빠른 속도의 우주먼지 모사를 위한 레이저기반의 입자가속에 관한 실험적 연구

국문 초록 (Abstract)

현재 자연적 또는 인공적으로 늘어난 지구 주위의 수많은 미세 입자들은 인공위성에 위협이 되고 있으며 인공위성과 우주 먼지간의 충돌 속도는 수 ㎞/s에 이른다. 본 연구에서 는 이러한 우주 먼지를 모사하기 위하여 작은 금속판을 레이저를 이용하여 가속하였다. 기존 연구에서는 다중코팅을 이용하여 속도 효율을 향상시켰으나 코팅하는데 시간과 비용이 많이 드는 단점이 있었다. 본 연구에서는 그러한 다중코팅 대신 단순한 검은색 페인트를 이용하여 코팅을 하지 않았을 때보다 1.5~2배 정도의 속도향상을 보였으며 Nd:YAG 레이저를 이용하여 1.4J이하에서 최대 1.42㎞/s의 속도를 얻었다. 이 속도는 정지궤도에서의 인공위성과 우주먼지 충돌을 모사하는데 적합하다.

다국어 초록 (Multilingual Abstract)

Increasing numbers of space debris around the earth now pose a major threat to satellites as their impact velocity may reach up to several ㎞/s. We use a pulse laser to accelerate a miniflyer for mimicking the space debris. The multi-layer coat on the confined medium is known to promote a higher acceleration. However, it requires some special techniques which take somewhat long time and cost to coat. Instead, we devised a simple concept to coat by the black lacquer paint on a flyer. It shows improvement in the flyer velocity by 1.5-2 times the uncoated, and the resulting velocity reached 1.42km/s with Nd:YAG laser energy under 1.4 joules. The resulting velocity is suitable for satellite vulnerability test for debris impact in the geostationary orbit.

목차 (Table of Contents)

• ABSTRACT
• 초록
• Ⅰ. 서론
• Ⅱ. 본론
• Ⅲ. 결론
• References

참고문헌 (Reference)

1 Stein, C., CNES Publication 2000

2 Walker, R., "Update of the ESA Space Debris Mitigation Handbook"

3 Stahl, D. B., "US Patent No. 5,301,612"

4 Lawrence, R. J., "Theoretical analysis of a pulsed-laser-driven hypervelocity flyer launcher" 14 : 439-449, 1993

5 Watson, S., "The initiation of fine grain pentaerythritol tetranitrate by laser-driven flyer plates" 88 : 65-69, 2000

6 Verker, R., "The effect of simulated hypervelocity space debris on polymers" 52 : 5539-5549, 2004

7 Roybal, R., "Simulated space debris impact experiments on toughened laminated thin solar cell cover glass" 23 : 811-821, 1999

8 Ocana, J. L., "Short pulse laser microforming of thin metal sheets for MEMS manufacturing" 254 : 997-1001, 2007

9 Miller, C. W., "Set-up and evaluation of laser-driven miniflyer system" Georgia Institute of Technology 2009

10 Di, J., "Micro-punching process based on spallation delamination induced by laser driven-flyer" 258 : 2339-2343, 2011

11 Swift, D. C., "Laser-launched flyer plates for shock physics experiments" 76 : 093907-, 2005

12 Paisley, D. L., "Laser-launched flyer plate and confined laser ablation for shock wave loading: Validation and applications" 79 : 023902-, 2008

13 Fairand, B. P., "Laser generation of high amplitude stress waves in materials" 50 : 1497-1502, 1979

14 Russo, R. E., "Laser ablation" 49 : 14A-28A, 1995

15 Incropera, F. P., "Introduction to Heat Transfer 5th edition" John Wiley & Sons 719-720, 2007

16 Kim, Y. H., "Interaction of beam and coated metals at high power continuous irradiation" 49 : 780-784, 2011

17 Hongo, T., "Flyer Acceleration by Pulsed Laser and its Application to Shock-Recovery Experiment on MnF2" 44 : 5006-5008, 2005

18 Gojani, A. B., "Extended measurement of crater depths for aluminum and copper at high irradiances by nanosecond visible laser pulses" 255 : 2777-2781, 2008

19 Han, T. H., "Biolistic injection of microparticles with high-power Nd:YAG laser" 49 : 3035-3041, 2010

20 Zhou, M., "Adhesion measurement of thin films by a modified laser spallation technique : theoretical analysis and experimental investigation" 74 : 475-480, 2002