Investigation the fracture behavior of high-density polyethylene PE80 weakened by inclined U-notch with end hole

다국어 초록 (Multilingual Abstract)

In this article, the Strain Energy Density (SED) averaged over a well-defined control volume at a notch edge was applied in combination with the Equivalent Material Concept (EMC) to assess the fracture behaviors of some keyhole-notched specimens made of a High-Density Polyethylene (HDPE-PE80) material under mixed-mode loading conditions. An experimental program was performed and 54 new experimental data were totally provided. Additionally, different loading mode ratios were regarded by changing the inclination angles of the notches with respect to the applied load directions. The results obtained from the determined criteria were in good agreement with those of the experimental data.

참고문헌 (Reference)

1 Salavati, H., "The mechanism-based strain gradient plasticity theory to model the hot deformation behavior of functionally graded steels" 51 : 627-641, 2014

2 Salavati, H., "The flow stress assessment of austenitic-martensitic functionally graded steel under hot compression" 2 : 83-90, 2014

3 Wang, J., "The effects of notch width on the SENB toughness for oxide ceramics" 10 : 21-31, 1992

4 Torabi, A., "The Equivalent Material Concept : Application to Failure of O-Notches" 1 : 129-140, 2013

5 Mori K, "Tension of a semi-infinite plate with a circular hole connected to the straight edge by a slit" 7 : 272-277, 1964

6 Nui, L. S., "Stress field near a large blunted tip V-notch and application of the concept of the critical notch stress intensity factor(NSIF)to the fracture toughness of very brittle materials" 49 : 325-335, 1994

7 Atzori, B., "Stress distributions in notched structural components under pure bending and combined traction and bending" 28 : 13-23, 2005

8 Atzori, B., "Stress distributions for V-shaped notches under tensile and bending loading" 20 : 1083-1092, 1997

9 Torabi, R., "Strain energy density to assess mode II fracture in U-notched disk-type graphite plates" 23 : 917-930, 2014

10 Lazzarin, P., "Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches" 135 : 161-185, 2005

11 Lazzarin, P., "Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches" 135 : 161-185, 2005

12 Berto, F., "Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches" 75 : 1-48, 2014

13 Campagnolo, A., "Rapid finite element evaluation of the averaged strain energy density of mixed-mode(I + II)crack tip fields including the T-stress contribution" 39 : 982-998, 2016

14 Lazzarin, P., "Rapid calculations of notch stress intensity factors based on averaged strain energy density from coarse meshes : theoretical bases and applications" 32 : 1559-1567, 2010

15 Mohammadi, H., "Prevalent mode II fracture assessment of inclined U-notched specimens made of tungsten-copper functionally graded material" 89 : 90-99, 2017

16 Salavati, H., "Prediction the Charpy impact energy of functionally graded steels" 2 : 21-28, 2013

17 Frank, A., "Prediction of the remaining lifetime of polyethylene pipes after up to 30 years in use" 28 : 737-745, 2009

18 Torabi, A. R, "On the Ability of the Equivalent Material Concept in Predicting Ductile Failure of U-Notches under Moderate-and Large-Scale Yielding Conditions" 18 : 337-347, 2015

19 Torabi, A. R., "Mixed-mode ductile failure analysis of V-notched Al7075-T6 thin sheets" 150 : 70-75, 2015

20 A.R. Torabi, "Mixed mode fracture assessment of U-notched graphite Brazilian disk specimens by means of the local energy" 국제구조공학회 50 (50): 723-740, 2014

21 Mohammadi, H., "Local strain energy density to predict mixed mode I + II fracture in specimens made of functionally graded materials weakened by V-notches with end holes" 92 : 47-58, 2017

22 Salavati, H., "Local strain energy density applied to bainitic functionally graded steels plates under mixed mode(I+II)loading" 28 : 164-172, 2015

23 Zappalorto, M., "In-plane and out-of-plane stress field solutions for V-notches with end holes" 168 : 167-180, 2011

24 Zappalorto, M., "In-plane and out-of-plane stress field solutions for V-notches with end holes" 168 : 167-180, 2011

25 Gogotsi, G. A., "Fracture toughness of ceramics and ceramic composites" 29 : 777-784, 2003

26 Mohammadi, H., "Fracture investigation of V-notch made of tungsten-copper functionally graded materials" 20 : 457-464, 2017

27 Mosaddeghi, M. R., "Fracture investigation of U-notched specimen made of cooper- steel functionally graded material under mode I loading" 17 : 1-9, 2017

28 Mohammadi, H., "Fracture investigation of U-notch made of tungsten-copper functionally graded materials by means of strain energy density" 40 : 1984-1993, 2017

29 Berto, F., "Fracture behaviour of notched round bars made of PMMA subjected to torsion at room temperature" 90 : 143-160, 2012

30 Strandberg, M., "Fracture at V-notches with contained plasticity" 69 : 403-415, 2002

31 Salavati, H., "Fracture assessment of notched bainitic functionally graded steels under mixed mode(I + II)Loading" 18 : 307-325, 2015

32 Salavati, H., "Fracture assessment of inclined double keyhole notches in isostatic graphite" 21 : 110-116, 2018

33 Salavati, H., "Fracture assessment of V-notched specimens with end holes made of tungsten-copper functionally graded material under mode I loading" 357-367, 2017

34 Berto, F., "Fracture assessment of U-notches under mixed mode loading : two procedures based on the ‘equivalent local mode I’ concept" 148 : 415-433, 2007

35 Anderson, L., "Fracture Mechanics: Fundamentals and Applications" CRC Press LLC 1995

36 Berto, F., "Fictitious notch rounding concept applied to V-notches with root holes subjected to in-plane shear loading" 79 : 281-294, 2012

37 Yosibash, Z., "Failure criteria for brittle elastic materials" 125 : 307-333, 2004

38 Glinka, G., "Energy density approach to calculation of inelastic strain-stress near notches and cracks" 22 : 485-508, 1985

39 Torabi, A. R., "Elastic-plastic fracture analysis of notched Al7075-T6 plates by means of the local energy combined with the equivalent material concept" 19 : 204-214, 2016

40 Creager, M., "Elastic field equations for blunt cracks with reference to stress corrosion cracking" 3 : 247-252, 1967

41 Filippi, S., "Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates" 39 : 4543-4565, 2002

42 Pook, P., "Coupled fracture mode of a cracked plate under anti-plane loading" 134 : 391-403, 2015

43 Seweryn, A., "Brittle fracture criterion for structures with sharp notches" 47 : 673-681, 1994

44 Lazzarin, P., "Brittle failure of inclined key-hole notches in isostatic graphite under in-plane mixed mode loading" 36 : 942-955, 2013

45 Behnam Saboori, "Averaged strain energy density to assess mixed mode I/III fracture of U-notched GPPS samples" 국제구조공학회 65 (65): 699-706, 2018

46 Irwin, G. R., "Analysis of stresses and strain near the end of a crack transversing a plate" 24 : 361-364, 1957

47 Lazzarin, P., "A unified approach to the evaluation of linear elastic stress fields in the neighborhood of cracks and notches" 78 : 3-19, 1996

48 Salavati, H., "A new expression to evaluate the critical fracture load for bainitic functionally graded steels under mixed mode(I + II)loading" 48 : 121-136, 2015

49 Glinka, G., "A method of elastic-plastic stress and strain calculation at a notch root" 50 : 93-100, 1981

50 Lazzarin, P., "A generalized stress intensity factor to be applied to rounded V-shaped notches" 43 : 2461-2478, 2006

51 Lazzarin, P., "A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches" 112 : 275-298, 2001

52 Knésl, Z., "A criterion of V-notchstability" 48 : R79-R83, 1991