This paper is presented for the design of the thrust yoke for the spindle motors. HDD spindle motors are rotated by fluid dynamic bearing which consists of the shaft and the sleeve with the groove to generate the pressure. Because the thrust and journ...
This paper is presented for the design of the thrust yoke for the spindle motors. HDD spindle motors are rotated by fluid dynamic bearing which consists of the shaft and the sleeve with the groove to generate the pressure. Because the thrust and journal clearances between shaft and sleeve is too small, around Bum and 2.5um, respectively, it is very difficult to design the bearing to come up to the disks to read and write the data. By the way, it is also so hard to overcome the load of the disks with only the thrust bearing. So, the paper is proposed for the trust yoke to come up to the disks considering of the force of the thrust bearing. In this paper, we proposed the thrust yoke with an unique fluid dynamic bearing in comparison with the motors without thrust yoke. Experimental results show the performance of the thrust yoke of the spindle motors for an HDD.