무보강 상·하부 ㄱ형강 접합부의 소성휨모멘트 저항능력 예측을 위한 실험 및 해석적 연구 = Experimental Tests and Analytical Study for the Prediction of the Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection

국문 초록 (Abstract)

무보강 상 하부 ㄱ형강 접합부는 중 저층 강골조의 시공에 적합한 부분강접 접합부의 한 형태이다. 무보강 상 하부 ㄱ형강 접합부의 초기회전강성뿐만 아니라 소성휨모멘트 지지능력은 실제 설계 및 시공에 있어서 매우 중요한 인자로 이에 대한 예측이 반드시 필요하다. 따라서 그동안 진행된 무보강 상 하부 ㄱ형강 접합부에 대한 연구는 초기회전강성 및 소성휨모멘트 지지능력에 영향을 미치는 접합부의 기하학적 형상을 변화시키면서 거동양상을 파악하였다. 이 연구에서는 AISC LRFD Spec.에서 정의한 Type A 형태 접합부의 상부 ㄱ형강의 두께 및 고력볼트 게이지 거리를 변수로 하여 접합부 실험을 수행하여 휨모멘트 지지능력을 파악하였고, 이를 바탕으로 소성휨모멘트 지지능력 예측을 위한 해석모델을 제안하고자 진행하였다. 해석모델 적용의 타당성은 타 연구자가 수행한 접합부 실험결과와 비교 검토함으로써 입증하였다.

다국어 초록 (Multilingual Abstract)

An unstiffened top and seat angle connection is a type of partially restrained connection that is suitable for low- and medium-rise steel buildings. The plastic moment resisting capacity of such connection is needed in practical design, in addition to the accurate prediction of the initial rotational stiffness. Therefore, most of the studies conducted for the mentioned connections were performed to predict the initial stiffness and the plastic moment resisting capacity with varying geometric properties. The main parameters of such experimental tests were the thickness and high-strength bolt gauge distance of AISC LRFD-type A top and seat angle connections. Based on the test results, the analytical model was also proposed in this study. The applicability of the proposed model was verified by comparing the test results from this study with those of other studies.

참고문헌 (Reference)

1 Richard, R. M, "Versatile elastic-plastic stress-strain formula" ASCE 101 : 511-515, 1975

2 Jaspart, J. P., "The stiffness model of Revised Annex J of Eurocode 3" 1995

3 Faella, C., "Structural steel semi-rigid connections: Theory, design, and software" CRC Press 2000

4 Thornton,W.A, "Strength and serviceability of hanger connections" AISC 29 : 145-149, 1992

5 Thornton,W.A, "Strength and ductility requirements for simple shear connections with shear and axial load" AISC 1-17, 1997

6 Azizinamini, A., "Static and cyclic behavior of semi-rigid steel beam-column connections" Structural Res. Studies, Dept. of Civil Eng., Univ. of South Carolina 1985

7 Chen, W. F, "Stability design of steel frames" CRC Press 1991

8 Lorenz, R. F., "Semi-rigid connections in steel frames, CTBUH" McGraw-Hill 1992

9 Hechtman, R. A, "Riveted semi-rigid beam-to-column building connections" AISC research at Lehigh University 1947

10 Thornton,W.A, "Prying action: A general treatment" AISC 22 : 67-75, 1985

11 Faella, C., "Prediction of the flexural resistance of bolted connections with angles" 25-27, 1996

12 Jaspart, J. P, "Plasticcapacity of end-plate and flange cleated connections: Prediction and design rules" Proc. Second International Workshop on Connectionsin Steel Structures 1991

13 Reinosa, J. M., "Nonlinear elastic-plastic3D finite element modeling - top and seat angle connection with double web angle" EURO STEEL 2008 501-506, 2008

14 Ahmed, A., "Nonlinear analysis on prying of top- and seat-angle connections" 4 : 2001

15 Kishi, N, "Moment-rotation relations of semi-rigid connections with angles" ASCE 116 : 1813-1834, 1990

16 Chen, W. F, "Moment-rotation relation of top and seatangle connections" USSR 15-20, 1989

17 Altman, W. G., "Moment-rotation characteristics of semi-rigid steel beam-to-column connections" Dept. of Civil Eng., Univ. of South Carolina 1982

18 Pirmoz, A., "Moment-rotation behavior of bolted top and seat angle connections" 65 : 973-984, 2009

19 AISC, "Manual of steel construction, American Institute of Steel Construction, 13th Edition" American Institute of Steel Construction 2005

20 Chen,W.F, "Joint flexibility in steel frames" Elsevier Applied Science 1987

21 Faella, C., "Experimental analysis of bolted connections: Snug vs. preloaded bolts" ASCE 124 : 765-774, 1998

22 Jaspart,J.P, "Etude de la Semi-rigidite des Noeuds Poutre-Colonne etson Influence sur la Resistance et la Stabilitedes Ossaturesen Acier" University of Liege 1991

23 Komuro, M., "Elasto-plastic FE Analysis on moment-rotation relations of top- and seat-angle connections" Connections in Steel Structures V 2004

24 Kishi, N., "Effects of gauge distance of angle on moment-rotation behavior of top- and seat-angle connections, Stessa 2009" Taylor& Francis Group, London 167-172, 2009

25 Richard, R. M., "Derived moment-rotation curves for double-framing angles" 3 : 485-494, 1988

26 양재근, "Analytical Models for the Initial Stiffness and Plastic Moment Capacity of an Unstiffened Top and Seat Angle Connection under a Shear Load" 한국강구조학회 9 (9): 195-205, 2009

27 Thornton,W.A, "A rational approach to the design of tee shear connections" AISC 33 : 34-37, 1996

28 Yang, J. G., "A finite element modelfor the prediction of the behavior of an unstiffened top and seat angle connection with various top angle bolt gage distances" 10 (10): 2011