DMF함유 혼합 유기용제에 대한 인화점의 측정과 평가 = Measurement and Evaluation of Flash Point for the DMF Contained Organic Solvent Mixtures

다국어 초록 (Multilingual Abstract)

The flash points of DMF based organic solvent mixtures used in the synthetic leather manufacturing process weremeasured. The test group was composed of seven types of solvent mixtures, which included DMF, toluene, and MEK. Eachflash point was tested according to the international standard test methods of KS M 2010. The flash points were thenpredicted using some prediction models and compared with the measured data. From the analysis results, the binarymixtures with a mole ratio of less than approximately 0.7 showed that the measured values were under 25 ℃. This showedthat the expectation for the flammable risk lowering effects due to the mixing of high flash point materials was reduced.
In addition, the predicted values were evaluated using the average absolute deviation (A.A.D). The results showed that theLe Chatelier’s models had an “A.A.D” of 1.95 ℃ and were the closest to the measured values.

국문 초록 (Abstract)

본 연구에서는 합성피혁 제조 공정에서 주로 사용되는 혼합 유기용제 중에서 디메틸포름아마이드(Dimethylformamide,DMF)를 기준물질로 톨루엔과 메틸에틸케톤 등이 혼합된 2성분 및 3성분 혼합물질 7종류에 대하여 국제적으로 표준화된 시험방법을 이용하여 인화점을 측정하였다. 그리고 몇 가지 예측모델을 이용하여 인화점을 예측하고 실험결과와 비교하였다. 그 결과, 2성분 혼합물에서 DMF 몰분율이 약 0.7 이하인 경우는 혼합물의 인화점이 25 ℃이하로 관측되어, 고인화점 물질의 혼합에 의한 인화점상승에 대한 효과가 작은 것으로 나타났다. 그리고 평균온도차이를 이용하여 각 모델별 예측값을 평가한 결과, 르샤틀리에 모델의 경우가 1.95 ℃로 측정값에 가장 근사한 것으로나타났다.

참고문헌 (Reference)

1 하동명, "이성분계 용액의 최대인화점 현상의 측정과 예측" 한국화재소방학회 27 (27): 70-74, 2013

2 H. C. Choi, "Urinary Metabolites of Dimethylformamide, Methyl Ethyl Ketone, and Toluene Exposed Workers in Syntjetic Leather Factories" 11 (11): 135-144, 2001

3 하동명, "Tag 개방식 장치를 활용한 n-Decane + n-Octanol계 및Acetic Acid + n-Butanol계의 인화점 측정과 계산" 한국화재소방학회 29 (29): 45-50, 2015

4 KOSHA, "Report on the Distribution and Use of Chemical Substance-dimethylformaldehyde" 2004

5 F. Hshieh, "Note : Correlation of Closed-cup Flash Points with Normal Boiling Points for Silicone and General Organic Compounds" 21 : 277-282, 1997

6 "KS M 2010, Testing Methods for Flash Point of Crude Oil and Petroleum Products"

7 "KS M 1071-2, Determination of Boiling Temperature for Chemical Agents"

8 K. Satyarayana, "Improved Equation to Estimate Flash Points of Organic Compounds" 32 : 81-85, 1992

9 하동명, "Flash Points of the Binary Solutions Using Cleveland Open Cup Tester" 한국화재소방학회 25 (25): 57-62, 2011

10 L. Catoire, "Estimation of Closed Cup Flash Points of Combustible Solvent Blends" 35 (35): 9-14, 2006

11 이선우, "DMF를 사용하는 합성피혁 공장 인쇄공정의 산업환기시스템 평가 및 개선" 한국산업보건학회 19 (19): 113-126, 2009

12 C. L. Yaws, "Chemical Properties Handbook" McGraw-Hill 1999

13 L. Catoire, "A unique Equation to Estimate Flash Points of Selected Pure Liquids Application to the Correction of Probably Erroneous Flash Point Values" 33 (33): 2004