경험모델을 이용한 충격기류식 여과집진기의 적정 탈진압력 예측 = The Prediction of Optimal Pulse Pressure Drop by Empirical Static Model in a Pulsejet Bag Filter

다국어 초록 (Multilingual Abstract)

A pilot-scale pulse-jet bagfilter was designed, built and tested for the effects of four operating conditions (filtration velocity, inlet dust concentration, pulse pressure, and pulse interval time) on the total system pressure drop, using coke dust from a steel mill factory. Two models were used to predict the total pressure drop according to the operating conditions. These model parameters were estimated from the 180 experimental data points. The empirical model (EM) with filtration velocity, areal density, inlet dust concentration, pulse interval time and pulse pressure shows the best correlation coefficient (R=0.971) between experimental data and model predictions. The empirical model was used as it showed higher correlation coefficient (R=0.971) compared to that of the Multivariate linear regression(MLR) (R=0.961). The minimum pulse pressure predicted by empirical model (EM) was 5kg/㎠.

참고문헌 (Reference)

1 서정민, "충격기류식 여과집진장치의 펄스간격 및 분사거리에 따른 압력손실변화에 관한 기초 연구" 한국환경과학회 13 (13): 223-232, 2004

2 류재용, "충격기류식 여과집진장치에서 운전조건 변화로 인한 여과저항에 관한 연구[Ⅰ]" 한국환경과학회 16 (16): 449-458, 2007

3 서정민, "충격기류식 여과집진장치에서 압력손실에 영향을 주는 인자의 효율예측" 한국환경과학회 19 (19): 437-446, 2010

4 Leith, D., "Theory for pressure drop in a pulse-jet cleaned fabric filter" 14 (14): 845-852, 1980

5 Doring, N., "The influence of cake residence time on the Table operation of a high-temperature gas filter" 64 (64): 2483-2490, 2009

6 Ellenbecker, M. J., "The effect of dust retention on pressure drop in a high velocity pulse-jet fabric filter" 25 (25): 147-154, 1980

7 Dean, A. H., "Survey on the use of pulse-jet fabric filters for coal-fired utility and industrial boilers" 38 (38): 90-96, 1988

8 Strangert, S., "Predicting performance of bag filters" 15 (15): 42-48, 1978

9 Hsin-Chung, L. U., "Numerical and experimental study of cleaning process of a pulsejet fabric filtration system" 30 (30): 3243-3249, 1996

10 Allen, R. W. K, "Modelling media movement during cleaning of pulse-jet fabric filters" 77 (77): 223-230, 1999

11 Koehler, J. L., "Model calibration for pressure drop in a pulse-jet cleaned fabric filter" 17 (17): 1909-1913, 1983

12 Jeong-Min Suh, "Influence of pulsing-air injection distance on pressure drop in a coke dust bagfilter" 한국화학공학회 28 (28): 613-619, 2011

13 Hindy, K. T., "Influence of cloth structure on operational characteristics of pulse-jet cleaned filter bags" 13 (13): 175-181, 1987

14 Peukert, W., "Industrial separation of fine particles with difficult dust properties" 118 (118): 136-148, 2001

15 Ju, J., "Further work on pulse-jet fabric filtration modeling" 118 (118): 79-89, 2001

16 Simon, X., "Experimental study of pulse-jet cleaning of bag filters supported by rigid rings" 172 (172): 67-81, 2007

17 Calle, S., "Evolutions of efficiency and pressure drop of filter media during clogging and cleaning cycles" 128 (128): 213-217, 2002

18 Park, S. J., "Effects of a shroud tube on flow field and particle behavior inside a bag-filter vessel" 37 (37): 685-693, 2003

19 서정민, "Effects of Operating Conditions on Pressure Drop in a Pulse-Jet Bagfilter for Coke Dust" TAYLOR & FRANCIS INC 45 (45): 1228-1239, 2010

20 Tsai, C. J., "Effect of filtration velocity and filtration pressure drop on the bag-cleaning performance of a pulse-jet baghouse" 35 (35): 211-226, 2000

21 Gabites, J. R., "Design of baghouses for fines collection in milk powder plants" 187 (187): 46-52, 2008

22 Liu, D. H. F, "Air pollution: Environmental Engineers' Handbook, 2nd Ed" Lewis Publishers (CRC Press) 1997