본 논문은 나노유체를 적용하여 써모사이폰 열전달 성능 특성 변화를 실험적으로 규명하는 것을 목적으로 하고 있다. 이를 위하여, 증발부 내부체적을 공유하는 3 개의 독립된 파이프를 가...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A100453313
2012
Korean
KCI등재,SCOPUS,ESCI
학술저널
1073-1079(7쪽)
0
0
상세조회0
다운로드국문 초록 (Abstract)
본 논문은 나노유체를 적용하여 써모사이폰 열전달 성능 특성 변화를 실험적으로 규명하는 것을 목적으로 하고 있다. 이를 위하여, 증발부 내부체적을 공유하는 3 개의 독립된 파이프를 가...
본 논문은 나노유체를 적용하여 써모사이폰 열전달 성능 특성 변화를 실험적으로 규명하는 것을 목적으로 하고 있다. 이를 위하여, 증발부 내부체적을 공유하는 3 개의 독립된 파이프를 가지는 써모사이폰을 제작하였으며 증류수, Ag 나노유체 그리고 TiO₂ 나노유체에 대하여 충진량, 증발부에 가해지는 입력열량 그리고 농도변화에 따른 써모사이폰 성능특성 변화를 고찰하였다. 증류수를 작동유체로 사용하는 경우 써모사이폰의 최적충진량은 30%로 결정되었고, TiO₂ 나노유체를 적용하는 써모사이폰 열저항이 Ag 나노유체를 적용한 경우에 비하여 평균 18.1% 감소하였다. 또한, 300W 입력열량 및 TiO₂ 나노유체 농도 1%에서 써모사이폰의 열전달 성능은 가장 우수하였다.
다국어 초록 (Multilingual Abstract)
This study aims to experimentally investigate the heat transfer characteristics of a thermosyphon using nanofluids. A thermosyphon with three individual pipes, which share the internal volume of the evaporator section, was designed, and its performanc...
This study aims to experimentally investigate the heat transfer characteristics of a thermosyphon using nanofluids. A thermosyphon with three individual pipes, which share the internal volume of the evaporator section, was designed, and its performance was tested for various charge amounts, input powers of the evaporator section’s heater, and concentrations of working fluids. The optimized charge amount of the thermosyphon using distilled water was 30%, and the thermal resistance of the thermosyphon with TiO₂ nanofluid was 18.1% lower than that with Ag nanofluid. In addition, the heat transfer performance of the thermosyphon with TiO₂-1% was optimized at an input power of 300 W at the evaporator section’s heater and a charge amount of 30%.
목차 (Table of Contents)
참고문헌 (Reference)
1 임택규, "저온작동 조건에서 자동차용 써모사이폰의 성능특성에 관한 연구" 한국산학기술학회 13 (13): 510-515, 2012
2 황교식, "나노입자 형상 변화에 따른 알루미나 나노유체의 유동 특성" 대한기계학회 35 (35): 293-299, 2011
3 Lim, T. K., "Two-Phase Loop Thermosyphon Cooling System Using Nanofluids" ChungBuk Univ., 2006
4 Lim, T. K, "Thermal Characteristics of NanofluidicHeatpipe Hot Chuck" 11 : 2110-2115, 2008
5 Ha, H. J., "Thermal Characteristics of Flat Plate Heat Pipes with Nanofluids" 11 : 2607-2611, 2010
6 Park, K. H., "Study on the Operating Characteristics in Small Size Heat Pipe Using Nanofluids" 11 : 37-42, 2005
7 Sarit, K. D., "Nanofluids Science and Technology" Wiley-Interscience 2007
8 Lee, S. P., "Measuring Thermal Conductivity of Nanofluids andHeat Transfer Enhancement" 147-150, 2006
9 Faghri, A., "Heat Pipe Science and Technology" Taylor and Francis 1995
10 Lim, T. K., "Experimental Study on the Low Temperature Performance Characteristics of the Thermosyphon With or Without Wick" 1245-1248, 2012
1 임택규, "저온작동 조건에서 자동차용 써모사이폰의 성능특성에 관한 연구" 한국산학기술학회 13 (13): 510-515, 2012
2 황교식, "나노입자 형상 변화에 따른 알루미나 나노유체의 유동 특성" 대한기계학회 35 (35): 293-299, 2011
3 Lim, T. K., "Two-Phase Loop Thermosyphon Cooling System Using Nanofluids" ChungBuk Univ., 2006
4 Lim, T. K, "Thermal Characteristics of NanofluidicHeatpipe Hot Chuck" 11 : 2110-2115, 2008
5 Ha, H. J., "Thermal Characteristics of Flat Plate Heat Pipes with Nanofluids" 11 : 2607-2611, 2010
6 Park, K. H., "Study on the Operating Characteristics in Small Size Heat Pipe Using Nanofluids" 11 : 37-42, 2005
7 Sarit, K. D., "Nanofluids Science and Technology" Wiley-Interscience 2007
8 Lee, S. P., "Measuring Thermal Conductivity of Nanofluids andHeat Transfer Enhancement" 147-150, 2006
9 Faghri, A., "Heat Pipe Science and Technology" Taylor and Francis 1995
10 Lim, T. K., "Experimental Study on the Low Temperature Performance Characteristics of the Thermosyphon With or Without Wick" 1245-1248, 2012
11 Ha, H. J., "Experimental Investigation on ThermalCharacteristics of Heat Pipes Using Water-basedMECNT Nanofluids" 23 (23): 528-534, 2011
12 Kang, H. U., "Effects of Nanoparticles on Heat Transfer ofNanofluid" 19-24, 2004
13 신동륜, "Comparative study on heat transfer characteristics of nanofluidic thermosyphon and grooved heat pipe" 대한기계학회 25 (25): 1391-1398, 2011
후방 요추 극돌기간 유동적 오메가형 스프링 고정재의 역학적 평가
과급에 의한 디젤 및 바이오디젤의 저온연소 운전영역 확장에 관한 연구
외상성 관절염 진행에 따른 경골 골단 해면골에서의 골 미세구조 변화 패턴 추적 관찰
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2023 | 평가예정 | 해외DB학술지평가 신청대상 (해외등재 학술지 평가) | |
2020-01-01 | 평가 | 등재학술지 유지 (해외등재 학술지 평가) | |
2010-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2008-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2006-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2004-01-01 | 평가 | 등재학술지 유지 (등재유지) | |
2001-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | |
1998-07-01 | 평가 | 등재후보학술지 선정 (신규평가) |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.23 | 0.23 | 0.25 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.22 | 0.19 | 0.552 | 0.03 |