Direct Ink Writing of Mineral Materials: A review

다국어 초록 (Multilingual Abstract)

Due to the intrinsically limited mechanical properties, functionalities and structures of mineral material composites (MMCs) made through traditional fabrication approaches, there is a critical need to develop novel three dimensional (3D) forming techniques that can construct mineral material composites (MMCs) and structures with high performance and functionalities. The direct ink writing (DIW), as a slurry deposition based additive manufacturing approach for MMCs, offers many advantages in terms of high precision, complex geometry, multi-material capability, cost effectiveness and environmental friendliness. This review gives a comprehensive overview on the state-of-art of DIW fabricated MMCs, including material classification, formulation and processing. It presents the key aspects of material processing and their effects on the properties and performance of DIW formed mineral materials. In addition, it illustrates the applications of DIW in the fields of architecture, tissue engineering, functional micro parts and geological engineering modelling.

참고문헌 (Reference)

1 Kading, B., "Utilizing in-situ resources and 3D printing structures for a manned Mars mission" 107 : 317-326, 2015

2 Di, L. A., "Toward mimicking the bone structure : design of novel hierarchical scaffolds with a tailored radial porosity gradient" 8 (8): 045007-, 2016

3 Hasiuk, F., "Touchable topography : 3D printing elevation data and structural models to overcome the issue of scale" 32 (32): 16-20, 2016

4 Bell, L., "Top-level considerations for planning lunar/planetary habitat structures" 24 (24): 349-360, 2011

5 Trunec, M., "Thermal removal of multicomponent binder from ceramic injection mouldings" 22 (22): 2231-2241, 2002

6 신정활, "The Development of Gelatin-Based Bio-Ink for Use in 3D Hybrid Bioprinting" 한국정밀공학회 19 (19): 767-771, 2018

7 Frank Schneider, "Sustainability in Ultra precision and Micro machining: A Review" 한국정밀공학회 6 (6): 601-610, 2019

8 Fratzl, P., "Structure and mechanical quality of the collagen–mineral nanocomposite in bone" 14 (14): 2115-2123, 2004

9 Perrot, A., "Structural built-up of cement-based materials used for 3D-printing extrusion techniques" 49 (49): 1213-1220, 2016

10 Nair, G. M., "Strategic, technological and ethical aspects of establishing colonies on Moon and Mars" 63 (63): 1337-1342, 2008

11 Szabó, J. S., "Static fracture and failure behavior of aligned discontinuous mineral fibre reinforced polypropylene composites" 22 (22): 711-719, 2003

12 Wang, G., "Sn/graphene nanocomposite with 3D architecture for enhanced reversible lithium storage in lithium ion batteries" 19 (19): 8378-8384, 2009

13 Abdeljawad, F., "Sintering processes in direct ink write additive manufacturing : A mesoscopic modeling approach" 169 : 60-75, 2019

14 Akinribide, O. J., "Sintering of binderless TiN and TiCN-based cermet for toughness applications:Processing techniques and mechanical properties: A review" 45 (45): 21077-21090, 2019

15 Kate, K. H., "Simulations and injection molding experiments for aluminum nitride feedstock" 42 (42): 194-203, 2016

16 Gaal, G., "Simplified fabrication of integrated microfluidic devices using fused deposition modeling 3D printing" 242 : 35-40, 2017

17 Hager, M. D., "Self-healing materials" 22 (22): 5424-5430, 2010

18 Greil, P., "Self-healing engineering ceramics with oxidation-induced crack repair" 2019

19 Nyström, G., "Self-assembled three-dimensional and compressible interdigitated thin-film supercapacitors and batteries" 6 : 7259-, 2015

20 Zhao, J., "Selective laser sintering of Si 3 N 4 and Al 2 O 3 ceramic powders" 368–372 : 858-861, 2008

21 Baldock, J. A., "Role of the soil matrix and minerals in protecting natural organic materials against biological attack" 31 (31): 697-710, 2000

22 Chen, T., "Rheological behavior of titania ink and mechanical properties of titania ceramic structures by 3D direct ink writing using high solid loading titania ceramic ink" 783 : 321-328, 2019

23 Ma, X. L., "Research on application of SLA technology in the 3D printing technology" 401–403 : 938-941, 2013

24 이춘만, "Remanufacturing: Trends and Issues" 한국정밀공학회 4 (4): 113-125, 2017

25 Pickering, S. J., "Recycling technologies for thermoset composite materials—current status" 37 (37): 1206-1215, 2006

26 Prechtl, M., "Rapid tooling by laminated object manufacturing of metal foil" 6–8 : 303-312, 2005

27 Rangel, D. P., "Rapid prototyping and 3-D printing of experimental equipment in soil science research" 77 (77): 54-59, 2013

28 Sun, Z., "Preparation of high performance soft magnetic alloy Fe-4Si0.8P by metal injection molding" 28 (28): 2687-2693, 2017

29 Han, J. S., "Powder injection molding of PNN-PMN-PZN doped low temperature sintering PZT ceramics" 28 : 235-242, 2017

30 권주연, "Potentials of Additive Manufacturing with Smart Materials for Chemical Biomarkers in Wearable Applications" 한국정밀공학회 4 (4): 335-347, 2017

31 Ji, S., "Polyester-based ink platform with tunable bioactivity for 3D printing of tissue engineering scaffolds" 7 (7): 560-570, 2019

32 Xie, J., "Planar and 3D deposition of Li 4 Ti 5O 12 thin film electrodes by MOCVD" 287 : 83-88, 2016

33 Kairakbaev, A. K., "Phase composition of heat-insulation materials based on oil-shale wastes" 72 (72): 96-99, 2015

34 Shrotri, S., "Particle deposition and aggregation, measurement, modeling and simulation" 125 (125): 93-94, 1997

35 Elimelech, M., "Particle deposition and aggregation" Cambridge University Press 1998

36 최종한, "Non-Newtonian behavior observed via dynamic rheology for various particle types in energetic materials and simulant composites" 한국유변학회 29 (29): 9-15, 2017

37 Rueschhoff, L. M., "Near-net shaping of silicon nitride via aqueous room-temperature injection molding and pressureless sintering" 43 (43): 10791-10798, 2017

38 Li, X., "Multimaterial 3D printing : multimaterial microfluidic 3D printing of textured composites with liquid inclusions" 6 (6): 1970018-, 2019

39 Verma, A., "Modeling and optimization of direct metal laser sintering process" 77 (77): 847-860, 2015

40 Ma, J., "Model testing of the spatial–temporal evolution of a landslide failure" 76 (76): 323-339, 2017

41 Li, C., "Model testing of the response of stabilizing piles in landslides with upper hard and lower weak bedrock" 204 : 65-76, 2016

42 Zhongliang Lu, "Microstructure control of highly oriented short carbon fibres in SiC matrix composites fabricated by direct ink writing" Elsevier BV 45 (45): 17262-17267, 2019

43 Lu, W., "Micro catalytic methane sensors based on 3D quartz structures with coneshaped cavities etched by high-resolution abrasive sand blasting" 242 : 9-17, 2016

44 Dehghan-Manshadi, A., "Metal injection moulding of titanium and titanium alloys : Challenges and recent development" 319 : 289-301, 2017

45 Wang, W., "Metal injection molding of tungsten and its alloys" 71 (71): 441-444, 2016

46 Tai, Y. S., "Mechanical properties of steel fibre reinforced reactive powder concrete following exposure to high temperature reaching 800 °C" 241 (241): 2416-2424, 2011

47 Yazıcı, H., "Mechanical properties of reactive powder concrete containing mineral admixtures under different curing regimes" 23 (23): 1223-1231, 2009

48 Li, W., "Mechanical properties of basalt fibre reinforced geopolymeric concrete under impact loading" 505 (505): 178-186, 2009

49 Parthasarathy, J., "Mechanical evaluation of porous titanium(Ti6Al4V)structures with electron beam melting(EBM)" 3 (3): 249-259, 2010

50 Adrian S Sabau, "Material properties for predicting wax pattern dimensions in investment casting" Elsevier BV 362 (362): 125-134, 2003

51 Hao, L., "Material characterisation and process development for chocolate additive layer manufacturing" 5 (5): 57-64, 2010

52 Yan, Y., "Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition" 57 (57): 2623-2628, 2003

53 Gosselin, C., "Large-scale 3D printing of ultrahigh performance concrete—a new processing route for architects and builders" 100 : 102-109, 2016

54 Gomes, C. M., "Laminated Object Manufacturing (LOM) of glass ceramics substrates for LTCC applications" CRC Press 748-, 2010

55 Nadine Madanchi, "Investigation on the effects of nanoparticles on cutting fluid properties and tribological characteristics" 한국정밀공학회 6 (6): 433-447, 2019

56 Tang, D., "Investigation of wax-based barite slurry and deposition for 3D printing landslide model" 108 : 99-106, 2018

57 Zafar, A., "Investigation of the ageing effects on phenol-urea-formaldehyde binder and alkanol amine-acid anhydride binder coated mineral fibres" 98 (98): 339-347, 2013

58 He, Z, "Inkjet 3D printing of clay ceramics for water treatment" 3 (3): 215-219, 2018

59 Patricia Gómez, "Influence of the Material Composition on the Environmental Impact of Ceramic Glasses" 한국정밀공학회 7 (7): 431-442, 2020

60 Elshafie, S., "Influence of mineral admixtures on the mechanical properties of fresh and hardened concrete" 19 (19): 4-12, 2017

61 Kafara, M., "Influence of binder quantity on dimensional accuracy and resilience in 3D-printing" 21 : 638-646, 2018

62 Kim, B. -S., "Incorporation of BMP-2 nanoparticles on the surface of a 3D-printed hydroxyapatite scaffold using an ε-polycaprolactone polymer emulsion coating method for bone tissue engineering" 170 : 421-429, 2018

63 Simon, J. L., "In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing" 83A (83A): 747-758, 2007

64 추원식, "Hybrid Manufacturing in Micro/Nano Scale: A Review" 한국정밀공학회 1 (1): 75-92, 2014

65 Russias, J., "Hot pressed titanium nitride obtained from SHS starting powders : Influence of a pre-sintering heat-treatment of the starting powders on the densification process" 27 (27): 327-335, 2007

66 Fu, K., "Graphene oxide-based electrode inks for 3D-printed lithium–ion batteries" 28 (28): 2587-2594, 2016

67 Elsayed, H., "Glass powders and reactive silicone binder : Interactions and application to additive manufacturing of bioactive glass-ceramic scaffolds" 45 (45): 13740-13746, 2019

68 Chen, B., "Fully packaged carbon nanotube supercapacitors by direct ink writing on flexible substrates" 9 (9): 28433-28440, 2017

69 Varsha Khare, "From 3D to 4D Printing – Design, Material and Fabrication for Multi-Functional Multi-Materials" 한국정밀공학회 4 (4): 291-299, 2017

70 Larisa, U., "Fibre-reinforced concrete with mineral fibres and nanosilica" 195 : 147-154, 2017

71 Ji, D., "Facile fabrication of MOF-derived octahedral CuO wrapped 3D graphene network as binder-free anode for high performance lithium-ion batteries" 313 : 1623-1632, 2017

72 Wang, M., "Fabrication of light, flexible and multifunctional graphene nanoribbon fibres via a 3D solution printing method" 27 (27): 465702-, 2016

73 Di, Z., "Fabrication of highly conductive graphene flexible circuits by 3D printing" 217 : 79-86, 2016

74 Lacey, S. D., "Extrusion-based 3D printing of hierarchically porous advanced battery electrodes" 30 (30): 1705651-, 2018

75 Chen, H., "Evaluation and design of fibre-reinforced asphalt mixtures" 30 (30): 2595-2603, 2009

76 Skalka, P., "Estimation of the effective elastic constants of bone scaffolds fabricated by direct ink writing" 39 (39): 1586-1594, 2019

77 Bosscher, P., "Erratum to ‘Cable-suspended robotic contour crafting system" 17 (17): 513-, 2008

78 Sullivan, K. T., "Electrophoretic deposition of thermites onto micro-engineered electrodes prepared by direct-ink writing" 117 (117): 1686-1693, 2013

79 Peltola, P., "Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay-reinforced polypropylene nanocomposites" 46 (46): 995-1000, 2006

80 Adamu, M., "Effect of polycarboxylate superplasticizer dosage on the mechanical performance of roller compacted rubbercrete for pavement applications" 12 (12): 5253-5260, 2017

81 Ahmad, F. N., "Effect of particle shape of silica mineral on the properties of epoxy composites" 68 (68): 346-353, 2008

82 Luyt, A. S., "Effect of oxidized paraffin wax on the thermal and mechanical properties of linear lowdensity polyethylene–layered silicate nanocomposites" 26 (26): 461-470, 2007

83 Singh, S., "Effect of mineral admixtures on fresh, mechanical and durability properties of RAP inclusive concrete" 156 : 19-27, 2017

84 Montoro, M. A., "Effect of ion type and concentration on rheological properties of natural sodium bentonite dispersions at low shear rates" 178 : 105132-, 2019

85 사민우, "Effect of Various Blending Ratios on the Cell Characteristics of PCL and PLGA Scaffolds Fabricated by Polymer Deposition System" 한국정밀공학회 14 (14): 649-655, 2013

86 Puget, P., "Dynamics of soil organic matter associated with particle-size fractions of waterstable aggregates" 51 (51): 595-605, 2000

87 Wang, J., "Dynamic rheological study of paraffin wax and its organoclay nanocomposites" 108 (108): 2564-2570, 2008

88 Corinaldesi, V., "Durable fibre reinforced self-compacting concrete" 34 (34): 249-254, 2004

89 Nurul Farhanah Azman, "Dispersion Stability and Lubrication Mechanism of Nanolubricants: A Review" 한국정밀공학회 6 (6): 393-414, 2019

90 Wang, R., "Direct-writing of 3D periodic TiO2 bio-ceramic scaffolds with a sol–gel ink for in vitro cell growth" 144 : 304-309, 2018

91 Jayathilakage, R., "Direct shear test for the assessment of rheological parameters of concrete for 3D printing applications" 52 (52): 12-, 2019

92 Wang, X. C., "Direct selective laser sintering of hard metal powders : experimental study and simulation" 19 (19): 351-357, 2002

93 Lewis, J. A., "Direct ink writing of three-dimensional ceramic structures" 89 (89): 3599-3609, 2006

94 Fu, Q., "Direct ink writing of highly porous and strong glass scaffolds for load-bearing bone defects repair and regeneration" 7 (7): 3547-3554, 2011

95 Young, A. J., "Direct ink writing of catalytically active UiO-66 polymer composites" 55 (55): 2190-2193, 2019

96 Zocca, A., "Direct ink writing of a preceramic polymer and fillers to produce hardystonite(Ca 2 ZnSi 2 O 7)bioceramic scaffolds" 99 (99): 1960-1967, 2016

97 Lewis, J. A., "Direct ink writing of 3D functional materials" 16 (16): 2193-2204, 2006

98 Sun, Q., "Direct ink writing of 3D cavities for direct plated copper ceramic substrates with kaolin suspensions" 45 (45): 12535-12543, 2019

99 Lim, S., "Developments in construction-scale additive manufacturing processes" 21 (21): 262-268, 2012

100 Maji, S., "Development of gelatin/carboxymethyl chitosan/nano-hydroxyapatite composite 3D macroporous scaffold for bone tissue engineering applications" 189 : 115-125, 2018

101 Mireles, J., "Development of a fused deposition modeling system for low melting temperature metal alloys" 135 (135): 011008-, 2013

102 Woodfield, T. B. F., "Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fibredeposition technique" 25 (25): 4149-4161, 2004

103 Cong Hong Phong Nguyen, "Design for Additive Manufacturing of Functionally Graded Lattice Structures: A Design Method with Process Induced Anisotropy Consideration" 한국정밀공학회 8 (8): 29-45, 2021

104 Kumar, P., "Design and fabrication of powder based binder jetting 3D printing" 3 (3): 142-150, 2017

105 Atta Ur Rehman Shah, "Current Advances in the Fire Retardancy of Natural Fiber and Bio-Based Composites – A Review" 한국정밀공학회 4 (4): 247-262, 2017

106 Qinglei Sun, "Creation of three-dimensional structures by direct ink writing with kaolin suspensions" Royal Society of Chemistry (RSC) 6 (6): 11392-11400, 2018

107 Khoshnevis, B., "Contour crafting. Rapid prototyping Vol. 6" Springer, MA Press 221-251, 2006

108 Bijwe, J., "Composites as friction materials : Recent developments in non-asbestos fibre reinforced friction materials—a review" 18 (18): 378-396, 1997

109 Treppo, S., "Comparison of biomechanical and biochemical properties of cartilage from human knee and ankle pairs" 18 (18): 739-748, 2000

110 Russel, W. B., "Colloidal dispersion Vol. 37, Vol. 5" Butterworth-Heinemann Press 1981

111 Tyge, E., "Characterizing digital light processing(DLP)3D printed primitives" 9127 : 302-313, 2015

112 Oliveira, R. V. B., "Ceramic injection moulding : Influence of specimen dimensions and temperature on solvent debinding kinetics" 160 (160): 213-220, 2005

113 Cesaretti, G., "Building components for an outpost on the Lunar soil by means of a novel 3D printing technology" 93 (93): 430-450, 2014

114 Chang, Y., "Blood-inert surfaces via ion-pair anchoring of zwitterionic copolymer brushes in human whole blood" 23 (23): 1100-1110, 2013

115 이훈, "Bio-Inspired Adhesive Systems for Next-Generation Green Manufacturing" 한국정밀공학회 1 (1): 347-351, 2014

116 Murat, M., "Behavior of E-glass fibre in basic aqueous medium resulting from the dissolution of mineral binders containing metakaolinite" 19 (19): 16-24, 1989

117 Liu, Q., "Assessing the dynamic extrusion-based 3D printing process for power-law fluid using numerical simulation" 275 : 109861-, 2020

118 문승기, "Application of 3D Printing Technology for Designing Light-weight Unmanned Aerial Vehicle Wing Structures" 한국정밀공학회 1 (1): 223-228, 2014

119 Wang, Y. E., "Analysis to effective elastic modulus and porosity for artificial bone scaffold with hydroxyapatite microspheres" 424–425 : 241-245, 2012

120 Rajabi, J., "Advantages and limitations of using nano sized powders for powder injection molding process : a review" 59 (59): 137-140, 2012

121 Rueschhoff, L., "Additive manufacturing of dense ceramic parts via direct ink writing of aqueous alumina suspensions" 13 (13): 821-830, 2016

122 Bos, F., "Additive manufacturing of concrete in construction : potentials and challenges of 3D concrete printing" 11 (11): 17-, 2016

123 Ning, F., "Additive manufacturing of carbon fibre reinforced thermoplastic composites using fused deposition modeling" 80 : 369-378, 2015

124 Grasso, S., "A review of cold sintering processes" 119 (119): 115-143, 2020

125 Paul, S. C., "A review of 3D concrete printing systems and materials properties : current status and future research prospects" 24 (24): 784-798, 2018

126 Miyanaji, H., "A preliminary study of the graded dental porcelain ceramic structures fabricated via binder jetting 3D printing" 578-589, 2014

127 Le-Hua, C., "A novel selection method of scanning step for fabricating metal components based on micro-droplet deposition manufacture" 56 : 50-58, 2012

128 Guo, X., "A novel method for preparation of interconnected poregradient ceramic foams by gelcasting" 19 (19): 853-858, 2012

129 Liao, Y. S., "A new approach of online waste removal process for laminated object manufacturing (LOM)" 140 (140): 136-140, 2003

130 Ganci, M., "A macroscale FEM-based approach for selective laser sintering of thermoplastics" 91 (91): 1-12, 2017

131 Shen, C., "A highperformance three-dimensional micro supercapacitor based on self-supporting composite materials" 196 (196): 10465-10471, 2011

132 Chee Meng Benjamin Ho, "A Review on 3D Printed Bioimplants" 한국정밀공학회 16 (16): 1035-1046, 2015

133 Mizuno, J., "A Double-sided in-plane lateral comb-drive actuator fabricated by a plaster-based 3D-printer" 656–657 : 594-599, 2015

134 Son Thai Ly, "4D Printing – Fused Deposition Modeling Printing with Thermal-Responsive Shape Memory Polymers" 한국정밀공학회 4 (4): 267-272, 2017

135 Tayebi, L., "3D-printed membrane for guided tissue regeneration" 84 : 148-158, 2018

136 Buswell, R. A., "3D printing using concrete extrusion : A roadmap for research" 112 : 37-49, 2018

137 Asprone, D., "3D printing of reinforced concrete elements : Technology and design approach" 165 : 218-231, 2018

138 Egorov, A. A., "3D printing of mineralpolymer bone substitutes based on sodium alginate and calcium phosphate" 7 : 1794-1799, 2016

139 Fedotov, A. Y., "3D printing of mineral-polymer structures based on calcium phosphate and polysaccharides for tissue engineering" 7 (7): 240-243, 2016

140 Kokkinis, D., "3D printing of materials with tunable failure via bioinspired mechanical gradients" 30 (30): 1705808-, 2018

141 Revelo, C. F., "3D printing of kaolinite clay ceramics using the Direct Ink Writing(DIW)technique" 44 (44): 5673-5682, 2018

142 Luo, Y., "3D printing of concentrated alginate/gelatin scaffolds with homogeneous nano apatite coating for bone tissue engineering" 146 : 12-19, 2018

143 Yu, W., "3D printing of carbon nanotubes-based microsupercapacitors" 9 (9): 4597-4604, 2017

144 Compton, B. G., "3D printing : 3D-printing of lightweight cellular composites" 26 (26): 6043-, 2014

145 O’Neill, S. J., "3D print a home on Mars" 226 (226): 27-27, 2015

146 Mandal, S., "3D powder printed tetracalcium phosphate scaffold with phytic acid binder : fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure" 29 (29): 29-, 2018

147 Yang, J., "3D porous LiFePO 4/graphene hybrid cathodes with enhanced performance for Li-ion batteries" 208 (208): 340-344, 2012

148 Huang, Z. X., "3D graphene supported MoO2 for high performance binder-free lithium ion battery" 6 (6): 9839-9845, 2014

149 Shkarina, S., "3D biodegradable scaffolds of polycaprolactone with silicate-containing hydroxyapatite microparticles for bone tissue engineering : high-resolution tomography and in vitro study" 8 (8): 8907-, 2018

150 Abhishek Sharma, "3D Printing: It’s Microfluidic Functions and Environmental Impacts" 한국정밀공학회 4 (4): 323-334, 2017

151 Haining Zhang, "3D Printed Electronics of Non-contact Ink Writing Techniques: Status and Promise" 한국정밀공학회 7 (7): 511-524, 2020

152 Eftekhari, A., "3D Deposition of LiMn 2 O 4 : Enhancement of lithium battery performance" 161 (161): 41-47, 2003