진공펌프의 배기성능 지표들을 정량적으로 측정하기 위해서 사용하는 표준용기에 관한 ISO 규격은 기체도입 도관의 굵기를 용기 내경의 10분의 1로 규정하고 있다. 표준용기 내경은 검사 대...
http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
https://www.riss.kr/link?id=A103605923
2010
Korean
KCI등재,SCOPUS,ESCI
학술저널
161-168(8쪽)
1
0
상세조회0
다운로드국문 초록 (Abstract)
진공펌프의 배기성능 지표들을 정량적으로 측정하기 위해서 사용하는 표준용기에 관한 ISO 규격은 기체도입 도관의 굵기를 용기 내경의 10분의 1로 규정하고 있다. 표준용기 내경은 검사 대...
진공펌프의 배기성능 지표들을 정량적으로 측정하기 위해서 사용하는 표준용기에 관한 ISO 규격은 기체도입 도관의 굵기를 용기 내경의 10분의 1로 규정하고 있다. 표준용기 내경은 검사 대상 펌프의 흡기구 직경보다 작아서는 안 되므로 만일 대용량 펌프에 맞춘다면 때에 따라 도관의 굵기가 100 mm라는 수치도 나올 수 있다. 전체 시스템의 크기가 커지는 만큼 이런 굵기의 도관도 수용이 가능하기는 하지만 과연 이렇게 굵은 도관이 정밀한 측정을 위해 꼭 필요한지 또는 오히려 방해가 되는 것은 아닌지 검토해 볼 필요성이 있다. 본 논문에서는 도관 굵기에 따라, 도관출구를 빠져나오는 입자들과 오리피스 및 펌프 흡기구에 입사하는 입자들의 등방성에 대해 살펴봄으로써 적절한 도관 굵기가 존재하는지에 대해 논의한다.
다국어 초록 (Multilingual Abstract)
The ISO standard specifies the diameter of the gas introducing tube to be definitely 1/10 of the chamber inner diameter of the standard test dome which is used for evaluating the performance of vacuum pumps. Because the inner diameter of the test cham...
The ISO standard specifies the diameter of the gas introducing tube to be definitely 1/10 of the chamber inner diameter of the standard test dome which is used for evaluating the performance of vacuum pumps. Because the inner diameter of the test chamber should not be less than the intake diameter of the vacuum pump, the tube diameter would be even 100 mm if fitting to a very large vacuum pump. Though such a thick tube can be accommodated in a large test dome, it is worthful to investigate whether a thicker tube is helpful or adverse for making more accurate measurements. In this paper it is discussed if there is an optimum tube diameter by comparing the isotropicity of particles emanating from the tube and that of particles entering the orifice.
참고문헌 (Reference)
1 B. R. F. Kendall, 7 : 2043-, 1989
2 M. H. Hablanian, 5 : 2552-, 1987
3 "터보分子펌프性能試驗方法, JVIS 005 (1991)"
4 인상렬, "진공표준용기에서 진공계위치에 대한 고찰" 4 (4): 1-5, 1995
5 "Vacuum Technology-Standard Methods for Measuring Vacuum-pump Performance-General Description, ISO 21360 (2007)"
6 "Vacuum Pumps Acceptance Specifications Part III(TMP), PNEUROP 5608 (1973)"
7 "Vacuum Pumps Acceptance Specifications Part II(DP), PNEUROP 5607 (1972)"
1 B. R. F. Kendall, 7 : 2043-, 1989
2 M. H. Hablanian, 5 : 2552-, 1987
3 "터보分子펌프性能試驗方法, JVIS 005 (1991)"
4 인상렬, "진공표준용기에서 진공계위치에 대한 고찰" 4 (4): 1-5, 1995
5 "Vacuum Technology-Standard Methods for Measuring Vacuum-pump Performance-General Description, ISO 21360 (2007)"
6 "Vacuum Pumps Acceptance Specifications Part III(TMP), PNEUROP 5608 (1973)"
7 "Vacuum Pumps Acceptance Specifications Part II(DP), PNEUROP 5607 (1972)"
태양전지응용을 위하여 MOCVD 방법으로 성장된 ZnO 박막의 기판온도에 따른 표면특성
2개의 형광 도판트를 적용한 단일발광층 유기발광소자의 광학적 특성 연구
450 mm 웨이퍼 공정용 System의 기하학적 구조에 따른 플라즈마 균일도 모델링 분석
학술지 이력
연월일 | 이력구분 | 이력상세 | 등재구분 |
---|---|---|---|
2022 | 평가예정 | 계속평가 신청대상 (등재유지) | |
2017-01-01 | 평가 | 우수등재학술지 선정 (계속평가) | |
2014-06-16 | 학술지명변경 | 한글명 : Applied Science and Convergence Technology -> 한국진공학회지 | ![]() |
2014-02-06 | 학술지명변경 | 한글명 : ASCT -> Applied Science and Convergence Technology | ![]() |
2014-02-05 | 학술지명변경 | 한글명 : 한국진공학회지 -> ASCT외국어명 : Journal of the Koren Vacuum Society -> Applied Science and Convergence Technology | ![]() |
2014-01-01 | 학술지명변경 | 한글명 : 한국진공학회지 -> Applied Science and Convergence Technology | ![]() |
2013-01-01 | 평가 | 등재학술지 유지 (등재유지) | ![]() |
2010-01-01 | 평가 | 등재학술지 유지 (등재유지) | ![]() |
2008-01-01 | 평가 | 등재학술지 유지 (등재유지) | ![]() |
2005-05-23 | 학술지명변경 | 외국어명 : Journal of the Koren Cacuum Society -> Journal of the Koren Vacuum Society | ![]() |
2005-01-01 | 평가 | 등재학술지 선정 (등재후보2차) | ![]() |
2004-01-01 | 평가 | 등재후보 1차 PASS (등재후보1차) | ![]() |
2003-01-01 | 평가 | 등재후보학술지 선정 (신규평가) | ![]() |
학술지 인용정보
기준연도 | WOS-KCI 통합IF(2년) | KCIF(2년) | KCIF(3년) |
---|---|---|---|
2016 | 0.12 | 0.12 | 0.15 |
KCIF(4년) | KCIF(5년) | 중심성지수(3년) | 즉시성지수 |
0.13 | 0.1 | 0.328 | 0.03 |