 하소 하지 않으면 재가 되므로 하소하여야한다. 그리고 측백나뭇잎과 은행나뭇잎은 CaO 성분이 많았고, 모든 하소 온도에서도 잘 나왔으며, 온도가 높을수록 금빛이 돌았다.
    대나무잎 성분은 SiO₂가 주를 이루어 모든 하소 온도에서 모래를 얹어서 소성한 것처럼 나왔다.
    나뭇잎의 조건으로서 봄, 여름, 겨울 잎보다는 나무에서 떨어지기 직전의 가을 잎들의 성분이 나뭇잎 끝까지 차있는 규산질 때문에 더 선명하게 나뭇잎 모양 그대로 나온다는 것을 알 수 있었다.

    더보기

    다국어 초록 (Multilingual Abstract) kakao i 다국어 번역

    This paper examines the principle of color development in beautiful leaf tenmoku-glaze made in Gilljuyo, Jiangxi which has not been unveiled yet and made many potters wander about it mysteriously.
    The leaves of various trees that grow in Korea were analyzed in their composition, and the most appropriate calcination temperature and method were studied so that anyone can easily reproduce the leaf tenmoku-glaze.
    In order to obtain beautiful leaf tenmoku-glaze, the tree leaves need to be collected at appropriate timing and dehydrated so that the shape of the leaf is not disturbed(350℃, 370℃,~ 450℃). Then, the composition, the thickness and the feature of the leaf must be determined, and careful attention needs to be paid to the temperature during the third calcination process. During calcination process, the leaf should be placed between alumina panels to avoid the deformation in the shape of the leaf caused by the direct heat.
    Based on the hypothesis that a leaf from a mulberry tree happened to fall on the tenmoku-glaze and became the leaf tenmoku-glaze, attachment of an uncalcinated mulberry leaf on the tenmoku-glaze from the 2nd calcination yielded a leaf tenmoku-glaze that had the exact form of the leaf and the vein. However, not every leaf was colorized in this way, and it is found that a leaf with medium thickness fits the condition for becoming a leaf tenmoku-glaze than those leaves with very light or heavy thickness that have a little more SiO2 content than CaO content.
    The mulberry leaves were well expressed even without calcination, but the oak leaves are so thick that they required a higher calcination temperature than 400℃. In the case of the forsythia leaves, they need to be calcinated at 420℃ since they have a high K₂O content and become ashes because they are so thin. Also, the thuja leaves had a high CaO content and were well expressed at any calcination temperature, and their color showed a golden light as the temperature increased. In the case of bamboo leaves, they were shown as if covered with sand in any calcination temperature because SiO₂ forms the major component of the bamboo leaves.
    It is found that as to the seasonal conditions, rather than spring, summer, and winter, the leaves collected in the fall right before they are detached from the tree showed the best expression. Namely, the form of the leaf was preserved and more clearly expressed due to the full amount of silicic acid materials contained in the falling leaves.
    번역하기

    This paper examines the principle of color development in beautiful leaf tenmoku-glaze made in Gilljuyo, Jiangxi which has not been unveiled yet and made many potters wander about it mysteriously. The leaves of various trees that grow in Korea were a...

    This paper examines the principle of color development in beautiful leaf tenmoku-glaze made in Gilljuyo, Jiangxi which has not been unveiled yet and made many potters wander about it mysteriously.
    The leaves of various trees that grow in Korea were analyzed in their composition, and the most appropriate calcination temperature and method were studied so that anyone can easily reproduce the leaf tenmoku-glaze.
    In order to obtain beautiful leaf tenmoku-glaze, the tree leaves need to be collected at appropriate timing and dehydrated so that the shape of the leaf is not disturbed(350℃, 370℃,~ 450℃). Then, the composition, the thickness and the feature of the leaf must be determined, and careful attention needs to be paid to the temperature during the third calcination process. During calcination process, the leaf should be placed between alumina panels to avoid the deformation in the shape of the leaf caused by the direct heat.
    Based on the hypothesis that a leaf from a mulberry tree happened to fall on the tenmoku-glaze and became the leaf tenmoku-glaze, attachment of an uncalcinated mulberry leaf on the tenmoku-glaze from the 2nd calcination yielded a leaf tenmoku-glaze that had the exact form of the leaf and the vein. However, not every leaf was colorized in this way, and it is found that a leaf with medium thickness fits the condition for becoming a leaf tenmoku-glaze than those leaves with very light or heavy thickness that have a little more SiO2 content than CaO content.
    The mulberry leaves were well expressed even without calcination, but the oak leaves are so thick that they required a higher calcination temperature than 400℃. In the case of the forsythia leaves, they need to be calcinated at 420℃ since they have a high K₂O content and become ashes because they are so thin. Also, the thuja leaves had a high CaO content and were well expressed at any calcination temperature, and their color showed a golden light as the temperature increased. In the case of bamboo leaves, they were shown as if covered with sand in any calcination temperature because SiO₂ forms the major component of the bamboo leaves.
    It is found that as to the seasonal conditions, rather than spring, summer, and winter, the leaves collected in the fall right before they are detached from the tree showed the best expression. Namely, the form of the leaf was preserved and more clearly expressed due to the full amount of silicic acid materials contained in the falling leaves.

    더보기

    목차 (Table of Contents)

    • Ⅰ. 서론 = 1
    • 1.1. 목엽천목 유약에 관한연구 = 1
    • 1.1.1 역사적 배경 = 1
    • 1.1.2 이론적 배경 = 2
    • Ⅱ. 실험방법 = 5
    • Ⅰ. 서론 = 1
    • 1.1. 목엽천목 유약에 관한연구 = 1
    • 1.1.1 역사적 배경 = 1
    • 1.1.2 이론적 배경 = 2
    • Ⅱ. 실험방법 = 5
    • 2.1. 유약 원료 = 5
    • 2.2. 시험편 제작 = 8
    • 2.3. 나뭇잎 숯 제조 = 9
    • 2.4. 목엽천목 제조 = 12
    • 2.5. 소성 조건 = 12
    • 2.5.1 1차 소성 = 12
    • 2.5.2 2차 소성 = 13
    • 2.5.3 3차 소성 = 14
    • 2.5.4 나뭇잎 소성 = 15
    • Ⅲ. 결과 및 고찰 = 16
    • 3.1. 기본유약 = 16
    • 3.2. UV 측정 = 20
    • 3.3. 나뭇잎의 성분 분석 = 21
    • 3.4. 목엽천목 제조 = 25
    • 3.4.1 기본유(천목유) = 25
    • 3.4.2 기본유(반매트 천목유) = 26
    • 3.4.3 기본유(유적 천목유) = 27
    • 3.5. 나뭇잎의 최적 하소 온도 = 29
    • 3.6. 뽕나무 생 잎의 3차 소성 = 36
    • Ⅳ. 결론 = 37
    • 참고문헌 = 39
    • ABSTRACT = 40
    • 감사의 글 = 42
    더보기

    분석정보

    View

    상세정보조회

    0

    Usage

    원문다운로드

    0

    대출신청

    0

    복사신청

    0

    EDDS신청

    0

    동일 주제 내 활용도 TOP

    더보기

    주제

    연도별 연구동향

    연도별 활용동향

    연관논문

    연구자 네트워크맵

    공동연구자 (7)

    유사연구자 (20) 활용도상위20명

    이 자료와 함께 이용한 RISS 자료

    나만을 위한 추천자료

    해외이동버튼