Twist Wheel 방식 폐비닐수거기 개발에 관한 연구(Ⅱ) = A Study on the Development of Twist Wheel Type Waste Vinyl Remover (Ⅱ)-Development of Tractor Attached Vinyl Remover

다국어 초록 (Multilingual Abstract)

This study consist of two parts. One is development of a self-propelling vinyl remover which was already reported at the previous paper. This is the second part of the study. For the study, an attached vinyl remover was developed. It was consisted of connecting tractor to bucket, removing bucket from tractor, and the process was the tractor"s assistance hydraulics. In the case of an attached vinyl remover, the vinyl was twisted 0.5times per 30∼85cm length. The bobbin"s diameter was 190mm and it"s stable travelling speed was 1m/s. The revolution of the remover wheel was 90rpm to maintain the wheel"s linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10 a area, the average working speed was 1m/s and the turning time was 20seconds. Therefore, the working performance was 24.5min/10a. The efficiency of used vinyl remover was 97% and working conditions were good.

목차 (Table of Contents)

• ABSTRACT
• 1. 서론
• 2. 재료 및 방법
• 3. 결과 및 고찰
• 4. 결론
• 후기
• 참고문헌

참고문헌 (Reference)

1 FACT, "Test Method of vinyl remover"

2 FACT, "Standard of vinyl remover"

3 DAEDONG, "Specification of 3C100 type"

4 Koh, H. K, "Present Situation & Development Strategy of Implements for 4-wheel Tractor" 209-215, 1996

5 Lee, K. S, "Kinematic Simulation of Loader Mechanism mounted on Tractor" 28-34, 1996

6 Park, S. T, "Development of a Tractor Attached Rice Transplanter and Its Practicality on Rice Cultication" 14 (14): 143-150,