복합레진으로 제작한 인레이 보철물 구조에 따른 교합면 부위의 2차원 변연 적합도 및 내면 부위의 3차원 정확성 분석 = Analysis of the 2-dimensional marginal fit of the occlusal surface and the 3-dimensional accuracy of the inner surface of the occlusal surface according to the inlay prosthesis structure made of composite resin

다국어 초록 (Multilingual Abstract)

Purpose: To evaluate 2D and 3D of occulsal, mesial-occlusal and mesial-occlusal-distal cavity of composite resin inlay.
Methods: Abutment tooth 16, 36 of FDI system was selected for the study. Inlay prostheses classified as occlusal cavity (OC group), mesial-occlusal (MOC) and mesial-occlusal-distal cavity (MODC) were prepared using composite resin. Composite resin was injected with composite resin in prepared tooth cavity and then photopolymerized with UV light. Additional thermal polymerization was performed. Marginal gap of composite resin inlays were measured by digital microscope(x160) with silicone replica technique. The data was analyzed from statistical software for Kruskal-Wallis test (α=0.05). 3-dimensional analysis was analyzed through superimposition method.
Results: The smallest 2D marginal fit measure of the three groups was 47.0±21.6 μm in the MOC group. The largest 2D marginal was 69.1 ± 33.8 μm in the MODC group. In the trueness of the three groups, the most accurate figure was 14.4±2.3 μm for the MODC group. In Precision, the most accurate figure was 14.5±4.3 μm for the MODC group.
Conclusion : In this study, 2D marginal fit of OC, MOC, and MODC cavities fabricated with composite resin was applicable to all clinical applications. In the 3D inner surface accuracy evaluation, the MODC group showed the accuracy results.

참고문헌 (Reference)

1 정지선, "최신 충전기공학" 명문출판사 2008

2 이종혁, "지르코니아 코어의 종류와 도재 두께에 따른 색상의 변화" 대한치과기공학회 32 (32): 341-350, 2010

3 이상훈, "전치부 개방교합을 보이는 법랑질형성부전증 환자의 CAD/CAM system을 이용한 전악 수복 증례" 대한치과보철학회 55 (55): 410-418, 2017

4 정선영, "임플란트 만족도와 삶의 질 간의 관련성에 대한 구조방정식모델 분석" 대한치과보철학회 49 (49): 291-299, 2011

5 최수영, "수리된 복합레진 수복물의 전단결합강도 연구" 대한치과보존학회 27 (27): 569-576, 2002

6 김지영, "구치부 수복물의 재수복에 관한 연구" 대한치과보존학회 31 (31): 460-469, 2006

7 이재준, "구강 내 스캐너와 구강 외 스캐너를 사용하여 취득된 스캔 데이터 정확도 비교" 대한치과기공학회 37 (37): 191-197, 2015

8 Bae SY, "Three-dimensional analysis of marginal and internal fit of copings fabricated with polyetherketoneketone(PEKK) and zirconia" 61 : 106-112, 2017

9 Molin M, "The fit of gold inlays and three ceramic inlay systems: a clinical and in vitro study" 51 : 201-206, 1993

10 전진훈, "Repeatability and reproducibility of individual abutment impression, assessed with a blue light scanner" 대한치과보철학회 8 (8): 214-218, 2016

11 Ausiello P, "Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect restorations by CAD-FEM modeling" 33 : 690-701, 2017

12 Mormann WH, "Grinding precision and accuracy of fit of CEREC 2 CAD/CIM inlays" 128 : 47-53, 1997

13 Grenade C, "Fit of single tooth zirconia copings: comparison between various manufacturing processes" 105 : 249-255, 2011

14 김동연, "Evaluation of the reproducibility of various abutments using a blue light model scanner" 대한치과보철학회 10 (10): 328-334, 2018

15 Rippe MP, "Different methods for inlay production: effect on internal and marginal adaptation, adjustment time, and contact point" 42 : 436-444, 2017

16 Kim DY, "Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing" 62 : 56-64, 2018

17 Pjetursson BE, "All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multipleunit FDPs" 31 : 624-639, 2015

18 Christensen GJ, "Acceptability of alternatives for conservative restoration of posterior teeth" 7 : 228-232, 1995

19 배은정, "A study on the machining accuracy of dental digital method focusing on dental inlay" 대한치과보철학회 10 (10): 321-327, 2018

20 Cho BH, "A comparative study on marginal leakage of CAD/CAM-fabricated ceramic inlay" 22 : 702-709, 1997

21 Bosch G, "A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes" 112 : 1425-1431, 2014

22 김지환, "3종의 간접수복용 복합레진의 굴곡강도 비교 및 표면관찰" 대한치과기공학회 39 (39): 9-16, 2017