중심압축력을 받는 기계구조용 스테인리스강 강관 기둥의 좌굴거동에 관한 실험적 연구

다국어 초록 (Multilingual Abstract)

Buckling behaviors of cold-formed duplex stainless steel (STS329FLD TKC) and austenitic stainless steel (STS304 TKC) hollow tubular column subjected to concentric axial compression were investigated in this study. A total number of 8 specimens with both fixed ends has been tested. Main variable is slenderness ratio (four kinds of column length : 250 mm, 500 mm, 750 mm, 1000mm) with identical nominal diameter and plate thickness. Yield stress and tensile strength of duplex stainless steel were higher by 41% and 18%, respectively than those of austenitic stainless steel. Local buckling, global buckling and its combination were observed according to column length(slenderness ratio). Buckling strength got lower with the increase of member length (slenderness ratio). Test buckling strengths were compared with those predicted by the ASCE(American Society of Civil Engineers) specification, Eurocode 3 part 1.4 (EC3) and existing literature’ suggestion. Strengths of specimens with local buckling were underestimated by current design codes and for specimens with global buckling, ASCE2002 and EC3 overestimated the buckling strengths by the range of 2% to 26% due to no enough consideration of buckling reduction factor, slenderness ratio, buckling stress and initial imperfection effect.

참고문헌 (Reference)

1 장호주, "중심압축하중을 받는 스테인리스 강관 기둥의 좌굴내력에 관한 연구" 한국강구조학회 17 (17): 207-216, 2005

2 장호주, "스테인리스강관과 일반구조용강관 단주내력 비교에 관한 연구" 한국강구조학회 15 (15): 561-570, 2003

3 장호주, "스테인리스 강관 기둥의 내력에 관한 연구" 대한건축학회 19 (19): 93-102, 2003

4 강현식, "듀플렉스계 스테인리스강 2행 2열 볼트접합부의 구조거동에 관한 실험적 연구" 한국강구조학회 31 (31): 13-22, 2019

5 한국기술표준원, "냉간 압연 스테인리스 강판 및 강대"

6 한국기술표준원, "기계 구조용 스테인리스강 강관"

7 薄板構造設計基準作成委員会, "軽量ステンレス構造デザインマニュアル"

8 Buchanan, C., "Testing, Simulation and Design of Cold-formed Stainless Steel CHS Columns" Queensland University of Technology 130 : 297-312, 2018

9 Theofanous, M., "Structural Response of Stainless Steel Oval Hollow Section Compression Members" Elsevier 31 (31): 922-934, 2009

10 American Society of Civil Engineers, "Specification for the Design of Cold-Formed Stainless Steel Structural Members"

11 Hwang, B, "Mechanical Strength of Cold-Formed Duplex Stainless Steel (STS329FLD) Fillet-Welded Connections with Weld Metal Fracture" Korean Society for Precision Engineering 2018

12 Ehab Ellobody, "Investigation of cold-formed stainless steel non-slender circular hollow section columns" 국제구조공학회 7 (7): 321-337, 2007

13 European Committee for Standardization, "Eurocode 3: Design of Steel Structures, Part 1.4: General Rules-Supplementary Rules for Stainless Steel"

14 Ramberg W., "Description of Stress Strain Curves by Three Parameters" National Advisory Committee for Aeronautics 1943

15 Ben Young, "Column design of cold-formed stainless steel slender circular hollow sections" 국제구조공학회 6 (6): 285-302, 2006

16 Standards Australia/Standards New Zealand, "Coldformed Stainless Steel Structures"