Dynamic Characteristic Evaluation of the Bucket Elevator Chain Pin and Plate

다국어 초록 (Multilingual Abstract)

This research analyzes bucket elevator roller chain pins by finite element (FE) analysis and static structural analysis for a lightweight pin design. The stress distribution of light weight roller chain pins under static load is analyzed for safety factors and damping effect. The results show that the stress distribution is higher on the plate than on the bush pin. In order to compare experimental and FE analysis results, a light weight design approach was used to produce a prototype base pin. Because the inner diameter of the pin was different, the impact damping effect was most appropriate when the inner diameter was 34.05 ㎜, and it is used as basic research data on the impact of the roller chain and sprocket.

참고문헌 (Reference)

1 김창욱, "고하중용 버킷 롤러체인 시스템의 다물체 동역학해석 및 내구성 연구" 한국정밀공학회 33 (33): 919-925, 2016

2 Choi, W., "Vibration of Roller Chain Drives with and without a Tensioner" University of Michigan 1993

3 Wang, K., "On the Noise and Vibration of Chain Drive Systems" 23 (23): 8-13, 1991

4 Liu, S., "On the Impact Intensity of Vibrating Axialiy Moving Roller Chains" 114 : 397-, 1992

5 Veikos, N., "On the Dynamic Analysis of Roller Chain Drives : Part II-Case Study" 46 : 441-450, 1992

6 Veikos, N., "On the Dynamic Analysis of Roller Chain Drives : Part I-Theory" 46 : 431-439, 1992

7 Pedersen, S. L., "Model of Contact between Rollers and Sprockets in Chain-Drive Systems" 12 (12): 285-301, 1991

8 Bhoite, T. D., "Fea based Study of Effect of Radial Variation of Outer Link in a Typical Roller Chain Link Assembly" 1 (1): 2012

9 Noguchi, S., "Evaluation of Wear between Pin and Bush in Roller Chain" 3 (3): 355-365, 2009

10 Dubowsky, S., "Dynamic Analysis of Mechanical Systems with Clearances, Part 2 : Dynamic Response" 310-316, 1971

11 Dubowsky, S., "Dynamic Analysis of Mechanical Systems with Clearances, Part 1 : Formation of Dynamic Model" 305-309, 1971