1 이우람, "티타늄 합금에 대한 레이저 쇼크 피닝에서 컨파인먼트에 따른 피닝 효과 모델링" 한국생산제조학회 22 (22): 680-685, 2013
2 신상범, "박판 패널 용접부의 용접 기법에 따른 좌굴 변형에 관한 연구" 대한용접접합학회 26 (26): 23-29, 2008
3 권기보, "레이저용접에 의한 알루미늄 박판구조물의 용접변형 해석" 대한용접접합학회 27 (27): 44-51, 2009
4 이우람, "레이저 드릴링을 통한 강판 가공 시 응력 모델링" 대한기계학회 37 (37): 857-864, 2013
5 신상범, "다층양면 개선 맞대기 용접부의 각 변형 예측에 관한 연구" 대한용접접합학회 25 (25): 37-41, 2007
6 한정우, "공압식 헤머피닝을 이용한 용접부 피로수명 연장기술 연구" 대한기계학회 33 (33): 842-848, 2009
7 김인태, "강교 도장용 블라스트 표면처리에 의한 용접이음의 피로강도 향상" 한국강구조학회 23 (23): 137-146, 2011
8 김지수, "가압경수로 노즐 맞대기 이종금속용접부의 용접잔류응력 예측" 대한기계학회 36 (36): 137-148, 2012
9 Wayne. E. N., "Weld induced residual stress measurements via the hole-drilling strain gage method" The American society of mechanical engineers 1984
10 G. Toker, "Underwater interaction of 1064 ㎚laser radiation with metal target" 55 : 25-28, 2009
1 이우람, "티타늄 합금에 대한 레이저 쇼크 피닝에서 컨파인먼트에 따른 피닝 효과 모델링" 한국생산제조학회 22 (22): 680-685, 2013
2 신상범, "박판 패널 용접부의 용접 기법에 따른 좌굴 변형에 관한 연구" 대한용접접합학회 26 (26): 23-29, 2008
3 권기보, "레이저용접에 의한 알루미늄 박판구조물의 용접변형 해석" 대한용접접합학회 27 (27): 44-51, 2009
4 이우람, "레이저 드릴링을 통한 강판 가공 시 응력 모델링" 대한기계학회 37 (37): 857-864, 2013
5 신상범, "다층양면 개선 맞대기 용접부의 각 변형 예측에 관한 연구" 대한용접접합학회 25 (25): 37-41, 2007
6 한정우, "공압식 헤머피닝을 이용한 용접부 피로수명 연장기술 연구" 대한기계학회 33 (33): 842-848, 2009
7 김인태, "강교 도장용 블라스트 표면처리에 의한 용접이음의 피로강도 향상" 한국강구조학회 23 (23): 137-146, 2011
8 김지수, "가압경수로 노즐 맞대기 이종금속용접부의 용접잔류응력 예측" 대한기계학회 36 (36): 137-148, 2012
9 Wayne. E. N., "Weld induced residual stress measurements via the hole-drilling strain gage method" The American society of mechanical engineers 1984
10 G. Toker, "Underwater interaction of 1064 ㎚laser radiation with metal target" 55 : 25-28, 2009
11 Haagensen, P. J., "The effects of grinding and peening on the fatigue strength of welded T-joints"
12 R. Rieder, "The chemical composition of martian soil and rocks returned by the mobile alpha proton X-ray spectrometer preliminary results from the X-ray mode" 278 (278): 1771-1774, 1997
13 Jang, H. S., "The Handbook of advanced aluminum technology" Hanlimwon 1997
14 Commission of design, analysis and structural strength of welded structures, "Standardization for temperature distribution prediction of the arc weld using FEA" 23 (23): 1-7, 2005
15 Juijerm, P., "Residual stress relaxation of deep-rolled Al-Mg-Si-Cu alloy during cyclic loading at elevated temperature" 55 : 1111-1114, 2006
16 Dong, P., "Residual stress com-pendium compilation, Draft protocol and call for participation, IIW Doc. IIW-XII-XV-RSDP-43-02"
17 Muammer, K., "Prediction of residual stress in quenched aluminum block and their reduction through cold working processed" 174 : 342-354, 2006
18 Porter, D., "Performance of TMCP steel with respect to mechanical properties after cold forming and post-forming heat treatment" 81 : 867-877, 2004
19 K. L. Choo, "Micromachining of silicon by short-pulse laser ablation in air and under water" A-372 (A-372): 145-162, 2004
20 James M. Gere, "Mechanics of material" Cengage learning 116-127, 2011
21 Rossoll, A., "Mechanical aspects of the charpy impact test" 188 : 217-229, 1999
22 Gordon, R., "IIW X/XV JWG RSDP roundobin phase 1"
23 R. Poprawe, "Hydrodynamics of material removal by melt expulsion:Perspectives of laser cutting and drilling" 5 : 1-18, 2010
24 Rendler. N. J., "Holerilling strain gage method of measuring residual stresses" 6 (6): 577-586, 1966
25 Shin, Y. T., "Fracture characteristics of TMCP and QT steel weldments with respect to crack length" 434 : 64-371, 2006
26 Gihodo Shuppan, "Fatigue design recommendations for steel structures" Japan society of steel construction 1993
27 Hong, S., "Fatigue characteristics of non loadarrying fillet welded joints according to postrocessing in weld bead toes" 12 (12): 701-713, 2000
28 Jang, Y. C., "Effects of notch position of the charpy impact specimen on the failure behavior in heat affected zone" 201 : 419-424, 2008
29 Watanabe, M., "Effect of restraint on root cracking of steel welds" 33 (33): 446-457, 1964
30 Satoh, K., "Development of reaction stress and weld cracking under restrain" 36 (36): 1096-1109, 1964
31 International institute of welding, "Commissions XIII and XV, recommendations for fatigue design of welded joints and components"
32 International institute of welding, "Commissions XIII and XV, IIW recommendations on post weld improvement of steel and aluminum structures"
33 C. Fabre, "Chemcam LIBS instrument: Complete characterization of the onboard calibration silicate targets (MSL Rover)" 1533 : 1835-, 1835
34 Steenivasan, P. R., "Charpy energy-lateral expansion relations for a wide range of steels" 83 : 498-504, 2006
35 Devillers, L., "An approach to predicting micro structures and toughness properties in heat affected zones of multipass welds of structural steels" 31 : 256-267, 1993
36 Ueda, Y., "A predicting method of welding residual stress using source of residual stress" 18 (18): 135-141, 1989
37 Simsir, C., "3D FEM simulation of steel quenching and investigation of the effect of asymmetric geometry on residual stress distribution" 207 : 211-221, 2008