스마트폰 곡면유리 성형시스템의 가압장치 설계 및 곡면유리 성형특성실험

다국어 초록 (Multilingual Abstract)

This paper describes the design of a force applying system for a smart phone curved glass molding system and its characteristic test. The force applying system is composed of a motor and gear, a rectilinear movement structure, a force sensor, an LVDT (Linear Variable Differential Transformer) sensor, an up and down moving block, and so on. The system precisely controls the applying force and time to the plane glass because the glass can be easily destroyed under applied force, and can be bent imperfectly. As a result of the characteristic test, the curved glass can be manufactured using this system, and the holding time under 0N force, the applying force to the plane glass, the time for applying from 0N to maximum force, and the holding time under maximum force at the manufacture feasible temperature 620℃ were found.

목차 (Table of Contents)

• Abstract
• Ⅰ. 서론
• Ⅱ. 가압시스템 설계 및 제작
• Ⅲ. 곡면유리 성형 특성실험 및 고찰
• Ⅳ. 결론
• REFERENCES

참고문헌 (Reference)

1 국금환, "전도방식 순차제조 비구면 렌즈 제조시스템 개발" 한국정밀공학회 28 (28): 202-210, 2011

2 국금환, "소형렌즈 성형시스템 개발 및 힘제어에 관한 연구" 한국정밀공학회 25 (25): 57-64, 2008

3 김갑순, "다축 힘/모멘트 센서 교정기의 개발 및 그의 불확도 평가" 한국정밀공학회 24 (24): 91-98, 2007

4 H. J. Shin, "Thermal analysis of molding system for mobile device cover glass" 765-766, 2013

5 K. H. Kuk, "Temperature analysis of the production system for aspherical lens and optimization of production conditions" 51-52, 2008

6 D. Y. Jung, "Pre-heating device of curved glass moulding device"

7 S. B. Kim, "Optimal design of 2.5D glass manufacturing automation equipment’s molding transfer unit using TRIZ" 777-778, 2013

8 ATI Industrial Automation, "Multi-Axis Forcre/Torque Sensor"

9 D. Y. Jung, "Moulding device of curved glass"

10 D. Y. Jung, "Moulding device"

11 H. J. Shin, "Heat flux conditions for uniform temperature distribution of mobile device cover glass mold" 763-764, 2013

12 G. S. Kim, "Development of force and position measuring system of the pressure system for manufacturing a smart Phone’s curved" 773-774, 2013

13 G. S. Kim, "Design of pressurized system for curved glass forming" 651-652, 2012