Ag-Pd 후막도체와 솔더범프 사이의 접합특성 및 계면반응 = Characteristics of Joint Between Ag-Pd Thick Film Conductor and Solder Bump and Interfacial Reaction

다국어 초록 (Multilingual Abstract)

The requirements for harsh environment electronic controllers in automotive applications have been steadily becoming more and more stringent. Electronic substrate technologists have been responding to this challenge effectively in an effort to meet the performance, reliability and cost requirements. An effect of the plasma cleaning at the ECM(Engine Control Module) alumina substrate and the intermetallic compound layer between Sn-37wt%Pb solder and pad joints after reflow soldering has been studied. Organic residual carbon layer was removed by the substrate plasma cleaning. So the interfacial adhesive strength was enhanced. As a result of AFM measurement, conductor pad roughness were increased from 304 nm to 330 nm. $Cu_6/Sn_5$ formed during initial reflow process at the interface between TiWN/Cu pad and solder grew by the succeeding reflow process, so the grains became coarse. A cellular-shaped $Ag_3Sn$ was observed at the interface between Ag-Pd conductor pad and solder. The diameters of the $Ag_3Sn$ grains ranged from about 0.1∼0.6 $\mu\textrm{m}$. And a needle-shaped was also observed at the inside of the solder.

참고문헌 (Reference)

1 "Rapid Power Cycling of Flip-chip and CSP Components on Ceramic Substrates" 41 : 661-668, 2001

2 "Plasma Cleaning of Plastic Ball Grid Array Package" 39 : 97-105, 1999

3 "Plasma Cleaning of Copper Leadframe with Ar and Ar/H2 Ggases" 245-249, 1999

4 "Microstructural Evolution in Sn/Pb Solder and Pd/Ag Thick Film Conductor Metallization" 653-657, 1991

5 "Interface Reaction between Ag-Pd Conductor and Pd-Sn Solder" 21 (21): 394-397, 1998

6 "Fundamentals of Microsystems Packaging" McGraw-Hill 101-105, 2001

7 "Emerging Substrate Technologies for Harsh-Environment Automotive Electronics Applications" Society of Automotive Engineers, Inc inc : 2002

8 "Diffusion and Intermetallics Formation between Pd/Ag Metallization and Sn/Pb/Ag Solder in Surface Mount Solder Joints" 57 : 116-126, 1999