동시 증착 스퍼터링 공정에 의해 증착된 Pd-barium zirconate membrane의 구조분석 = Structural properties of Pd-barium zirconate dense membrane synthesized by dual sputtering method

다국어 초록 (Multilingual Abstract)

Barium zirconate exhibits good thermo-chemical stability and proton conduction at high temperatures, but shows poor electron conductivity. Therefore, for high efficiency of hydrogen separation, a very thin and dense Pd-Barium zirconate membrane has to be coated on a porous substrate. A thin and dense Pd-Barium zirconate membrane was successfully synthesized on a porous substrate by means of dual sputtering method. The structural and chemical features of the $BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membranes sputtered at $300^{\circ}C$ and $400^{\circ}C$ were investigated by X-ray diffractometry, and it was found that a well-crystallized membrane, Pm-3m space group of $BaZrO_3$, was synthesized. The surface and cross-sectional morphologies of membrane were assessed by SEM (scanning electron microscopy) and TEM(transmission electron microscopy) of the surface and of cross sections. The cross sectional observation of Pd-$BaZr_{0.85}Y_{0.15}O_{3-{\delta}}$ membrane by dual sputtering shows that the coating is quite dense with columnar structure.

참고문헌 (Reference)

1 김대희, "Y-doped BaZrO3에서의 산소 공공과 프로톤의 이동" 한국세라믹학회 46 (46): 695-699, 2009

2 H. Iwahara, "Technological challenges in the application of proton conducting ceramics" 77 : 289-, 1995

3 H. Limage, "Study of the effect of a silver nanoparticle seeding layer on the crystallisation temperature, photoinduced hydrophylic and catalytic properties of TiO2 thin films deposited on glass by magnetron sputtering" 205 (205): 3774-, 2011

4 Z. Zhong, "Stability and conductivity study of the BaCe0.9 −. XZrXY0.1O2.95 systems" 178 : 213-, 2007

5 K. Katahira, "Protonic conduction in Zr-substituted BaCeO3" 138 (138): 91-, 2000

6 W.G. Coors, "Protonic ceramic fuel cells for high-efficiency operation with methane" 118 : 150-, 2003

7 K.D. Kreuer, "Proton-conducting oxides" 33 : 333-, 2003

8 I. Levin, "Phase equilibria, crystal structures, and dielectric anomaly in the BaZrO3-CaZrO3 system" 175 (175): 170-, 2003

9 J. O’'Brien, "Pd/Ag membranes on porous alumina substrates by unbalanced magnetron sputtering" 142 : 253-, 2001

10 W. Chen, "On the assembling of Pd/ceramic composite membranes for hydrogen separation" 72 : 92-, 2010

11 F. Iguchi, "Microstructures and grain boundary conductivity of BaZr1 −. XYXO3 (X = 0.05, 0.10, 0.15) ceramics" 178 (178): 691-, 2007

12 G. Zhang, "Interfacial resistances of Ni-BCY mixed-conducting membranes for hydrogen separation" 159 : 121-, 2003

13 김성현, "Formation of a defect-free Pd-Cu-Ni ternary alloy membrane on a polished porous nickel support (PNS)" ELSEVIER SCIENCE BV 318 (318): 346-354, 200806

14 M.A.P. Yazdi, "Electrical and structural investigations of perovskite structure reactively sputter deposited coatings" 180 : 1246-, 2009

15 R. Thomas, "Effect of substrate temperature on the crystallization of Pb(Zr,Ti)O3 films on Pt/Ti/Si substrates prepared by radio frequency magnetron sputtering with a stoichiometric oxide target" 95 (95): 36-, 2002

16 Y. Kuru, "Coefficients of thermal expansion of thin metal films investigated by non-ambient X-ray diffraction stress analysis" 202 : 2306-, 2008