Development of Bamboo Zephyr Composite and the Physical and Mechanical Properties

다국어 초록 (Multilingual Abstract)

The objective of this study is to determine the effect of fiber direction arrangement and layer composition of hybrid bamboo laminate boards on the physical and mechanical properties. The raw material used was tali bamboo (Gigantochloa apus (J.A. & J.H. Schultes) Kurs) rope in the form of flat sheets (zephyr) and falcata veneer (Paraserianthes falcataria (L) Nielsen). Zephyr bamboo was arranged in three layers using water-based isocyanate polymer (WBPI) with a glue spread rate of 300 g/m2. There were variations in the substitution of the core layer with falcata veneers (hybrid) as much as two layers and using a glue spread rate of 170 g/m2. The laminated bamboo board was cold-pressed at a pressure of 22.2 kgf/cm2 for 1 h, and the physical and mechanical properties were evaluated. The results showed that the arrangement of the fiber direction significantly affected the dimensional stability, modulus of rupture, modulus of elasticity, shear strength, and screw withdrawal strength. However, the composition of the layers had no significant effect on the physical and mechanical properties. The bonding quality of bamboo laminate boards with WBPI was considered to be quite good, as shown by the absence of delamination in all test samples. The bamboo hybrid laminate board can be an alternative based on the physical and mechanical properties that can meet laminated board standards.

참고문헌 (Reference)

1 노정관, "목재 단판-대나무 제퍼 복합보드 제조: Ⅱ. 복합보드의 성능에 미치는 제조조건의 영향" 한국목재공학회 35 (35): 108-117, 2007

2 김유정 ; 박상진 ; 노정관, "대나무 Zephyr의 제조 조건에 따른 보드의 물성비교" 한국목재공학회 31 (31): 24-30, 2003

3 김유정 ; 노정관 ; 박상진 ; 정기호, "대나무 Zephyr 보드의 제조에 있어서 열압시간과 열압온도가 보드성능에 미치는 영향" 한국목재공학회 31 (31): 77-83, 2003

4 Dunky, M., "Wood Adhesion and Glued Products: Working Group 1:Wood Adhesive" EU Publicatoin 2002

5 Darwis, A., "The characteristics of the laminated board of oil palm trunk" 12 (12): 157-168, 2014

6 Apri Heri Iswanto ; Arif Rahman HAKIM ; Irawati Azhar ; Basuki WIRJOSENTONO ; Dita Sari PRABUNINGRUM, "The Physical, Mechanical, and Sound Absorption Properties of Sandwich Particleboard (SPb)" 한국목재공학회 48 (48): 32-40, 2020

7 Nurdiansyah Muhammad GALIH ; 양승민 ; 유승민 ; 강석구, "Study on the Mechanical Properties of Tropical Hybrid Cross Laminated Timber Using Bamboo Laminated Board as Core Layer" 한국목재공학회 48 (48): 245-252, 2020

8 Bal, B. C., "Some technological properties of laminated veneer lumber produced with fast-growing poplar and eucalyptus" 18 (18): 413-424, 2016

9 Sulastiningsih, I. M., "Some properties of bamboo composite lumber made of Gigantochloa pseudoarundinacea" 8 : 122-130, 2018

10 Ming-Yu WEN ; Jia-Zhi ZHU ; Meng ZHU ; Yao-Xing SUN ; 박희준 ; Junyou SHI, "Research on Flame Retardant Formaldehyde-Free Plywood Glued by Aqueous Polymer Isocyanate Adhesive" 한국목재공학회 48 (48): 755-764, 2020

11 양승민 ; 이화형 ; 강석구, "Research Trends in Hybrid Cross-Laminated Timber (CLT) to Enhance the Rolling Shear Strength of CLT" 한국목재공학회 49 (49): 336-359, 2021

12 안경선 ; 방성준 ; 오정권, "Prediction of Withdrawal Resistance of Single Screw on Korean Wood Products" 한국목재공학회 49 (49): 93-102, 2021

13 Lee, A. W. C., "Physical and mechanical properties of strandboard made from Moso bamboo" 46 (46): 84-88, 1996

14 SNI [Indonesia National Standard], "Particle Board:03-2105-2006. Badan Standardisasi Nasional"

15 김사익 ; 김유정 ; 나종범 ; 김재경 ; 박상진 ; Jeang Kwan Roh, "Manufacture of Wood Veneer-Bamboo Zephyr Composite Board- I. Properties of Banboo Zephyr and Composite Board Maed from Moso, Giant Timber and Hachiku Bamboo-" 한국목재공학회 32 (32): 42-51, 2004

16 Subyakto, Gopar, M., "Manufacture and characterization of bamboo zephyr composites with cold press" 1 : 32-37, 2016

17 JAS [Japanese Agricultural Standards], "Japanese agricultural standard for plywood. JAS 003"

18 JAS [Japanese Agricultural Standards], "Japanese agricultural standard for laminated veneer lumber. JAS 2773"

19 Erdil, Y. Z., "Holding strength of screws in plywood and oriented strandboard" 52 (52): 55-63, 2002

20 Suhaily, S. S., "Evaluation of screw pulling and flexural strength of bamboobased oil palm trunk veneer hybrid biocomposites intended for furniture applications" 14 (14): 8376-8390, 2019

21 Sharma, B., "Engineered bamboo : State of the art" 168 (168): 57-67, 2014

22 Kariuki, J., "Effect of orientation and arrangement of bamboo strips on structural strength of laminated bamboo beam" 7 (7): 555-568, 2015

23 Sumawa, I. W. A. M., "Effect of borax preservatives and tobacco extracts on the behavior of bamboo isocyanate polymer adhesive laminate" 14 (14): 104-111, 2019

24 Ya-Hui Zhang ; Yu-Xiang Huang ; Hong-Xia Ma ; Wen-Ji Yu ; Yue Qi, "Effect of Different Pressing Processes and Density on Dimensional Stability and Mechanical Properties of Bamboo Fiber-based Composites" 한국목재공학회 46 (46): 355-361, 2018

25 Sumardi, I., "Dimensional stability and mechanical properties of strandboard made from bamboo" 9 (9): 1159-1167, 2014

26 Nugroho, N., "Development of structural composite products made from bamboo II : Fundamental properties of laminated bamboo lumber" 47 (47): 237-242, 2001

27 Nugroho, N, "Development of processing methods for bamboo composite materials and its structural performance" Tokyo University 2000

28 Verma, C. S., "Development of layered laminate bamboo composite and their mechanical properties" 43 (43): 1063-1069, 2012

29 Sulastiningsih, I. M, "Development of cross laminated boards made of bamboo andong (Gigantochloa pseudoarundinacea)" Bogor Agricultural Institute 2014

30 Sena Maulana ; Yuarsa Gumelar ; Adesna Fatrawana ; Muhammad Iqbal Maulana ; Wahyu Hidayat ; Ihak Sumardi ; Nyoman Jaya Wistara ; 이승환 ; 김남훈 ; Fauzi Febrianto, "Destructive and Non-destructive Tests of Bamboo Oriented Strand Board under Various Shelling Ratios and Resin Contents" 한국목재공학회 47 (47): 519-532, 2019

31 SNI [Indonesia National Standard], "Design Specifications for Wood Construction: 7973-2013"

32 Sulastiningsih, I. M., "Characteristics of lamina bamboo beams arrange upright from the Andong bamboo blade(Gigantochloa pseudoarundinacea(Steud. )Widjaja)" 34 (34): 167-177, 2016

33 Kabe, A., "Characteristics of falcata rotary-cut veneer" 10 (10): 139-149, 2012

34 Agustina, A., "Characteristics of cross laminated bamboo as a structural composite material" 25 (25): 174-181, 2015

35 Supriadi, A., "Characteristics of bamboo lamination on Jabon boards" 35 (35): 263-272, 2017

36 Central Bureau of Statistics, "Central Bureau of Statistics: Production of Non-Timber Forest Product (Bamboo)"

37 Dungani, R., "Biomass and Bioenergy" Springer 2016