치과용 CAD/CAM 전용 세라믹기반 하이브리드 레진 수복물의 변연 적합 연구 = A study on marginal fit of the ceramic-based hybrid resin restoration for dental CAD/CAM systems

다국어 초록 (Multilingual Abstract)

Purpose: This study aimed to assess and compare the marginal fit of ceramic-based hybrid resin restoration (HYB) and zirconia restoration (ZIR) for dental computer-aided design/computer-aided manufacturing systems. Methods: A stainless steel master model was produced. The impression was first made with silicone, and then stone working models were produced. A total of twenty restorations were fabricated with two different materials: ZIR and HYB. The silicone film thickness of the marginal gap was measured using a digital microscope; digital photos were taken at a magnification of ×160, and then analyzed using a measurement software. The values of the result were evaluated with the independent-sample t-test (α=0.05). All statistical analyses were performed with a statistical software. Results: The mean values for the marginal gap was 37.14±2.96 ㎛ for HYB, compared with 40.37±5.26 ㎛ for ZIR. No significant difference was found between ZIR and HYB (p=0.107). Conclusion: As a result, the marginal fit of the restoration fabricated using the hybrid resin was better than that of the restoration fabricated using zirconia. Also, the marginal fit of all groups was below the clinical acceptable range of 120 ㎛. Thus, HYB for dental CAD/CAM system in this study is expected to be suitable for clinical use in dentistry.

참고문헌 (Reference)

1 Assif D, "The flow of zinc phosphate cement under a full-coverage restoration and its effect on marginal adaptation according to the location of cement application" 18 : 765-774, 1987

2 McLean JW, "The estimation of cement film thickness by an in vivo technique" 131 : 107-111, 1971

3 Tuntiprawon M, "The effect of cement thickness on the fracture strength of all-ceramic crowns" 40 : 17-21, 1995

4 Lofstrom LH, "Scanning electron microscopic evaluation of clinically cemented cast gold restorations" 61 : 664-669, 1989

5 Shofu, "SHOFU block HC · Disk HC" SHOFU Dental GmbH

6 Seghi RR, "Relative flexural strength of six new ceramic materials" 8 : 239-246, 1995

7 Goldman M, "Microleakage–full crowns and the dental pulp" 18 : 473-475, 1992

8 Awada A, "Mechanical properties of resinceramic CAD/CAM restorative materials" 114 : 587-593, 2015

9 Hung SH, "Marginal fit of porcelain-fused-to-metal and two types of ceramic crown" 63 : 26-31, 1990

10 Beuer F, "Marginal and internal fits of fixed dental prostheses zirconia retainers" 25 : 94-102, 2009

11 Nakamura T, "Marginal and internal fit of Cerec 3 CAD/CAM all-ceramic crowns" 16 : 244-248, 2003

12 Contrepois M, "Marginal adaptation of ceramic crowns : a systematic review" 110 : 447-454.e10, 2013

13 Rahme HY, "In vitro evaluation of the"replica technique"in the measurement of the fit of Procera crowns" 9 : 25-32, 2008

14 Daniel C, "Improving flexural strength of dental restorative ceramics using laser interference direct structuring" 91 : 3455-3457, 2008

15 Rekow ED, "High-technology innovations–and limitations–for restorative dentistry" 37 : 513-524, 1993

16 Petrini M, "Fabrication and characterization of biomimetic ceramic/polymer composite materials for dental restoration" 29 : 375-381, 2013

17 Felton DA, "Effect of in vivo crown margin discrepancies on periodontal health" 65 : 357-364, 1991

18 Holmes JR, "Considerations in measurement of marginal fit" 62 : 405-408, 1989

19 Arocha MA, "Colour stainability of indirect CAD-CAM processed composites vs. conventionally laboratory processed composites after immersion in staining solutions" 42 : 831-838, 2014

20 Al-Amleh B, "Clinical trials in zirconia : a systematic review" 37 : 641-652, 2010

21 Laurent M, "Clinical evaluation of the marginal fit of cast crowns–validation of the silicone replica method" 35 : 116-122, 2008

22 Lang NP, "Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins" 10 : 563-578, 1983

23 Bindl A, "Clinical and SEM evaluation of all-ceramic chair-side CAD/CAM-generated partial crowns" 111 : 163-169, 2003

24 Della Bona A, "Characterization of a polymer-infiltrated ceramic-network material" 30 : 564-569, 2014

25 Poticny DJ, "CAD/CAM in-office technology: innovations after 25 years for predictable, esthetic outcomes" 141 (141): 5S-9S, 2010

26 Tsitrou EA, "Brittleness index of machinable dental materials and its relation to the marginal chipping factor" 35 : 897-902, 2007

27 Abdul Rahman Mohammed Saleh, "An in-vitro comparison of fracture resistance of three CAD/CAM Ceramic materials for fabricating Veneer" Elsevier BV 2020

28 Wataha JC, "Alloys for prosthodontic restorations" 87 : 351-363, 2002

29 Moon BH, "A study on the marginal fit of all-ceramic crown using CCD camera" 36 : 273-292, 1998

30 Shin MH, "A study on improvements in manufatured technique of all ceramic crown" 23 : 9-15, 2002

31 Choi UJ, "A study on how cyclic casting of base metal alloy for dental ceramic crown may effects upon its mechanical properties and microstructure" 25 : 9-20, 2003

32 Sorensen JA, "A standardized method for determination of crown margin fidelity" 64 : 18-24, 1990

33 Miyazaki T, "A review of dental CAD/CAM : current status and future perspectives from 20 years of experience" 28 : 44-56, 2009

34 Holst S, "A new triplescan protocol for 3D fit assessment of dental restorations" 42 : 651-657, 2011

35 Kim EH, "A comparative study on the fracture strength of esthetic porcelain crowns" 29 : 79-85, 2007