밀링 공구의 마모가 PMMA 임플란트 임시보철물 변연 및 내면적합도에 미치는 영향

다국어 초록 (Multilingual Abstract)

Purpose: The purpose of this study is to evaluate the effect of CAD/CAM system milling tool wear on the marginal and internal fit of PMMA implant interim prosthesis three-dimensional manner. Methods: A total of 20 crowns were fabricated with CAD/CAM method. Their designs were unified to first molar of the left maxilla. The Customized abutments were prepared and scanned with on optical model scanner. Five crowns were milled by the newly replaced tool (1st milling), and 15 crowns were milled by 2nd, 3rd, 4th milling tool. The marginal and internal fit of 20 interim crowns were measured using the triple-scan protocol. Results: Statistically significant difference was found between the 1st milling group (51.8±14.6μm) and the 3rd, 4th milling group (128.6±43.8μm, 146.2±38.1μm, respectively) at the distal margins. In the mesial margins, There was a statistically significant difference between the 1st milling group (63.6±25.9μm) and the 3rd, 4th milling group (137.2±25.9μm, 186.8±70.6μm, respectively). In the distal line angle, significant difference was found between the 1st, 2nd, 3rd milling groups and the 4th milling group. In the mesial axial wall, significant difference was found between the 1st milling group (52.2±20.3μm) and the 3rd, 4th milling groups (22.8±8.8μm, 7.8±5.7μm). Conclusion: As a result of the experiment, decrease of the marginal and internal fit was statistically significant as the number of machining cycles increased. In order to produce clinically excellent restorations, it is recommandable to consider the condition of the milling tool wear, when designing the restoration with CAD program.

목차 (Table of Contents)

• [Abstract]
• I. 서론
• II. 연구 방법
• 1. 지대치 제작 및 스캔
• 2. 크라운 디자인 및 밀링
• 3. 3차원 측정
• 4. 통계분석
• Ⅲ. 결과
• Ⅳ. 고찰
• Ⅴ. 결론
• REFERENCES

참고문헌 (Reference)

1 원성재, "초음파 진동에 따른 CFRP의 출구 구멍 버 생성" 한국기계가공학회 16 (16): 134-140, 2017

2 조병무, "볼 엔드밀 가공시 공구경로에 따른 절삭특성에 관한 연구" 한국생산제조학회 16 (16): 191-197, 2007

3 Lebon, "Understanding dental CAD/CAM for restorations-dental milling machines from a mechanical engineering viewpoint. Part B: labside milling machines" 19 (19): 115-134, 2016

4 신미선, "Replica technique과 Triple-scan protocol을 이용한 지르코니아 전부도재관의 변연 및 내면 적합도에 관한 비교 연구" 대한치과보철학회 55 (55): 372-380, 2017

5 Al-Omari WM, "Porcelain fracture resistance of screw-retained, cement-retained, and screw-cement-retained implantsupported metal ceramic posterior crowns" 19 : 263-273, 2010

6 Thilander B, "Osseointegrated implants in adolescents. An alternative in replacing missing teeth" 16 : 84-95, 1994

7 Schaefer O, "Marginal and internal fit of pressed lithium disilicate partial crowns in vitro: a three-dimensional analysis of accuracy and reproducibility" 28 (28): 320-326, 2012

8 Nejatidanesh F, "Marginal accuracy of interim restorations fabricated from four interim autopolymerizing resins" 95 : 364-367, 2006

9 Isil Karaokutan, "In vitro study of fracture strength of provisional crown materials" 대한치과보철학회 7 (7): 27-31, 2015

10 Holmes JR, "Considerations in measurement of marginal fit" 62 : 405-408, 1989

11 Yao J, "Comparison of the flexural strength and marginal accuracy of traditional and CAD/CAM interim materials before and after thermal cycling" 112 : 649-657, 2014

12 Bayramoglu E, "Comparison of marginal and internal fit of press-onmetal and conventional ceramic systems for three-and four-unit implant-supported partial fixed dental prostheses: an in vitro study" 114 : 52-58, 2015

13 Burns DR, "Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics. A review of selected dental literature on contemporary provisional fixed prosthodontic treatment: report of the Committee on Research in Fixed Prosthodontics of the Academy of Fixed Prosthodontics" 90 : 474-497, 2003

14 Matta RE, "Circumferential fit assessment of CAD/CAM single crowns-a pilot investigation on a new virtual analytical protocol" 43 : 801-809, 2012

15 Song DB, "Change in internal fit of dental CADCAM prothesis after continuous milling" D.K.U 2015

16 Cho BM, "A study on the geometric characteristics according to semi-cylindrical tool path in ball-end milling" 5 : 362-367, 2009

17 Holst S, "A new triple-scan protocol for 3D fit assessment of dental restorations" 42 : 651-657, 2011

18 Gaugel S, "A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers(CFRP)" 155 : 173-183, 2016