Effect of passive self-ligating bracket placement on the posterior teeth on reduction of frictional force in sliding mechanics

다국어 초록 (Multilingual Abstract)

Objective: The purpose of this study was to investigate the static (SFF) and kinetic frictional forces (KFF) in sliding mechanics of hybrid bracket systems that involve placing a conventional bracket (CB) or active self-ligating bracket (ASLB) on the maxillary anterior teeth (MXAT) and a passive SLB (PSLB) on the maxillary posterior teeth (MXPT). Methods: The samples consisted of two thoroughbred types (group 1, anterior-CB + posterior-CB; group 2, anterior-ASLB + posterior-ASLB) and four hybrid types (group 3, anterior-CB + posterior-PSLBtype 1; group 4, anterior-CB + posterior-PSLB-type 2; group 5, anterior-ASLB + posterior-PSLB-type 1; group 6, anterior-ASLB + posterior-PSLB-type 2) (n = 13 per group). After maxillary dentition alignment and maxillary first premolars removal in the stereolithographically-made typodont system, a 0.019 × 0.025-inch stainless steel wire was drawn through the right quadrant of the maxillary arch at 0.5 mm/min for 5 min. The SFF and KFF were measured with a mechanical testing machine and statistical analyses were performed. Results: Four different categories of SFF and KFF were observed among all groups (all p < 0.001). Group 1 demonstrated the highest SFF and KFF; groups 4 and 3 were second and third highest, respectively. The fourth category included groups 2, 5, and 6. Placing PSLBs on the MXPT resulted in significant SFF and KFF reductions in cases with CBs on the MXAT, but not in cases with ASLBs on the MXAT. Conclusions: These data might aid in the development of a hybrid bracket system that enables low-friction sliding of an archwire through the MXPT.

목차 (Table of Contents)

• INTRODUCTION
• MATERIALS AND METHODS
• RESULTS
• DISCUSSION
• CONCLUSION
• REFERENCES

참고문헌 (Reference)

1 Badawi HM, "Torque expression of self-ligating brackets" 133 : 721-728, 2008

2 Chung M, "Thirdorder torque and self-ligating orthodontic brackettype effects on sliding friction" 79 : 551-557, 2009

3 Andrews LF, "The six keys to normal occlusion" 62 : 296-309, 1972

4 Rinchuse DJ, "Self-ligating brackets:present and future" 132 : 216-222, 2007

5 Thorstenson GA, "Resistance to sliding of orthodontic brackets with bumps in the slot floors and walls: effects of second-order angulation" 20 : 881-892, 2004

6 Major TW, "Mechanical effects of third-order movement in self-ligated brackets by the measurement of torque expression" 139 : e31-e44, 2011

7 Paik CH, "Low-friction space closure with a hybrid bracket-tube system" 44 : 622-627, 2010

8 Tanaka E, "Longitudinal measurements of tooth mobility during orthodontic treatment using a periotest" 75 : 101-105, 2005

9 Cordasco G, "In vitro evaluation of the frictional forces between brackets and archwire with three passive self-ligating brackets" 31 : 643-646, 2009

10 Ehsani S, "Frictional resistance in self-ligating orthodontic brackets and conventionally ligated brackets. A systematic review" 79 : 592-601, 2009

11 Pizzoni L, "Frictional forces related to self-ligating brackets" 20 : 283-291, 1998

12 Henao SP, "Frictional evaluations of dental typodont models using four self-ligating designs and a conventional design" 75 : 75-85, 2005

13 Heo W, "Friction properties according to vertical and horizontal tooth displacement and bracket type during initial leveling and alignment" 81 : 653-661, 2011

14 Stefanos S, "Friction between various self-ligating brackets and archwire couples during sliding mechanics" 138 : 463-467, 2010

15 Franchi L, "Forces released during sliding mechanics with passive self-ligating brackets or nonconventional elastomeric ligatures" 133 : 87-90, 2008

16 Henao SP, "Evaluation of the frictional resistance of conventional and self-ligating bracket designs using standardized archwires and dental typodonts" 74 : 202-211, 2004

17 Tecco S, "Evaluation of the friction of self-ligating and conventional bracket systems" 5 : 310-317, 2011

18 Seo YJ, "Effect of tooth displacement and vibration on frictional force and stick-slip phenomenon in conventional brackets: a preliminary in vitro mechanical analysis" 37 : 158-163, 2015

19 Nakago T, "Determination of the tooth mobility change during the orthodontic tooth movement studied by means of Periotest and MIMD (the mechanical impedance measuring device for the periodontal tissue)" 105 : 92-96, 1994

20 Nursel Arici, "Comparison of the frictional characteristics of aesthetic orthodontic brackets measured using a modified in vitro technique" 대한치과교정학회 45 (45): 29-37, 2015

21 Kim TK, "Comparison of frictional forces during the initial leveling stage in various combinations of self-ligating brackets and archwires with a custom-designed typodont system" 133 : 187.e15-187.e24, 2008

22 Krishnan M, "Comparative evaluation of frictional forces in active and passive self-ligating brackets with various archwire alloys" 136 : 675-682, 2009

23 Oliver CL, "Archwire depth is a significant parameter in the frictional resistance of active and interactive, but not passive, self-ligating brackets" 81 : 1036-1044, 2011

24 Huang TH, "An in vitro comparison of the frictional forces between archwires and self-ligating brackets of passive and active types" 34 : 625-632, 2012

25 Brauchli LM, "Active and passive self-ligation: a myth? Part 1: torque control" 82 : 663-669, 2012

26 Brauchli LM, "Active and passive self-ligation-a myth?" 81 : 312-318, 2011

27 Budd S, "A study of the frictional characteristics of four commercially available self-ligating bracket systems" 30 : 645-653, 2008

28 Hain M, "A comparison of different ligation methods on friction" 130 : 666-670, 2006

29 Frank CA, "A comparative study of frictional resistances between orthodontic bracket and arch wire" 78 : 593-609, 1980

30 Souk Min Lee, "A comparative study of frictional force in self-ligating brackets according to the bracket-archwire angulation, bracket material, and wire type" 대한치과교정학회 45 (45): 13-19, 2015

31 Shivapuja PK, "A comparative study of conventional ligation and self-ligation bracket systems" 106 : 472-480, 1994